The application of lignin-based adsorbents in the efficient removal of phosphate from wastewater has attracted much attention and been intensively studied in recent years. However, most currently reported lignin-based adsorbents are difficult to recover and recycle. Herein, we have developed a recyclable, nanostructured bio-adsorbent, poly(ethyleneimine) (PEI)-modified lignin (LG) integrated with Fe₃O₄ and Zr-La dual-metal hydroxide (LG-NH₂@Fe₃O₄@Zr-La), by the Mannich reaction followed by the chemical coprecipitation method. Multilayer adsorption existed on the surface of LG-NH₂@Fe₃O₄@Zr-La based on the isotherm fitting curve, and its adsorption capacity reached 57.8 mg P g⁻¹, exhibiting a higher phosphate uptake than most reported metallic oxide-based composites. The adsorption process was dominated by inner-sphere complexation of ligand-exchange and electrostatic interactions. Moreover, LG-NH₂@Fe₃O₄@Zr-La exhibited excellent selectivity against coexisting anions, and the adsorption was more efficient under acidic conditions. When the phosphate concentration was 2.0 mg P L⁻¹, the removal efficiency of phosphate reached 99.5% and the residual concentration was only 10 μg P L⁻¹, which meets the United States Environmental Protection Agency (USEPA) standard for eutrophication prevention. In addition, the LG-NH₂@Fe₃O₄@Zr-La displayed excellent reusability, maintaining 91.8% of removal efficiency after five cycles. Importantly, owing to the magnetic properties of the loaded Fe₃O₄, the resulting composite could be separated within 30 s under an external magnetic field. Thus, the separable and recyclable biobased magnetic adsorbent developed in this work exhibited promising application in phosphate capture from real sewage. This research study provides a new perspective for lignin valorization in lignocellulose biorefineries and establishes an approach for developing an economical and efficient bio-adsorbent for phosphate removal from wastewater.

The efficient biosynthesis of chiral amines at an industrial scale to meet the high demand from industries that require chiral amines as precursors is challenging due to the poor stability and low catalytic efficiency of ω-transaminases (ω-TAs). Herein, this study adopted a green and efficient solvent engineering method to explore the effects of various aqueous solutions of deep eutectic solvents (DESs) as cosolvents on the catalytic efficiency and stability of ω-TA. Binary- and ternary-based DESs were used as cosolvents in enhancing the catalytic activity and stability of a ω-TA variant from Aspergillus terreus (E133A). The enzyme exhibited a higher catalytic activity in a ternary-based DES that was 2.4-fold higher than in conventional buffer. Moreover, the thermal stability was enhanced by a magnitude of 2.7, with an improvement in storage stability. Molecular docking studies illustrated that the most potent DES established strong hydrogen bond interactions with the enzyme’s amino acid, which enhanced the catalytic efficiency and improved the stability of the ω-TA. Molecular docking is essential in designing DESs for a specific enzyme.

The dependence of conventional epoxy resins on fossil fuels and the environmental and health hazards associated with bisphenol A (BPA) demand the creation of sustainable alternatives. Because lignin is a natural resource and has an aromatic ring skeleton structure, it could be used as an alternative to fossil fuels. This study effectively resolved this challenge by utilizing a sustainable one-step epoxidation process to transform lignin into a bio-based epoxy resin. The results verified the successful synthesis of epoxidized bamboo lignin through systematic characterization employing Fourier transform infrared spectroscopy, hydrogen spectroscopy/two-dimensional heteronuclear single-quantum coherent nuclear magnetic resonance, quantitative phosphorus spectroscopy, and gel permeation chromatography. Lignin-based epoxy resins had an epoxy equivalent value of 350–400 g/mol and a weight-average molecular weight of 4853 g/mol. Studies on the curing kinetics revealed that polyetheramine (PEA-230) demonstrated the lowest apparent activation energy (46.2 kJ/mol), signifying its enhanced curing efficiency and potential for energy conservation. Mechanical testing indicated that the PEA-230 cured network demonstrated the maximum tensile strength (>25 MPa), whereas high-molecular-weight polyetheramine (PEA-2000) imparted enhanced elongation to the material. Lignin-based epoxy resins demonstrated superior heat stability. This study demonstrates the conversion of bamboo lignin into bio-based epoxy resins using a simple, environmentally friendly synthesis process, demonstrating the potential to reduce fossil resource use, efficiently use waste, develop sustainable thermosetting materials, and promote a circular bioeconomy.

The enzyme ω-transaminase (ω-TA) has garnered significant attention due to its capacity to catalyze the synthesis of chiral amines with high efficiency. Nevertheless, the lack of stability of ω-TA and the difficulty of recycling and reuse are still challenges that limit its application. This study developed a novel magnetic nanocellulose composite carrier (NNC@Fe₃O₄@Ni), synthesized from microcrystalline cellulose via low-eutectic solvent treatment, amine modification, and metal hybridization. The NNC@Fe₃O₄@Ni was characterized by FTIR, XPS, XRD, BET, and VSM. Additionally, the performance and catalytic behavior of the immobilized enzyme were investigated. The results revealed that NNC@Fe₃O₄@Ni exhibited a high specific surface area, superparamagnetism, and dual-site functionality (amine/Ni²⁺). Response Surface Methodology (RSM) optimized the carrier-enzyme interaction parameters, yielding optimal immobilization conditions: a mass ratio of 50.8 mg g⁻¹, temperature of 12.5 °C, and duration of 58.6 min, achieving 82.91% enzyme activity recovery. Compared to free enzymes, the immobilized variant demonstrated enhanced catalytic stability, with expanded optimal pH (9.0) and temperature (30 °C). Thermal stability assessments showed 84.39% activity retention after 5 h at 30 °C and 90.30% residual activity post-120 h storage. The catalyst maintained >80% efficiency over 10 reuse cycles. These findings confirm the efficacy of magnetic nanocellulose carriers in enhancing ω-TA stability, reusability, and catalytic performance, offering a viable strategy for industrial biocatalytic processes.

Lanthanide rare earth elements possess significant promise for material applications owing to their distinctive optical and magnetic characteristics, as well as their versatile coordination capabilities. This study introduced a lanthanide-functionalized magnetic nanocellulose composite (NNC@Fe₃O₄@La(OH)₃) for effective phosphorus/nitrogen (P/N) ligand separation. The hybrid material employs the adaptable coordination geometry and strong affinity for oxygen of La³⁺ ions to show enhanced DNA-binding capacity via multi-site coordination with phosphate backbones and bases. This study utilized cellulose as a carrier, which was modified through carboxylation and amination processes employing deep eutectic solvents (DES) and polyethyleneimine. Magnetic nanoparticles and La(OH)₃ were subsequently incorporated into the cellulose via in situ growth. NNC@Fe₃O₄@La(OH)₃ showed a specific surface area of 36.2 m²·g⁻¹ and a magnetic saturation intensity of 37 emu/g, facilitating the formation of ligands with accessible La³⁺ active sites, hence creating mesoporous interfaces that allow for fast separation. NNC@Fe₃O₄@La(OH)₃ showed a significant affinity for DNA, with adsorption capacities reaching 243 mg/g, mostly due to the multistage coordination binding of La³⁺ to the phosphate groups and bases of DNA. Simultaneously, kinetic experiments indicated that the binding process adhered to a pseudo-secondary kinetic model, predominantly dependent on chemisorption. This study developed a unique rare-earth coordination-driven functional hybrid material, which is highly significant for constructing selective separation platforms for P/N-containing ligands.