Aluminium and its alloys are lightweight, corrosion-resistant, affordable and high-strength material and find wide applications in shipbuilding, automotive, constructions, aerospace and other industrial sectors. In applications like aerospace, marine and automotive industries, there is a need to join components made of different aluminium alloys, viz. AA6061 and AA5083. In this study friction stir welding (FSW) is used to join dissimilar plates made of AA6061-T6 and AA5083-O. The effect of varying tool pin profile, tool rotation speed, tool feed rate and tilt angle of the tool has been investigated on the tensile strength and percentage elongation of the welded joints. Box-Behkan design, with four input parameters and three levels of each parameter has been employed to decide the set of experimental runs. The regression models have been developed to investigate the influence of welding variables on the tensile strength and elongation of the welded joint. It is revealed that with the increase in welding parameters like tool rpm, tool feed rate and tilt angle of the tool, both the mechanical properties increase, reach a maximum level, followed by a decrease with further increase in the value of parameters. Amongst different types of tool pin profiles used, the FSW tool having straight cylindrical (SC) pin profile is found to yield the maximum strength and elongation of the welded joint for different combinations of welding parameters. Multiple response optimization indicates that the maximum UTS (135.83 MPa) and TE (4.35%) are obtained for the welded joint fabricated using FSW tool having SC pin profile, tilted at 1.11° and operating at tool speed and feed rate of 1568 rpm and 39.53 mm/min., respectively.

Lubrication and cooling (LC) are critical for mechanical devices’ effective and dependable functioning, because they decrease friction and wear of moving components, ensuring superior efficiency. However, the cutting fluids in machining operations are a key cause of fear, due to their high cost, environmental impact, and health risks, particularly in computer numerical control (CNC) machine tools (MTs). During the industrial revolutions, MTs superseded manual labour and increased efficiency and output. Therefore, much research was conducted on lubrication and cooling in CNC machine tools (LC in CNC MTs). Therefore, it has become necessary to review and highlight research hotspots and gaps using specific means that can benefit budding researchers. The present review aims to identify research hotspots and gaps of LC in CNC MTs utilizing content and visualization analysis, employing VOSviewer and Biblioshiny software. The analysis comprises 136 documents retrieved by Scopus between 1988 and 2022. The analysis revealed a consistent growth in publications, primarily consisting of articles, with a minor proportion of review documents and conference papers. The keywords were categorized into seven clusters, with a notable prevalence of ‘surface roughness’ and ‘CNC machine tools’. A word cloud was generated to visualize the author’s frequently used keywords, where larger font sizes represented higher frequency. The treemaps demonstrated that ‘CNC’ appeared 34 times and contributed 8%, followed by ‘machine’, ‘tool’, ‘machining’, and ‘thermal’. In the abstract-terms tree plot, ‘machine’ appeared 235 times and contributed 7%, followed by ‘CNC’, ‘machining’, ‘tool’, and ‘cutting’. The content and visualization analysis identified six research hotspots: computer control systems, machine tools, computer numerical control, machining, numerical control systems, and surface roughness (Ra). The research gaps are temperature, cooling systems, cutting forces, energy utilization, tool life, nanoparticles, electric power utilization, and energy conservation. Based on hotspots and gaps, literature evaluations extensively addressed the strong roadmap of technical improvements and problems of LC in CNC MTs. A complete visualization and content analysis also produced a conceptual framework for best practices, and the study offers insight into the issues and prospects.

The necessity of modern intensive care units (ICU) based on IoT is becoming obvious as a result of the population boom and, most notably, coronavirus disease (COVID-19). The continual monitoring of patients' vital indicators (Blood Pressure, ECG, Heart Rate, Blood Saturation, Body Temperature) is one of the most important aspects of an ICU. Existing improvements in informatics, signal processing, or engineering, which potentially reduce the pressure on ICUs, have yet to be implemented. It's possible due to a lack of user participation in research and development. This manuscript focuses on the improvement of a completely integrated system where the doctors can directly connect to patients through the Smart Portable ICU, and physicians can access the patients. Thus, the crucial boundaries of a patient to the concerned specialist at a far-off position have been resolved simply and helpfully. Thus, the specialist can attend to the patient remotely and infuse lifesaving drugs from the distant area if necessary.

The paper reviews the basic principles of friction stir welding, its methodology, and all other technical aspects. As reported by different researchers, the effect of varying welding variables such as tool geometry, tool-tilt angle and tool materials on the microstructure and mechanical properties of the welded materials, and weld quality are reported and discussed. The paper covers the various mechanical and metallurgical properties of similar/dissimilar aluminium alloys and other metal joints welded using friction stir welding (FSW). The attempt has been made to present a comprehensive review of some of the salient works carried out by various researchers pertaining to friction stir processing (FSP) /FSW of aluminium alloys. The paper also identifies the existing research gaps in the area of FSW, which should be explored in future.

This paper represents the design and development of a smart wheelchair that can transform into bed and has an Internet of Things (IoT) based infusion pump. Very little work has been explored in the area of fabrication of smart wheelchairs. Survey reported by NSSO in 2011 showed that disability is a public health problem in our country and a wheelchair is the most important equipment used for disable people. A wheelchair that can transform into bed performs a better solution for a disable person. It has been also analysed that for a disable person or in an emergency situation there is need of some advanced technology that can transfer patient medical data to the doctor, so that an emergency medicine can be provided to the patient. By understanding all these problems current work focuses on the design and fabrication of a smart wheelchair cum bed which enables an IoT based infusion pump unit. The design is done by keeping in mind the safety of the patient, stability of design structure, and durability of the unit. This prototype can easily be movable due to its foldable feature. Vital parameters of the patient will be transmitted to the doctor's mobile using an android application and the doctor can control the infusion drug supply through its mobile from a remote location. This integrated medical convertible wheelchair enabled with IoT based infusion pump and vital parameter unit can be used at home, hospital or inside an ambulance. This research work helps a lot to society due its ergonomic design and advanced features.