The multi-layer composite development primarily aims to develop and test the components of the next generation of hadron colliders (e.g., Large Hadron Collider - LHC) consisting of superconducting raw materials. Multilayer sheet is very similar to the commonly used NbTi wire products, a 2D version of the commercial wire. These composites consist of layers such as NbTi superconductor, Nb diffusion barrier (between NbTi and Cu) and Cu stabilizer. In β-NbTi superconducting alloys, α-Ti precipitates are primary flux pinning centers that maintain stable superconductivity. A multi-step series of heat treatments and cold-forming processes can develop the flux pinning centers. Practically, this process means three heat treatments of constant period and temperature and drawing or rolling between the heat treatments.
1 February 2014 in International Journal of Cardiology
In this study the effects of small amounts of nickel addition (0-2000 ppm) on the microstructure, on Cu6Sn5 intermetallic compound formation and the mechanical properties of a Sn-0.5Cu lead-free solder were investigated. It is known that even ppm level additions of Ni have significant effects on the microstructure of Sn-Cu solder alloys. Ni suppresses the growth of β-Sn dendrites in favour of eutectic formation. As the nickel content increases, the microstructure undergoes a morphology evolution from hypoeutectic through fully eutectic to hypereutectic. Furthermore, the presence of Ni in the Cu6Sn5 intermetallic compound phase stabilises its high-temperature allotrope η-Cu6Sn5.