Self-governing small regions of power systems, known as “microgrids”, are enabling the integration of small-scale renewable energy sources (RESs) while improving the reliability and energy efficiency of the electricity network. Microgrids can be primarily classified into three types based on their voltage characteristics and system architecture; 1) AC microgrids, 2) DC microgrids, and 3) Hybrid AC/DC microgrids. This paper presents a comprehensive review of stability, control, power management and fault ride-through (FRT) strategies for the AC, DC, and hybrid AC/DC microgrids. This paper also classifies microgrids in terms of their intended application and summarises the operation requirements stipulated in standards (e.g., IEEE Std. 1547-2018). The control strategies for each microgrid architecture are reviewed in terms of their operating principle and performance. In terms of the hybrid AC/DC microgrids, specific control aspects, such as mode transition and coordinated control between multiple interlinking converters (ILCs) and energy storage system (ESS) are analysed. A case study is also presented on the dynamic performance of a hybrid AC/DC microgrid under different control strategies and dynamic loads. Hybrid AC/DC microgrids shown to have more advantages in terms of economy and efficiency compared with the other microgrid architectures. This review shows that hierarchical control schemes, such as primary, secondary, and tertiary control are very popular among all three microgrid types. It is shown that the hybrid AC/DC microgrids require more complex control strategies for power management and control compared to AC or DC microgrids due to their dependency on the ILC controls and the operation mode of the hybrid AC/DC microgrid. Case study illustrated the significant effects of microgrid feeder characteristics on the dynamic performance of the hybrid AC/DC microgrid. It is also revealed that any transient conditions either in the AC or DC microgrids could propagate through the ILC affecting the entire microgrid dynamic performance. Additionally, the critical control issues and the future research challenges of microgrids are also discussed in this paper.

A photovoltaic (PV) system's output power fluctuates according to the weather conditions. Fluctuating PV power causes frequency deviations in the power utilities when the penetration is large. Usually, an energy storage system (ESS) is used to smooth the PV output power fluctuations and then the smoothed power is supplied to the utility. In this paper, a simple fuzzy-based frequency-control method is proposed for the PV generator in a PV-diesel hybrid system without the smoothing of PV output power fluctuations. By means of the proposed method, output power control of a PV generator considering the conditions of power utilities and the maximizing of energy capture are achieved. Here, fuzzy control is used to generate the PV output power command. This fuzzy control has average insolation, change of insolation, and frequency deviation as inputs. The proposed method is compared with a maximum power point tracking control-based method and with an ESS-based conventional control method. The numerical simulation results show that the proposed method is effective in providing frequency control and also delivers power near the maximum PV power level.

Power electronic converter (PEC)-interfaced renewable energy generators (REGs) are increasingly being integrated to the power grid. With the high renewable power penetration levels, one of the key power system parameters, namely reactive power, is affected, provoking steady-state voltage and dynamic/transient stability issues. Therefore, it is imperative to maintain and manage adequate reactive power reserve to ensure a stable and reliable power grid. This paper presents a comprehensive literature review on the reactive power management in renewable rich power grids. Reactive power requirements stipulated in different grid codes for REGs are summarized to assess their adequacy for future network requirements. The PEC-interfaced REGs are discussed with a special emphasis on their reactive power compensation capability and control schemes. Along with REGs, conventional reactive power support devices (e.g., capacitor banks) and PEC-interfaced reactive power support devices (e.g., static synchronous compensators) play an indispensable role in the reactive power management of renewable rich power grids, and thus their reactive power control capabilities and limitations are thoroughly reviewed in this paper. Then, various reactive power control strategies are reviewed with a special emphasis on their advantages/disadvantages. Reactive power coordination between support devices and their optimal capacity are vital for an efficient and stable management of the power grid. Accordingly, the prominent reactive power coordination and optimization algorithms are critically examined and discussed in this paper. Finally, the key issues pertinent to the reactive power management in renewable rich power grids are enlisted with some important technical recommendations for the power industry, policymakers, and academic researchers.

This paper presents a fuzzy based frequency control strategy by the Megawatt (MW) class distributed PV systems and electric vehicles (EVs). The frequency control is proposed from the view point of the frequency fluctuation problem produced by the large penetration of PV power and sudden load variation. The fuzzy based frequency control has three inputs: average insolation, change of insolation and frequency deviation. Following these three inputs, a frequency control system for the distributed PV inverters is proposed. For the case of different insolations in the different areas of the power system, a coordinated control method of the distributed PV inverters, energy storage systems (ESSs) and EVs is presented. The proposed method is simulated by considering dual power and information flows between supply and demand sides in a large power system and is found satisfactory to provide frequency control and to reduce tie-line power fluctuations.

A photovoltaic (PV) system's power output is not constant and fluctuates depending on weather conditions. Fluctuating power causes frequency deviations and reduction in reliability of the isolated power utility or microgrid when large output power from several PV systems is penetrated in the utility. In this paper, to overcome these problems, a simple coordinated control method for leveling the fluctuations of combined power output from multiple PV systems is proposed. The conflicting objective of output power leveling and acquisition power increase is achieved by means of the proposed method. Here, output power command is generated in two steps: central and local. Fuzzy reasoning is used to generate the central leveling output power command considering insolation, variance of insolation, and absolute average of frequency deviation. In local step, a simple coordination is maintained between central power command and local power commands by producing a common tuning factor. Power converters are used to achieve the same output power as local command power employing PI control law for each of the PV generation systems. The proposed method is compared with the method where a modified maximum power point tracking control is used for smoothing the short-term change in each of the PV system's output. Simulation results show that the proposed method is effective for leveling output power fluctuations and feasible to reduce the frequency deviations of the isolated power utility to maintain reliability.