Chieko Kuji

Dr. Chieko Kuji

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

17 June 2022 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
CKChieko Kuji
Chieko Kuji
MMMasayoshi Mizutani
Masayoshi Mizutani
KSKeita Shimada
Keita Shimada
KSKen Suzuki
Ken Suzuki
HMHideo Miura
Hideo Miura
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa

16 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
CKChieko Kuji
Chieko Kuji
Hitoshi SoyamaHitoshi Soyama
Hitoshi Soyama
Additive manufactured (AM) metals are attractive materials for medical implants, as their geometries are directly produced from computer-aided design (CAD)/computer-aided manufacturing (CAM) data. However, the fatigue properties of AM metals are weak compared with bulk metals, which is an obstacle to the practical applications of AM metals. To improve the fatigue properties of AM metals, we developed a mechanical surface treatment using laser cavitation. When we irradiate a pulsed laser to a metallic surface in water, laser ablation is generated, and a bubble that behaves like a cavitation is produced. The bubble is referred to as a “laser cavitation”. In the surface treatment using laser cavitation, we use the plastic deformation caused by the impact force at the bubble collapse and pulsed laser energy that produces local melting at the same time. Thus, the mechanical surface treatment using laser cavitation is a type of surface mechanical alloying. In this study, to demonstrate the improvement in the fatigue properties of AM metals, we treated titanium alloy Ti6Al4V, which was manufactured by direct metal laser sintering (DMLS), with laser cavitation, and we evaluated the surface morphology, roughness, residual stress, hardness, and finally tested it using a torsion fatigue test. Unmelted particles on the DMLS surface, which cause fatigue cracks, were melted and resolidified using laser cavitation, resulting in a reduction of the maximum heights of roughness (Rz) of about 75% and the arithmetical mean roughness (Ra) of about 84% of the non-peened one. Although tensile residual stresses of about 80–180 MPa were generated on the as-built surface, compressive residual stresses of about −80 MPa were introduced by laser cavitation. Furthermore, laser cavitation formed Ti4O5 oxide film, which increased the surface hardness by about 106%. Finally, we performed torsional fatigue tests and revealed that laser cavitation extended the fatigue life from 19,791 cycles to 36,288 cycles at an applied shear stress (τa) at 460 MPa, which is effective in suppressing crack initiation.

14 July 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
CKChieko Kuji
Chieko Kuji
CCChristopher R. Chighizola
Christopher R. Chighizola
MHMichael R. Hill
Michael R. Hill
JAJan C. Aurich
Jan C. Aurich
Hitoshi SoyamaHitoshi Soyama
Hitoshi Soyama
Aluminum alloys used in monolithic parts for aerospace applications are subjected to distortion and residual stress (RS) generated by milling, affecting the product fatigue life. Particularly, the change in RS with depth (z) has a characteristic distribution with a maximum compressive RS at a z several tens of micrometers from the surface; however, the RS value depends on the measurement method used. In this study, the RS distribution with z from the surface after milling was measured for the AA7050-T7451 aluminum alloy by two-dimensional X-ray diffraction (2D method). The results were compared with those of four prior measurement methods, and the validity of 2D method was verified. The changes in subsurface RS with z showed similar distributions under all measurement conditions except when cos(α)-XRD was employed. The 2D method provides high repeatability. The in-plane RS distribution was also measured using 2D method to investigate the effect of milling conditions on this distribution. The RS values varied markedly depending on the measurement position, particularly at a small collimator diameter of 0.146 mm, allowing detection of localized extreme RS values. The maximum RS at z = 0 mm was − 85.6 MPa at a cutting speed of vc = 200 m/s and feed per tooth of fz = 0.05 mm, while it was − 16 MPa for vc = 450 m/s and 6.8 MPa for fz = 0.2 mm, revealing that the compressive RS changes to tensile RS as vc and fz increase.

19 February 2023 in Precision Engineering
Verified
Journal Article
Closed access
CKChieko Kuji
Chieko Kuji
MMMasayoshi Mizutani
Masayoshi Mizutani
KTKana Takenaka
Kana Takenaka
KSKeita Shimada
Keita Shimada
TKToyohiko J. Konno
Toyohiko J. Konno
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa

25 December 2024 in Materials & Design
Verified
Journal Article
Open access
CKChieko Kuji
Chieko Kuji
NMNarumasa Miyazaki
Narumasa Miyazaki
MMMasayoshi Mizutani
Masayoshi Mizutani
KSKeita Shimada
Keita Shimada
NONobuki Ozawa
Nobuki Ozawa
TKTsunemoto Kuriyagawa
Tsunemoto Kuriyagawa