Purpose: The purpose of this paper is to present a semi-analytical solution for time-dependent natural convection flow with heat generation/absorption in an annulus partially filled with porous material. Design/methodology/approach: The governing partial differential equations are transformed into the ordinary differential equations using the Laplace transform technique. The exact solution obtained is inverted from the Laplace domain to time domain using the Riemann-sum approximation approach. Justification of the Riemann-sum approximation approach is achieved by comparing the values obtained with those of the implicit finite difference method at both the transient state and the steady state at large time. Findings: If is found that the peak axial velocity always occur in the clear fluid region. In addition, there is an indication that heat generating fluid is desirable for optimum mass flux in the annular gap most importantly when the convection current is enhanced by constant heat flux. Originality/value: In view of the amount of works done on natural convection with internal heat generation/absorption, it becomes interesting to investigate the influence of this essential activity on natural convection flow in a vertical cylinder partially filled with porous material where the outer surface of the inner cylinder is either heated isothermally or with constant heat flux.
25 November 2017 in International Journal of Fluid Mechanics & Thermal Sciences
This paper presents an exact solution of a fully developed natural convection flow in a vertical concentric annulus in the presence of transverse magnetic field and heat absorption. The non-dimensional form of the equation governing the flow is first obtained and then the unified analytical solutions for the temperature field, velocity field, and skin-frictions as well as rate of heat transfer are obtained for both isothermal and constant heat flux case on the outer surface of the inner cylinder. The effect of various identified governing parameters on the flow was illustrated with the aid of line graphs. It is found that the magnitude of maximum fluid velocity is greater in the case of isothermal heating compared with the constant heat flux case when the gap between the cylinders is less or equal to radius of the inner cylinder. More also, the various values of the non-dimensional heat absorption parameter (H) and the corresponding values of annular gap where these fields are almost the same are presented in table 1.
The present work is concerned with an analytical study of entropy generation in viscous, incompressible fluid in an inclined channel with porous walls. The solution of the governing equations were obtained in closed form. The expression for the irreversibility ratio was also obtained and the results were presented graphically and extensively discussed for different values of the dimensionless parameters. The result indicates that wall inclination enhance entropy generation.