Vertical deformation and axial strain are crucial indicators for evaluating pipeline performance. Accurate prediction of these indicators provides essential support for early warning and proactive maintenance. To achieve this, a multi-sensor monitoring system was constructed by combining an embedded static leveling instrument with a long-gauge fiber-optic grating sensor system to sequentially monitor vertical deformation and axial strain. A novel multi-task prediction model, HO-CNN-BiGRU-AM-HMTL, was proposed to capture the spatiotemporal correlations between deformation and strain. The sensitivity of the model’s hyperparameters was examined, and the effects of dataset size (DS) and prediction horizon on model performance were analyzed. The model’s performance was evaluated by comparing it with existing single-task learning (STL) and multi-task learning (MTL) models in terms of prediction accuracy and computational efficiency. The results indicated that hyperparameter tuning of the hippopotamus optimization module enhanced the model’s performance. The DS showed an initial improvement followed by a decline in performance, while the prediction horizon demonstrated a gradual decrease, then a sharp drop. Maintaining the DS between 4 and 5 months and the prediction horizon within 7 days is recommended. The HO-CNN-BiGRU-AM-HMTL model outperformed existing STL and MTL models in prediction accuracy, reducing computation time by 70.13%–88.48% compared to STL and improving it by 4.05%–40.54% over MTL. Although there was some computational overhead, the overall runtime of the model remained under 16 s, meeting the requirements for engineering applications. This study integrates pipeline engineering with deep learning techniques to enable advanced prediction of deformation and strain, providing crucial support for risk warning and proactive maintenance.
Hammer testing, a nondestructive testing method, has been demonstrated to provide information on structural damage. One of the biggest challenges with this testing method is the simultaneous identification of surface, internal, and composite damage (consisting of both surface and internal damage) in a complex environment, such as post-disaster. A method of identification based on variable-frequency hammering is proposed to solve this problem. The importance and feasibility of using variable-frequency impact hammers and the generated acoustic data to identify multiple types of damage in concrete structures are presented. First, a type of variable-frequency hammering acoustic feature was generated using acoustic feature extraction and selection based on the acoustic data obtained from variable-frequency hammering. Second, a damage recognition model was established using a support vector machine to identify four types of damage occurring simultaneously in the same concrete member specimens, including a type of composite damage with two types of damage occurring simultaneously within 20 mm. Finally, the feasibility of this variable-frequency hammering method was verified experimentally. This method exhibited good performance, with an accuracy of 97.8%; moreover, the method ensures that the feature dimensionality remains unchanged while increasing the effective information of the data.
16 November 2023 in International Journal of Structural Stability and Dynamics