Electric vehicles are considered by many as an emission-free or low-emission solution to meet the challenge of sustainable transportation. However, the operational input, electrical energy, has an associated cost, greenhouse gasses, which results in indirect emissions. Given this knowledge, we pose the following question: “Are zero-emission transportation targets achievable given our current energy mix?” The objective of this article is to assess the impact of a grid’s energy mix on the indirect emissions of an electric vehicle. The study considers real-world data, vehicle usage data from an electric vehicle, and carbon intensity data for India, the USA, France, the Netherlands, Brazil, Germany, and Poland. Linear programming-based optimization is used to compute the best charging scenario for each of the given grids and, consequently, the indirect emissions are compared to those of a high-efficiency 1.5 L diesel internal combustion engine for the vehicle: a 2019 Renault Clio dCi 85. The results indicate that for grids with low renewable energy penetration, such as those of Poland and India (Maharashtra), an electric vehicle, even when optimally charged, can be classified as neither a low- nor zero-emission alternative to normal thermal vehicles. Also, for grids with elevated levels of variation in their carbon intensity, there is significant potential to reduce the carbon footprint related to charging an electric vehicle. This article provides a real-world perspective of how an electric vehicle performs in the face of different energy mixes and serves as a precursor to the development of robust indicators for determining the carbon reductions related to the e-mobility transition.
This paper proposes an approach dedicated to power electronics preliminary design. It consists in setting the optimization problem in an “imaginary” world by considering all decision variables to be continuous. The method is illustrated in detail with the real case study of an Interleaved Buck Converter. The models used are briefly described, and the focus is also placed on all possible applications of such a quick design methodology: considering several operating points, checking various candidate technologies and negotiating the specifications of the converter with the partners.