Mounting compact and lightweight base stations on unmanned aerial vehicles (UAVs) is a cost-effective and flexible solution to provide seamless coverage on the existing terrestrial networks. While the coverage probability in UAV-assisted cellular networks has been widely investigated, it provides only the first-order statistic of signal-to-interference-plus-noise ratio (SINR). In this paper, to analyze high-order statistics of SINR and characterize the disparity among individual links, we provide a meta distribution (MD)-based analytical framework for UAV-assisted cellular networks, in which the probabilistic line-of-sight channel and realistic antenna pattern are taken into account for air-to-ground transmissions. To accurately characterize the interference from UAVs, we relax the widely applied uniform off-boresight angle (OBA) assumption and derive the exact distribution of OBA. Using stochastic geometry, for both steerable and vertical antenna scenarios, we obtain mathematical expressions for the moments of condition success probability, the SINR MD, and the mean local delay. Moreover, we study the asymptotic behavior of the moments as network density approaches infinity. Numerical results validate the tightness of the theoretical results and show that the uniform OBA assumption underestimates the network performance, especially in the regime of moderate altitude of UAV. We also show that when UAVs are equipped with steerable antennas, the network coverage and user fairness can be optimized simultaneously by carefully adjusting the UAV parameters.
28 July 2009 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a design approach for wideband compensated and uncompensated Marchand baluns with stepped-impedance transformers. In order to obtain an equal-ripple bandpass response, conventional Chebyshev polynomials are modified to compensate the effect of the transfer function's dc poles. Unlike the available microwave filter design approaches, which usually require redundant elements, this approach leads to an optimum design by using the minimum number of equal length transmission line elements. Based on this design approach, both compensated and uncompensated Marchand baluns are studied. It is found that increasing difficulty arises when implementing a large bandwidth balun using the widely adopted compensated balun structure. Hence, the uncompensated balun structure becomes a better choice. To validate the proposed design approach, an uncompensated balun is designed on a standard two-sided printed circuit board. The measured results indicate that a return loss greater than 20 dB can be observed from 1 to 7.5 GHz. The phase imbalance is less than 4deg and the amplitude is less than 0.5 dB from dc to 7.2 GHz.
9 July 2019 in IEEE Transactions on Nanotechnology
A Viterbi decoder is used in many communication receivers to efficiently decode the received signal that has been convolutional encoded in the transmitter. This decoding corrects errors that occur due to noise and other imperfections in the channel and is key to achieve a low bit error rate. If the decoder is implemented on a SRAM based Field Programmable Gate Array (SRAM-FPGA), the radiation induced soft errors can affect the operation of the Viterbi decoder by corrupting the configuration memory, which can change the circuit functionality and will not be corrected unless the FPGA is reconfigured. This makes the protection of Viterbi decoders implemented on SRAM based FPGAs an important issue. In this paper, first, fault injection experiments are conducted to study the effects of soft errors on the configuration memory of an SRAM-FPGA implemented Viterbi decoder. Then, an efficient protection technique is proposed and evaluated showing that it can provide an efficient protection with a lower resource usage than the traditional Triple Modular Redundancy (TMR) approach.
Recently, orthogonal time frequency space (OTFS) was presented to combat high Doppler shifts in wireless communication systems. Most studies on OTFS signal detection require channel state information (CSI). However, it is quite difficult to describe the channel model mathematically for some communication systems. This letter proposes a low-complexity ViterbiNet-based OTFS signal detection algorithm. A neural network (NN) is used in the ViterbiNet to replace the log-likelihood calculation that requires CSI in the Viterbi algorithm. Therefore, the proposed ViterbiNet-based scheme can perform signal detection without CSI in OTFS systems. Meanwhile, since it is a model-driven network, the proposed ViterbiNet-based scheme requires only a small size NN and a small amount of training data to achieve great performance. Moreover, the softplus function is utilized as the activation function, which smoothen the training of the ViterbiNet. Through experiments, simulation results prove the performance of the presented ViterbiNet-based OTFS signal detection algorithm.
24 December 2024 in IEEE Transactions on Communications
In this paper, we exploit an emergency mobile crowdsensing (MCS) framework that utilizes unmanned aerial vehicles (UAVs) in collaboration with uncrashed base stations (BSs) to enhance sensing and communication efficiency. In the proposed framework, mobile users (MUs) equipped with sensors collect data, while UAVs, deployed as aerial relays, collaborate with uncrushed BSs to facilitate the transmission and aggregation of the sensed data from all MUs. However, the limited resources significantly affect the deployment of UAVs and the design of the UAV-relay-assisted MCS system. Moreover, selecting MUs for sensing tasks and allocating bandwidth among them are crucial factors that determine MUs’ sensing capabilities and the data transmitting policies. Incorporating with foregoing essential factors, we formulate a comprehensive problem that jointly optimizes the MU selection, bandwidth allocation, UAV deployment, as well as strategies for sensing and transmitting data, aiming to improve the total reward of agent. The formulated problem poses high challenges due to the coupling between the sensing, transmission, as well as the UAVs deployment policies. To deal with this problem, we first derive the optimal transmission power and sensing data size under given MU selection, bandwidth allocation, and UAVs deployment strategy. The original optimization problem is subsequently decomposed into three folds, corresponding to finding the optimal MU selection, bandwidth allocation solution, as well as the deployment of UAVs. Meanwhile, a joint dynamic programming and a swap-then-compare enabled algorithm is proposed to obtain the optimal MU selection and bandwidth allocation policies. Next, the successive convex approximation (SCA) techniques are used to find the optimal locations for the UAVs. Extensive numerical results verify that the proposed joint algorithm can significantly outperform several benchmark approaches.
Convolutional neural network (CNN) is an extremely powerful machine‐learning tool, especially when dealing with computer vision problems. Here, the authors present a CNN‐based modulation recognition model. In order to fully elaborate the powerful image feature extraction ability of CNN, the authors have created an image dataset of different complex signal spectrograms using short‐time Fourier transform (STFT). In this case, the complex modulation recognition problem is converted to an image recognition problem. To study the accuracy of automatic recognition of signal spectrograms, the authors have applied two approaches recently developed for image classification. The first approach is to optimise activation functions. Experiments show that best performance can be achieved when using sigmoid as activation function. The second approach is using optimisation functions. At last, the authors compared the recognition accuracy under different signal‐to‐noise ratios (SNRs). The result shows that authors’ model achieves higher recognition accuracy under low SNR and stronger generalisation ability than other recognition methods.