In this paper a combined physical–statistical approach for the downscaling of model wind speed is assessed. The key factor in this approach is the decomposition of the total error (model − observation) into a small-scale representation mismatch (RM) and a large-scale model error (ME). The RM is caused by the difference between the grid-box mean conditions of the model and the locally valid conditions. For wind speed, the RM is primarily determined by the difference in roughness between the model and the location. In the first step of the combined approach, the physical method (based on surface layer theory) adjusts the model output for the roughness characteristics at several observation sites. For these local wind estimates the RM is strongly reduced but the ME remains. To reduce this ME, the local wind estimates, together with the corresponding observations, are used in one pool to derive one linear regression equation. With local roughness length information derived from land-use maps, this re... Abstract In this paper a combined physical–statistical approach for the downscaling of model wind speed is assessed. The key factor in this approach is the decomposition of the total error (model − observation) into a small-scale representation mismatch (RM) and a large-scale model error (ME). The RM is caused by the difference between the grid-box mean conditions of the model and the locally valid conditions. For wind speed, the RM is primarily determined by the difference in roughness between the model and the location. In the first step of the combined approach, the physical method (based on surface layer theory) adjusts the model output for the roughness characteristics at several observation sites. For these local wind estimates the RM is strongly reduced but the ME remains. To reduce this ME, the local wind estimates, together with the corresponding observations, are used in one pool to derive one linear regression equation. With local roughness length information derived from land-use maps, this re...
20 September 2017 in Journal of Advances in Modeling Earth Systems
Results are presented of the GASS/EUCLIPSE single‐column model intercomparison study on the subtropical marine low‐level cloud transition. A central goal is to establish the performance of state‐of‐the‐art boundary‐layer schemes for weather and climate models for this cloud regime, using large‐eddy simulations of the same scenes as a reference. A novelty is that the comparison covers four different cases instead of one, in order to broaden the covered parameter space. Three cases are situated in the North‐Eastern Pacific, while one reflects conditions in the North‐Eastern Atlantic. A set of variables is considered that reflects key aspects of the transition process, making use of simple metrics to establish the model performance. Using this method, some longstanding problems in low‐level cloud representation are identified. Considerable spread exists among models concerning the cloud amount, its vertical structure, and the associated impact on radiative transfer. The sign and amplitude of these biases differ somewhat per case, depending on how far the transition has progressed. After cloud breakup the ensemble median exhibits the well‐known “too few too bright” problem. The boundary‐layer deepening rate and its state of decoupling are both underestimated, while the representation of the thin capping cloud layer appears complicated by a lack of vertical resolution. Encouragingly, some models are successful in representing the full set of variables, in particular, the vertical structure and diurnal cycle of the cloud layer in transition. An intriguing result is that the median of the model ensemble performs best, inspiring a new approach in subgrid parameterization.
21 February 2022 in Geoscientific Model Development
The parameterised description of subgrid-scale processes in the clear and cloudy boundary layer has a strong impact on the performance skill in any numerical weather prediction (NWP) or climate model and is still a prime source of uncertainty. Yet, improvement of this parameterised description is hard because operational models are highly optimised and contain numerous compensating errors. Therefore, improvement of a single parameterised aspect of the boundary layer often results in an overall deterioration of the model as a whole. In this paper, we will describe a comprehensive integral revision of three parameterisation schemes in the High Resolution Local Area Modelling – Aire Limitée Adaptation dynamique Développement InterNational (HIRLAM-ALADIN) Research on Mesoscale Operational NWP In Europe – Applications of Research to Operations at Mesoscale (HARMONIE-AROME) model that together parameterise the boundary layer processes: the cloud scheme, the turbulence scheme, and the shallow cumulus convection scheme. One of the major motivations for this revision is the poor representation of low clouds in the current model cycle. The newly revised parametric descriptions provide an improved prediction not only of low clouds but also of precipitation. Both improvements can be related to a stronger accumulation of moisture under the atmospheric inversion. The three improved parameterisation schemes are included in a recent update of the HARMONIE-AROME configuration, but its description and the insights in the underlying physical processes are of more general interest as the schemes are based on commonly applied frameworks. Moreover, this work offers an interesting look behind the scenes of how parameterisation development requires an integral approach and a delicate balance between physical realism and pragmatism.
1 May 1999 in Journal of Applied Meteorology and Climatology
A scheme is proposed that relates surface flux densities of sensible heat, latent heat, and momentum to routine weather data. The scheme contains parameterizations concerning the radiation components and the surface energy flux densities. The parameterizations are developed and examined using observations from 1987 of a grass-covered surface at Cabauw in the Netherlands. It is shown that improvements in the parameterizations are achieved by incorporating an albedo dependence on solar elevation, a longwave downward radiation with a correction for the amount of high clouds, and a soil heat flux with a soil temperature approximated by a 24-h-mean 2-m temperature. In addition, the Penman–Monteith concept for the latent heat flux is utilized with a simple one-parameter surface resistance, which depends on atmospheric moisture deficit in particular. Special attention is paid to the treatment of surface inhomogeneities. A distinction is made between stable conditions, when measurements in the lower 10 m... Abstract A scheme is proposed that relates surface flux densities of sensible heat, latent heat, and momentum to routine weather data. The scheme contains parameterizations concerning the radiation components and the surface energy flux densities. The parameterizations are developed and examined using observations from 1987 of a grass-covered surface at Cabauw in the Netherlands. It is shown that improvements in the parameterizations are achieved by incorporating an albedo dependence on solar elevation, a longwave downward radiation with a correction for the amount of high clouds, and a soil heat flux with a soil temperature approximated by a 24-h-mean 2-m temperature. In addition, the Penman–Monteith concept for the latent heat flux is utilized with a simple one-parameter surface resistance, which depends on atmospheric moisture deficit in particular. Special attention is paid to the treatment of surface inhomogeneities. A distinction is made between stable conditions, when measurements in the lower 10 m...