Soft actuators typically exhibit low stiffness and low load-bearing properties due to the intrinsic limitations of soft materials. Stiffness modulation is an effective means to improve the performance of soft actuators. However, most stiffness-tunable mechanisms are nonstretchable, and have difficulty in independently adjusting the tensile stiffness of soft elongation actuators. Here, a universal cross-fiber jamming mechanism with both elongation and bending stiffness-tunable capability is proposed for soft bellows actuators. It is composed of two semicircular symmetrical fiber bundles in an up-and-down crossed arrangement, and can follow the tensile state of the soft bellows actuator through the passive staggered motion of the layered fiber bundles. Furthermore, a soft gripper with wide grasping range and sufficient grasping stability is also developed by applying soft bellows actuators with cross-fiber jamming mechanisms. Experiments are conducted to show the related performance of the proposed cross-fiber jamming mechanism. The results show that it has fast antiimpact damping response, strong shaping ability and adjustable stiffness. Such efficient performance will promote the ability of grasping robots, and is expected to be used in daily life and industry.
Variable stiffness mechanisms provide an effective means to enhance the load-bearing capacity of soft fingers, but due to the lack of stretchability, their assembly position is often limited to the lower surface of soft bending actuators. Here, a Cross-Sliding jamming mechanism with tensile properties is developed to overcome this restriction. The mechanism is integrated on the upper surface of a soft actuator and can be passively stretched as the actuator bends. By changing the assembly position, the defect of rigidity contact between the conventional variable stiffness fingers and the object is solved, and the disturbance caused by the variable stiffness structure to the contact surface during the jamming process is eliminated. Furthermore, a multi-fingered gripper is assembled based on the variable stiffness soft fingers, demonstrating its effective grasping capability and stability by bending, stiffness, vibration experiments and so on. The reported study provides novel design and application insights for stiffness modulation in soft robots.
14 December 2022 in IEEE Robotics and Automation Letters
Soft elongation actuators are widely applied in soft robotic grippers, providing a promising solution to adjust the grasping range. However, there are some limitations in keeping their tensile shaping stability under high payloads. This work presents a universal variable stiffness mechanism called Cross-Fibre to reduce the deformation and improve the load-bearing capacity of soft elongation actuators. The proposed mechanism is composed of two symmetrical fibre loops in an up-and-down crossed arrangement around the soft elongation actuator. The fibre media on both sides can be stretched compliantly with the actuator, and thus achieve global variable stiffness. In addition, based on the soft elongation actuator with variable stiffness, this work also develops a novel soft gripper prototype for automatically adjusting the grasping range and enhancing grasping applications. Experiments demonstrate that the soft elongation actuator with Cross-Fibre effect has strong tensile-shaping ability, and the soft gripper can stably grasp objects weighting more than 1700 g. Such efficient performance will promote various applications in daily life and industry.
Layer jamming variable stiffness technologies have been widely explored to enhance the load-bearing capacity of soft robotic fingers. However, these technologies typically require layer-jamming units to be attached to soft actuators as additional components, complicating structural design and limiting flexible multiconfiguration actuation. To address these problems, we propose an autologous variable stiffness soft finger (AVSSF) that integrates the cross-layer jamming joints (CLJJs) as both the variable stiffness unit and the finger itself, actuated by tendons. This design ensures a simple and compact structure while offering a wide range of stiffness adjustment. Additionally, by coordinating tendon actuation with the control of the CLJJ's jammed and unjammed states, the AVSSF achieves multiple configurations, providing flexibility in operation. Experimental results demonstrates that the stiffness of the AVSSF increased by a factor of 79.5 after modulation. We develop a two-finger gripper based on this design, capable of executing four distinct grasping modes: power grasp, adaptive pinch, expansion grasp, and hook. This gripper demonstrates adaptability to various objects and environments, highlighting its potential for diverse applications. In summary, this work offers insights into the advancement of autologous variable stiffness technologies and the development of multimodal grasping capabilities.