Muhammad Shahbaz Akhtar

Muhammad Shahbaz Akhtar


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
SFSania Fiaz
Sania Fiaz
SASohaib Aslam
Sohaib Aslam
SCShinho Chung
Shinho Chung
Allah DittaAllah Ditta
Allah Ditta
YNYoshitaka Nakashima
Yoshitaka Nakashima
In the current arena, new-generation functional nanomaterials are the key players for smart solutions and applications including environmental decontamination of pollutants. Among the plethora of new-generation nanomaterials, graphene-based nanomaterials and nanocomposites are in the driving seat surpassing their counterparts due to their unique physicochemical characteristics and superior surface chemistry. The purpose of the present research was to synthesize and characterize magnetite iron oxide/reduced graphene oxide nanocomposites (FeNPs/rGO) via a green approach and test its application in the degradation of methylene blue. The modified Hummer's protocol was adopted to synthesize graphene oxide (GO) through a chemical exfoliation approach using a graphitic route. Leaf extract of Azadirachta indica was used as a green reducing agent to reduce GO into reduced graphene oxide (rGO). Then, using the green deposition approach and Azadirachta indica leaf extract, a nanocomposite comprising magnetite iron oxides and reduced graphene oxide i.e., FeNPs/rGO was synthesized. During the synthesis of functionalized FeNPs/rGO, Azadirachta indica leaf extract acted as a reducing, capping, and stabilizing agent. The final synthesized materials were characterized and analyzed using an array of techniques such as scanning electron microscopy (SEM)-energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis, and UV–visible spectrophotometry. The UV–visible spectrum was used to evaluate the optical characteristics and band gap. Using the FT-IR spectrum, functional groupings were identified in the synthesized graphene-based nanomaterials and nanocomposites. The morphology and elemental analysis of nanomaterials and nanocomposites synthesized via the green deposition process were investigated using SEM–EDX. The GO, rGO, FeNPs, and FeNPs/rGO showed maximum absorption at 232, 265, 395, and 405 nm, respectively. FTIR spectrum showed different functional groups (OH, COOH, C=O), C–O–C) modifying material surfaces. Based on Debye Sherrer's equation, the mean calculated particle size of all synthesized materials was < 100 nm (GO = 60–80, rGO = 90–95, FeNPs = 70–90, Fe/GO = 40–60, and Fe/rGO = 80–85 nm). Graphene-based nanomaterials displayed rough surfaces with clustered and spherical shapes and EDX analysis confirmed the presence of both iron and oxygen in all the nanocomposites. The final nanocomposites produced via the synthetic process degraded approximately 74% of methylene blue. Based on the results, it is plausible to conclude that synthesized FeNPs/rGO nanocomposites can also be used as a potential photocatalyst degrader for other different dye pollutants due to their lower band gap.

8 December 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
SDSarah Dean
Sarah Dean
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
Allah DittaAllah Ditta
Allah Ditta
MVMohammad Valipour
Mohammad Valipour
SASohaib Aslam
Sohaib Aslam
Phosphorous (P) is one of the primary nutrients to cause the eutrophication of water bodies. This process leads to algal blooms and anoxic conditions which have consequences in the form of mortality of aquatic animals, and impaired water quality. Aquatic macrophytes could be the promising candidates that can filter P from water contaminated with high levels of nutrients. In the present microcosm research, two types of floating macrophytes, i.e., salvinia floater (Salvinia natans) and water lettuce (Pistia stratiotes) were deployed to compare their P-removal rates and efficiency under different incubation times (72, 168, and 264 h intervals). Plants were exposed to different treatments, i.e., (1) P-fed plants, (2) P-starved plants, (3) control treatments, and (4) synthetic wastewater treatment. Both plant species showed substantial P-removal efficiency from P-eutrophicated solutions and removed P-amounts were significantly correlated (R2 ≅ 1 at p ≤ 0.05) with P-accumulated in plant biomass. Plants in the P-starved state showed significantly higher P-removal rates and removal efficiency compared to plants without P-starvation. When Salvinia natans was exposed to 10 mg L−1 of P for 264 h of incubation, 21 g of fresh biomass was recorded during the P-starved phase, more than P. stratiotes (14 g) under similar conditions. The P. stratiotes removed 86.04% of P from 5 mg L−1 P solution, 53.76% from 10 mg L−1 P solution and 66.84% from SWW in the P-starved phase whereas, removal efficiency without the P-starvation phase was 33.03% from 5 mg L−1 P solution, 39.66% from 10 mg L−1 P solution, and 31.64% from SWW after 264 h interval. Compared to S. natans, P. stratiotes removed 86.0% P from a 5 mg L−1 P solution, whereas S. natans removed 56.6% when exposed to the same P solution (5 mg L−1 P solution). Bioconcentration factor (BCF) values were higher in Salvinia natans 10.5 (0.5 mg L−1 P solutions) and 1.5 (5 mg L−1 P solutions) compared to 9.9 and 1.3 of Pistia stratiotes under P-starved conditions. The present work highlighted that these aquatic plants can be a potential green sustainable solution for purifying water with excessive nutrients (N and P), especially waters of wetlands, lagoons, and ponds.

