Railway infrastructures play a pivotal role in developing the national transportation system. Recently, the strategy of the railway engineer has been significantly shifted; along with the development of new assets, they tend to pay increasing attention to the operation and management of existing railway assets. In this regard, this paper proposes a Digital Twin (DT) model to improve fatigue assessment efficiency in the operational processes of railway steel bridges (RSBs). The DT concept mainly lies in the federation and interaction of a Fatigue Analysis System (FAS), which is based on Eurocodes principles, and a model in Building Information Modeling (BIM). Along with the proposed DT concept, a prototyping system for a real bridge is initiated and curated. The FAS is validated in good-agreement results with the ambient vibration test of the bridge (about 1.6% variation between numerical and experimental values), and close values were found between numerical and experimental stresses, the latter obtained by installing strain gauges on the bridge. The BIM model provides access to the numerical values of fatigue state results in a given bridge connection detail but also automatically represents that information in a 3D environment using a color-scale-based visualization process. Furthermore, a simulation model with the main input variables being the traffic and geometric conditions of the bridge is continuously updated for timely re-evaluation of the damage state, which shows promise for the lifecycle management of the bridge.
The fatigue analysis of materials and structural details using local approaches, such as, stress-life, strain-life or energetic approaches, are important to estimate the fatigue crack initiation at notches. Various engineering structures, such as, bridges, wind towers, among others are subjected to cyclic dynamic loading which may substantially reduce the strength of these structures. Nowadays, the structures tend to be more complex and it is necessary to find computationally efficient solutions to perform their fatigue analysis, for dynamic actions corresponding to long complex loading events (e.g. diversity of trains crossing a bridge). Thus, this paper aims at presenting a generalization of a methodology based on modal superposition technique for local fatigue damage parameters evaluation, which could be applied in fatigue analysis using local approaches. This technique was applied recently in the context of fracture mechanics based fatigue crack propagation. But the modal superposition technique can be extended to compute the history of local notch stresses and deformations at notches. In addition, the technique can be explored for the case of local confined plasticity at notches where global elastic behavior of the component still prevails. Local submodeling can be explored with this technique to avoid the necessity of large computational models. Local models are only required to be run only for the selected modal shapes of the structure, the local time history of fatigue damage variable being reconstructed by modal superposition for each loading event