Photoactivated Reversible Deactivation Radical Polymerization (RDRP) technologies have emerged very recently in the field of 3D printing systems especially at the macroscale in vat‐photopolymerization‐based processes such as digital light processing (DLP). Contrary to conventional free radical photopolymerization, photoRDRP in 3D printing leads to 3D objects with living character and thus confers them the unique ability to be post‐modified after fabrication. While 3D direct laser writing (3D DLW) by two photon polymerization has become a standard for fabrication of complex 3D micro‐objects, the use of RDRP and its associated benefits has so far been under‐investigated at that scale. Herein, a photoresist suitable for 3D DLW based on nitroxide mediated photopolymerization (NMP2) is developed. The photopolymerization efficiency for fabrication of micro‐structures and their subsequent post‐modification are investigated regarding the laser power and the wavelength of excitation. Moreover, highly tunable, precise, and successive surface patterning of 2D and 3D multi‐material microstructures are demonstrated thanks to the spatial and temporal control offered by the photo‐induced post‐modification. This work highlights new directions to be explored in order to accelerate the adoption of RDRP in 3D printing based on photopolymerization.
Mammalian cells have been widely shown to respond to nano- and microtopography that mimics the extracellular matrix. Synthetic nano- and micron-sized structures are therefore of great interest in the field of tissue engineering, where polymers are particularly attractive due to excellent biocompatibility and versatile fabrication methods. Ordered arrays of polymeric pillars provide a controlled topographical environment to study and manipulate cells, but processing methods are typically either optimized for the nano- or microscale. Here, we demonstrate polymeric nanopillar (NP) fabrication using 3D direct laser writing (3D DLW), which offers a rapid prototyping across both size regimes. The NPs are interfaced with NIH3T3 cells and the effect of tuning geometrical parameters of the NP array is investigated. Cells are found to adhere on a wide range of geometries, but the interface depends on NP density and length. The Cell Interface with Nanostructure Arrays (CINA) model is successfully extended to predict the type of interface formed on different NP geometries, which is found to correlate with the efficiency of cell alignment along the NPs. The combination of the CINA model with the highly versatile 3D DLW fabrication thus holds the promise of improved design of polymeric NP arrays for controlling cell growth.