Lubin Liu

Prof. Dr. Lubin Liu


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2022 in Macromolecular Materials and Engineering
Verified
Journal Article
Open access
SJSiyu Jiang
Siyu Jiang
LLLubin Liu
Lubin Liu
XYXuhui Yang
Xuhui Yang
BLBin Li
Bin Li
MXMiaojun Xu
Miaojun Xu
Intumescent flame retardants (IFR) are widely used in the field of flame retardant polypropylene (PP), but their flame retardant efficiency and smoke suppression properties need to be further improved. Herein, a Ni‐Al LDH (layered double hydroxide) is obtained successfully by coprecipitation and microwave hydrothermal technique and used as a synergist to improve the flame‐retardant and smoke‐suppression properties of triazine‐based IFR. The results showed that IFR/Ni‐Al LDH exhibited the best synergistic effect when the IFR is replaced by 5 wt% Ni‐Al LDH. 17 wt% IFR/Ni‐Al LDH enabled the PP composites to achieve UL‐94 V‐0 rating with a high LOI of 29.8%. Besides, the introduction of Ni‐Al LDH effectively decreased the heat and smoke release of the PP/IFR composites due to its catalytic charring effect. This is mainly attributed that the introduction of metal ions in Ni‐Al LDH effectively improved the strength and crosslinking degree of char layer and promoted the formation of a cohesive and dense char layer. The formed high‐quality char layer effectively exerted the barrier effect in condensed phase. Therefore, the PP/IFR/Ni‐Al LDH composites exhibited excellent flame‐retardant and smoke‐suppression performance. This investigation provided a facile way to prepare environment‐friendly and high‐performance flame retardant PP composites with wide application prospects.

4 August 2021 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
YXYue Xu
Yue Xu
LLLubin Liu
Lubin Liu
CYChentao Yan
Chentao Yan
YHYukai Hong
Yukai Hong
MXMiaojun Xu
Miaojun Xu
BLBin Li
Bin Li

7 December 2023 in Sustainable Materials and Technologies
Verified
Journal Article
Closed access
CDChunlin Du
Chunlin Du
YXYue Xu
Yue Xu
CYChentao Yan
Chentao Yan
WZWenjia Zhang
Wenjia Zhang
HHHaojie Hu
Haojie Hu
LLLubin Liu
Lubin Liu

27 April 2026 in Advanced Functional Materials
Verified
Journal Article
Open access
KXKai Xu
Kai Xu
QLQihang Lv
Qihang Lv
LLLubin Liu
Lubin Liu
ZZZhezhe Zhou
Zhezhe Zhou
CYChentao Yan
Chentao Yan
PSPinan Song
Pinan Song
Biobased aerogels show great potential to replace traditional petrochemical‐based thermal insulation materials due to their sustainability and comparable physical properties. Unfortunately, their insufficient compressive strength (often < 0.5 MPa) and high flammability limit their practical applications. To bridge this gap, we here report a bottom‐up biomimetic mineralization strategy to prepare biobased aerogel (SiB@CC) by impregnating chitin/chitosan aerogels with sodium silicate and borax, followed by freeze‐drying and thermal cross‐linking. The SiB@CC aerogels exhibit high compressive strength (up to 2.25 MPa) and exceptional energy absorption. The aerogel can withstand 81 000 times of its own weight without failure, and its energy absorption efficiency is superior to that of most polymers, metals, and ceramics. Benefiting from the ability to form a robust organic‐inorganic char layer, the SiB@CC aerogels exhibit excellent fire resistance and cannot be ignited, with a limiting oxygen index value exceeding 90%. Moreover, the aerogel shows exceptionally high‐temperature thermal insulation, as evidenced by a backside temperature of only 130 ° C after 600 s continuous exposure to ∼1300 ° C flame. This work offers a promising biomimetic approach for preparing bio‐based aerogels combining high‐strength, fire‐resistant, and super thermal insulation, which is expected to find great potential for sustainable high‐temperature thermal insulation.

21 November 2021 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
LTLili Tao
Lili Tao
YXYue Xu
Yue Xu
LLLubin Liu
Lubin Liu
BLBin Li
Bin Li
MXMiaojun Xu
Miaojun Xu

11 November 2026 in Safety Science and Technology
Verified
Journal Article
Open access
YGYong Guo
Yong Guo
LXLong Xiang
Long Xiang
NSNannan Song
Nannan Song
SHSiqi Huo
Siqi Huo
TCTingting Chen
Tingting Chen
HWHao Wang
Hao Wang
Fire development is inherently stage‐dependent, with material responses and engineering concerns varying across fire scenarios and exposure conditions. Established fire safety engineering (FSE) and performance‐based design (PBD) approaches already connect fire development, test evidence, and mitigation strategies with defined safety objectives. Building on this foundation, this review examines the relationships among material fire behavior, testing methods, and application‐specific safety requirements across buildings, transportation, industrial processes, and energy storage systems. A stage‐dependent organization is used to examine how material properties and test results inform ignition control, fire growth suppression, smoke management, and structural stability. The discussion distinguishes burning‐behavior classifications, ignition parameters, heat and smoke release measurements, and fire‐resistance assessments based on their purposes and applicable conditions. Particular attention is given to how exposure, ventilation, geometry, scale, and system interactions influence the transfer of laboratory findings to engineering applications. The discussion also considers when additional component‐level or system‐level evidence is needed to assess safety outcomes. By considering these relationships across application sectors, this review aims to support the interpretation of materials research within established FSE and PBD practice, while clarifying the applicability and limitations of material‐level evidence in scenario‐specific fire safety assessments.