A generic nano‐power voltage and current reference topology, which takes advantage of the unequal threshold voltage ( ) of two MOSFETs in subthreshold region, is developed to provide reliable bias and reference signals for the analogue integrated blocks used in the Internet‐of‐Things applications. The new architecture is a self‐powered four‐transistor topology with a single temperature‐insensitive resistor, generating both temperature‐independent voltage and current without any operational amplifier or bias network. Instead, the resistor defines the absolute value of the current reference ( ) which supplies the core devices. The circuit is designed and simulated for a target current reference of 7.50 nA in 0.18 µm CMOS process, and achieves a worst‐case temperature coefficient (TC) of 59.47 ppm/°C over a temperature range from −40 to 125°C and 1.8 V voltage supply. The average voltage reference ( ) is 346 mV, and the worst‐case TC of different corners is 21.98 ppm/°C. The nominal current consumption is twice the (15 nA) regardless of the supply and temperature, and can be scaled down by reducing the desired current reference.
12 June 2011 in International Journal of Circuit Theory and Applications
The conventional approach to implementing analogue integrated circuits in nano‐scale complementary metal oxide semiconductor (CMOS) technologies relies basically on circuit simulations using the SPICE models provided by the foundries. Depending on the circuit complexity, the designer should, however, spend a significant amount of time sizing the metal oxide semiconductor field effect transistors such that maximum efficiency is achieved for minimum power consumption and silicon area. Analytical‐based design procedures can assist the designer in confronting the sizing challenge of the metal oxide semiconductor (MOS) devices. The procedures are, however, dependent on circuit topology, model parameters, and device physics. This study aims at presenting a systematic approach for analysis and design of analogue circuits in scaled CMOS. For this purpose, the behaviour of short‐channel MOS devices is characterised in various process and temperature corners using an updated matrix representation of different device scales, bias conditions, and small‐signal parameters. The details to effectively extract the matrix derivation of the technology model files are presented, enabling to devise generalised functions for the design and analysis of the circuits. The design examples include a 0.39 V – 28 µA reference circuit, and a 7.50 µA/V operational‐transconductance amplifier with 1.0 V voltage supply in 90‐nm CMOS.
This paper presents an ultra-low-power voice activity detection (VAD) system to discriminate speech from non-speech parts of audio signals. The proposed VAD system uses level-crossing sampling for voice activity detection. The useless samples in the non-speech parts of the signal are eliminated due to the activity-dependent nature of this sampling scheme. A 40 ms moving window with a 30 ms overlap is exploited as a feature extraction block, within which the output samples of the level-crossing analog-to-digital converter (LC-ADC) are counted as the feature. The only variable used to distinguish speech and non-speech segments in the audio input signal is the number of LC-ADC output samples within a time window. The proposed system achieves an average of 91.02% speech hit rate and 82.64% non-speech hit rate over 12 noise types at −5, 0, 5, and 10 dB signal-to-noise ratios (SNR) over the TIMIT database. The proposed system including LC-ADC, feature extraction, and classification circuits was designed in 0.18 µm CMOS technology. Post-layout simulation results show a power consumption of 394.6 nW with a silicon area of 0.044 mm2, which makes it suitable as an always-on device in an automatic speech recognition system.