4 October 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
DJDeborah Sohrab Rustam Jutt
Deborah Sohrab Rustam Jutt
SASohaib Aslam
Sohaib Aslam
RNRab Nawaz
Rab Nawaz
MIMuhammad Atif Irshad
Muhammad Atif Irshad
MZMagdi Zaki
Magdi Zaki
Graphene-based nanomaterials have been proved to be robust sorbents for efficient removal of environmental contaminants including arsenic (As). Biobased graphene oxide (bGO-P) derived from sugarcane bagasse via pyrolysis, GO-C via chemical exfoliation, and magnetite nanoparticles (FeNPs) via green approach using Azadirachta indica leaf extract were synthesized and characterized by Ultraviolet-Visible Spectrophotometer (UV-vis.), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), mean particle size and Scanning electron microscopy (SEM) along with Energy dispersive spectroscopy (EDX) analysis. Compared to cellulose and hemicellulose, the lignin fraction was less in the precursor material. The GOC, bGO-P and FeNPs displayed maximum absorption at 230, 236, and 374 nm, respectively. FTIR spectrum showed different functional groups (C-OH, C-O-C, COOH and O-H) modifying the surfaces of synthesized materials. Graphene based nanomaterials showed clustered dense flakes of GO-C and thin transparent flakes of bGO-P. Elemental composition by EDX analysis of GO-C (71.26% C and 27.36% O), bGO-P (74.54% C and 24.61% O) and FeNPs (55.61% Fe, 4.1% C and 35.72% O) confirmed the presence of carbon, oxygen, and iron in synthesized nanomaterials. Sorption study was conducted with soil amended with different doses of synthesized nanomaterials (10, 50 and 250 mg) and exposed to 100, 300 and 500 ppm of As. Arsenic concentrations were estimated by colorimetry and atomic absorption spectroscopy (AAS). GO-C, bGO-P, and FeNPs showed substantial As removal efficiency i.e., 81 to 99.3%, 65 to 98.8% and 73.1–89.9%, respectively. Green synthesis of bGO-P and magnetite nanoparticles removed substantial amounts of As compared to GO-C and can be effectively deployed for As removal or immobilization. Higher and medium sorbent doses (250 and 50 mg) exhibited greater As removal and data was best fitted for Freundlich isotherm evidencing favorable sorption. Nevertheless, at low sorbent doses, data was best fitted for both models. Newly synthesized nanomaterials emerged as promising materials for As removal strategy for soil nano-remediation and can be effectively deployed in As contaminated soils.

20 December 2022 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
AHAhmad Hameed
Ahmad Hameed
SASohaib Aslam
Sohaib Aslam
RURazi Ullah
Razi Ullah
AKAima Kashif
Aima Kashif

28 December 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
SASohaib Aslam
Sohaib Aslam
Allah DittaAllah Ditta
Allah Ditta
BABedur Faleh Albalawi
Bedur Faleh Albalawi
YOYoko Oki
Yoko Oki
YNYoshitaka Nakashima
Yoshitaka Nakashima
The phytoremediation potential of aquatic plants, particularly for Cu, is scarcely reported in the pertinent literature. In this regard, differential growth behavior and phytoaccumulation ability of three free-floating Azolla species (A. japonica, A. pinnata, and A. hybrid) were evaluated in a climatically controlled (a temperature of 25/20 °C, light/dark 16/8 h, a light intensity of 60 µmol m−2 s−1, and a relative humidity of 65%) microcosm study. Azolla plants were exposed to solutions having three Cu concentrations (0, 3, and 6 mg L−1) under two incubation periods (4 and 8 days). Different Cu treatments significantly reduced Azolla biomass during both incubation periods and A. pinnata was the most sensitive species. Azolla plants grown in aqueous solutions showed substantial variations in Cu removal capacity. Higher bioconcentration values displayed by Azolla plants indicated that these plants can be deployed as potential plants for Cu removal from Cu contaminated water. Nevertheless, the plants exposed to higher Cu concentrations displayed color changes and root detachment due to Cu phytotoxic effects which may also ultimately lead to plant death. Significant correlations between Cu removed from the aqueous solutions and Cu contents of plant biomass indicated that Cu phytoremediation by Azolla plants was due to the phytoaccumulation mechanism because the removed Cu from aqueous solutions was accumulated in plant biomass. Introduced Azolla species, i.e., A. hybrid, displayed comparable Cu removal efficiency with naturally grown Azolla species, i.e., A. japonica and A. pinnata. Tested Azolla species proved to be suitable candidates to remediate Cu contaminated water and can be deployed for phytoremediation.

5 October 2023 in Turkish Journal of Engineering
Verified
Journal Article
Open access
PDF file
MAMuhammad Shahbaz Akhtar
Muhammad Shahbaz Akhtar
Bentonite is a natural and finite mineral resource. Dilute suspensions of sodium montmorillonite clay in water represents bentonite slurries. Suspension and orientation of colloidal clay particles define rheological properties in bentonite slurry (BS). The BS has been used about seventy years to temporarily support the excavations. More recently, polymer support fluids (PSF) gained much popularity and are widely used compared to bentonite support fluids. The PSF are categorized into natural (pure) and synthetic polymers. Physico-chemical properties of PSF are different than BS irrespective of the quite similarity in the mode of action. Synthetic polymer fluids are molecularly engineered fluids that can be a popular alternative of conventional BS deployed as excavation support fluids in different foundation applications such as diaphragm wall panels and pile bores. The synthetically engineered fluids of polymers (water-soluble) are different from conventional BS. The PSF offer additional benefits because their use is cost effective, eco-friendly, and these polymers need smaller site footprint as well as easy preparation, mixing, handling, management and ultimately the final disposal. Nevertheless, synthetic polymers have advantage over bentonite, however, foundation engineers and scientists have also certain concerns about their use because of their performance related issues. For an efficient use of polymers, specific properties and in situ behavior of polymers as well as their sorption onto the soils must be recognized because the polymer concentration in the solution is decreased with time during their use. The present manuscript reviewed the relative performance of excavation support fluids and displayed an arranged marriage of physicochemical and rhelogical properties of natural and synthetic excavation support fluids used in the foundation industry. This information will be highly useful to scientific community for their future ventures and will lay a foundation to understand the mechanisms of stabilization in open and deep excavations.