Letizia Fumagalli

Dr. Letizia Fumagalli

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 June 2018 in Geosciences
Verified
Journal Article
Open access
PDF file
GSGennaro Alberto Stefania
Gennaro Alberto Stefania
Marco RotirotiMarco Rotiroti
Marco Rotiroti
LFLetizia Fumagalli
Letizia Fumagalli
Chiara ZanottiChiara Zanotti
Chiara Zanotti
TBTullia Bonomi
Tullia Bonomi
This work presents the numerical modeling of remediation scenarios aimed at containing and attenuating the groundwater pollution by Cr(VI) sourced from a steelworks area that affects the Alpine aquifer system in the Aosta Plain (N Italy). Here, groundwater is used for drinking water supply and food and beverage production, so the adoption of remediation works is urgently needed. More specifically, three remediation scenarios were modeled using MODFLOW-2000 and MT3DMS: (a) the activation of a hydraulic barrier to contain the pollution within the source area (Scenario 1); (b) the removal of the pollution sources and the natural attenuation of the residual groundwater plume (Scenario 2); and (c) a combination of the previous two works (Scenario 3). Model results for Scenario 1 showed that a hydraulic barrier composed of five wells located along the eastern border of the steelworks area would contain Cr(VI) concentrations above 5 µg/L (i.e., the Italian regulatory limit) within the steelworks area; the barrier would have a total discharge of 27,500 m3/day, which could be compensated by the deactivation of three steelworks wells; the hydraulic barrier would drop the Cr(VI) concentrations below 5 µg/L in the areas downstream of the steelworks after ~3 years from its start of operation. Results for Scenario 2 highlighted that the removal of the Cr(VI) sources would drop the Cr(VI) concentrations below 5 µg/L in the areas downstream of the steelworks after ~2.5 years, and lead to a full remediation of the Cr(VI) groundwater plume (i.e., total Cr(VI) mass in the aquifer close to zero) after 17 years. Results for Scenario 3 showed that the removal of the Cr(VI) sources accompanied by the activation of the hydraulic barrier would led to a faster remediation within the first 14 years from the starting of the remediation works, with concentrations below 5 µg/L in the areas downstream of the steelworks obtained after ~2.3 years.

30 December 2022 in Water
Verified
Journal Article
Open access
PDF file
Chiara ZanottiChiara Zanotti
Chiara Zanotti
Marco RotirotiMarco Rotiroti
Marco Rotiroti
ARAgnese Redaelli
Agnese Redaelli
MCMariachiara Caschetto
Mariachiara Caschetto
LFLetizia Fumagalli
Letizia Fumagalli
TBTullia Bonomi
Tullia Bonomi
As groundwater quality monitoring networks have been expanded over the last decades, significant time series are now available. Therefore, a scientific effort is needed to explore innovative techniques for groundwater quality time series exploitation. In this work, time series exploratory analysis and time series cluster analysis are applied to groundwater contamination data with the aim of developing data-driven monitoring strategies. The study area is an urban area characterized by several superimposing historical contamination sources and a complex hydrogeological setting. A multivariate time series cluster analysis was performed on PCE and TCE concentrations data over a 10 years time span. The time series clustering was performed based on the Dynamic Time Warping method. The results of the clustering identified 3 clusters associated with diffuse background contamination and 7 clusters associated with local hotspots, characterized by specific time profiles. Similarly, a univariate time series cluster analysis was applied to Cr(VI) data, identifying 3 background clusters and 7 hotspots, including 4 singletons. The clustering outputs provided the basis for the implementation of data-driven monitoring strategies and early warning systems. For the clusters associated with diffuse background contaminations and those with constant trends, trigger levels were calculated with the 95° percentile, constituting future threshold values for early warnings. For the clusters with pluriannual trends, either oscillatory or monotonous, specific monitoring strategies were proposed based on trends’ directions. Results show that the spatio-temporal overview of the data variability obtained from the time series cluster analysis helped to extract relevant information from the data while neglecting measurements noise and uncertainty, supporting the implementation of a more efficient groundwater quality monitoring.

Verified
Journal Article
Open access
PDF file
DSDavide Sartirana
Davide Sartirana
Marco RotirotiMarco Rotiroti
Marco Rotiroti
Chiara ZanottiChiara Zanotti
Chiara Zanotti
TBTullia Bonomi
Tullia Bonomi
LFLetizia Fumagalli
Letizia Fumagalli
MAMattia De Amicis
Mattia De Amicis
The recent rapid increase in urbanization has led to the inclusion of underground spaces in urban planning policies. Among the main subsurface resources, a strong interaction between underground infrastructures and groundwater has emerged in many urban areas in the last few decades. Thus, listing the underground infrastructures is necessary to structure an urban conceptual model for groundwater management needs. Starting from a municipal cartography (Open Data), thus making the procedure replicable, a GIS methodology was proposed to gather all the underground infrastructures into an updatable 3D geodatabase (GDB) for the metropolitan city of Milan (Northern Italy). The underground volumes occupied by three categories of infrastructures were included in the GDB: (a) private car parks, (b) public car parks and (c) subway lines and stations. The application of the GDB allowed estimating the volumes lying below groundwater table in four periods, detected as groundwater minimums or maximums from the piezometric trend reconstructions. Due to groundwater rising or local hydrogeological conditions, the shallowest, non-waterproofed underground infrastructures were flooded in some periods considered. This was evaluated in a specific pilot area and qualitatively confirmed by local press and photographic documentation reviews. The methodology emerged as efficient for urban planning, particularly for urban conceptual models and groundwater management plans definition.

