Fragile Tin Oxide Electrodes: While tin oxide has a high energy density, and would thus make an attractive anode material for a Li-ion battery, it undergoes significant volume changes when Li is intercalated. The large strains cause cracking, pulverization, and a resultant loss of electrical conduction.
Huang
et al. (p. 1515 ; see the Perspective by Chiang ) used in situ transmission electron microscopy on a single tin oxide nanowire to identify the physical changes that occur during intercalation and observed a moving cloud of dislocations that separated the reacted and unreacted sections. Upon completion of the electrochemical charging, the nanowire showed up to 90% elongation and a 35% increase in diameter.
We report a simple procedure for fabricating flexible, free-standing, and magnetic film of GO/CNT–Fe3O4 composites by using a one-pot co-precipitation in situ growth route. Characterizations including X-ray diffraction, Raman spectroscopy, superconducting quantum interference device magnetometry, scanning electron microscopy and transmission electron microscopy have been carried out to investigate the morphology, crystalline structure and magnetic properties of the composites. The layered structure of the as-prepared composites is porous and superparamagnetic. The GO/CNT–Fe3O4 composites exhibit excellent microwave absorbing properties in the range of 2–18 GHz and are expected to be promising candidates as microwave absorbing materials.
Maintaining the stability of single-atom catalysts in high-temperature reactions remains extremely challenging because of the migration of metal atoms under these conditions. We present a strategy for designing stable single-atom catalysts by harnessing a second metal to anchor the noble metal atom inside zeolite channels. A single-atom rhodium-indium cluster catalyst is formed inside zeolite silicalite-1 through in situ migration of indium during alkane dehydrogenation. This catalyst demonstrates exceptional stability against coke formation for 5500 hours in continuous pure propane dehydrogenation with 99% propylene selectivity and propane conversions close to the thermodynamic equilibrium value at 550°C. Our catalyst also operated stably at 600°C, offering propane conversions of >60% and propylene selectivity of >95%.