The work on cellulose fiber composites is typically strictly divided into two separated research fields depending on the fiber origin, that is, from wood and from annual plants, representing the two different industries of forest and agriculture, respectively. The present paper evaluates in parallel wood fibers and plant fibers to highlight their similarities and differences regarding their use as reinforcement in composites and to enable mutual transfer of knowledge and technology between the two research fields. The paper gives an introduction to the morphology, chemistry, and ultrastructure of the fibers, the modeling of the mechanical properties of the fibers, the fiber preforms available for manufacturing of composites, the typical mechanical properties of the composites, the modeling of the mechanical properties with focus on composites having a random fiber orientation and a non-negligible porosity content, and finally, the moisture sensitivity of the composites. The performance of wood and plant fiber composites is compared to the synthetic glass and carbon fibers conventionally used for composites, and advantages and disadvantages of the different fibers are discussed.

Wood pulp fibers can serve as useful reinforcement of plastics for increased stiffness. To assess the potential of various wood fibers as reinforcement, a method has been developed to determine the contribution of the fibers to the elastic properties of the composite. A micromechanical composite model and classical laminate mechanics are used to relate the elastic properties of the fibers to the elastic properties of the composite. A large variety of composites made of various wood pulp fibers in an epoxy vinyl ester matrix was manufactured. From the tensile test results of the composites, the contributing Young’s moduli of the fibers in the longitudinal direction are back-calculated and summarized. One finding is that there is an optimum in fiber stiffness as a function of lignin content. It is also found that industrially pulped hardwood fibers have higher stiffness than the corresponding softwood fibers. One example is kraft-cooked Norway spruce fiber, for which a Young’s modulus of 40 GPa is found. The effects of hornification, prehydrolysis, and sulfite processing are also investigated. The results indicate that mild defibration process should be used, that does not damage the cell wall structure so that the inherent high stiffness of the native fibers can be retained. It can be concluded that the proposed method works well to rank the wood fiber candidates in terms of their contribution to the composite stiffness.

The effect of voids on quasi-isotropic carbon-fibre reinforced plastic laminates under quasi-static loading is compared with that under cyclic tension loading. Emphasis is placed on following damage development at the non-crimp fabric ply-level by investigating the influence of voids on damage accumulation, most notably transverse cracking and delamination. Details from experiments include micrographs of voids taken in both scanning-electron and light microscopy, measurements of void content and crack density using light microscopy, and stiffness plots from both quasi-static and cyclic tests. The stiffness results are compared with theoretical predictions accounting for transverse cracks. Voids have a significantly more detrimental effect on the mechanical properties in cyclic loading compared with quasi-static loading. Specifically, the stiffness reduction development, the underlying transverse cracking in layers and the number of cycles to failure are affected. Quality control by only quasi-static testing for void-containing composite materials to be used in components subjected to fatigue cannot therefore be recommended.