19 December 2022 in Water
Verified
Journal Article
Open access
PDF file
DSDavide Sartirana
Davide Sartirana
Chiara ZanottiChiara Zanotti
Chiara Zanotti
Marco RotirotiMarco Rotiroti
Marco Rotiroti
MAMattia De Amicis
Mattia De Amicis
MCMariachiara Caschetto
Mariachiara Caschetto
TBTullia Bonomi
Tullia Bonomi
Urbanization is a worldwide process that recently has culminated in wider use of the subsurface, determining a significant interaction between groundwater and underground infrastructures. This can result in infiltrations, corrosion, and stability issues for the subsurface elements. Numerical models are the most applied tools to manage these situations. Using MODFLOW-USG and combining the use of Wall (HFB) and DRN packages, this study aimed at simulating underground infrastructures (i.e., subway lines and public car parks) and quantifying their infiltrations. This issue has been deeply investigated to evaluate water inrush during tunnel construction, but problems also occur with regard to the operation of tunnels. The methodology has involved developing a steady-state groundwater flow model, calibrated against a maximum groundwater condition, for the western portion of Milan city (Northern Italy, Lombardy Region). Overall findings pointed out that the most impacted areas are sections of subway tunnels already identified as submerged. This spatial coherence with historical information could act both as validation of the model and a step forward, as infiltrations resulting from an interaction with the water table were quantified. The methodology allowed for the improvement of the urban conceptual model and could support the stakeholders in adopting proper measures to manage the interactions between groundwater and the underground infrastructures.

20 January 2018 in Water
Verified
Journal Article
Open access
PDF file
Marco RotirotiMarco Rotiroti
Marco Rotiroti
RJRasmus Jakobsen
Rasmus Jakobsen
LFLetizia Fumagalli
Letizia Fumagalli
TBTullia Bonomi
Tullia Bonomi
The reductive dissolution of Fe-oxide driven by organic matter oxidation is the primary mechanism accepted for As mobilization in several alluvial aquifers. These processes are often mediated by microorganisms that require a minimum Gibbs energy available to conduct the reaction in order to sustain their life functions. Implementing this threshold energy in reactive transport modeling is rarely used in the existing literature. This work presents a 1D reactive transport modeling of As mobilization by the reductive dissolution of Fe-oxide and subsequent immobilization by co-precipitation in iron sulfides considering a threshold energy for the following terminal electron accepting processes: (a) Fe-oxide reduction, (b) sulfate reduction, and (c) methanogenesis. The model is then extended by implementing a threshold energy on both reaction directions for the redox reaction pairs Fe(III) reduction/Fe(II) oxidation and methanogenesis/methane oxidation. The optimal threshold energy fitted in 4.50, 3.76, and 1.60 kJ/mol e− for sulfate reduction, Fe(III) reduction/Fe(II) oxidation, and methanogenesis/methane oxidation, respectively. The use of models implementing bidirectional threshold energy is needed when a redox reaction pair can be transported between domains with different redox potentials. This may often occur in 2D or 3D simulations.

1 January 2019 in Arctic, Antarctic, and Alpine Research
Verified
Journal Article
Open access
Giovanni LeonelliGiovanni Leonelli
Giovanni Leonelli
Giovanna BattipagliaGiovanna Battipaglia
Giovanna Battipaglia
PCPaolo Cherubini
Paolo Cherubini
MSMatthias Saurer
Matthias Saurer
RSRolf Siegwolf
Rolf Siegwolf
Valter  MaggiValter Maggi
Valter Maggi
The tree-ring stable carbon and oxygen isotope chronologies from two forest sites located in the Forni Glacier forefield (Italy)—one along the glacier stream (GL) and the other toward the valley slope (SL)—were analyzed with the aim of disentangling the precipitation and glacier meltwater inputs in source water δ18O, as reflected by the tree-ring cellulose δ18O. The cellulose δ18O from the GL trees has a negative correlation with winter and summer temperatures, whereas the cellulose δ18O from the SL trees has a positive correlation with precipitation δ18O. The isotopic signature of the source water at the GL site is also influenced by waters of glacial origin, as confirmed by the 18O-depleted glacier meltwater inputs (GMWI_δ18O) estimated by means of an isotope model. The GMWI_δ18O values are consistent with the mean difference measured between the δ18O in the glacier stream and in the precipitation and the winter and summer temperature explains up to 37 percent of the GMWI_δ18O variance. Our results show an increasing influence of glacier meltwater throughout the past decade for the GL site. Our analysis opens new opportunities to reconstruct changes in water regimes of the glacier streams by means of the tree-ring cellulose δ18O.