František Kovanda

Dr. František Kovanda


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 September 2019 in Catalysts
Verified
Journal Article
Open access
PDF file
KJKvěta Jirátová Jirátová
Květa Jirátová Jirátová
RPRoman Perekrestov
Roman Perekrestov
MDMichaela Dvořáková
Michaela Dvořáková
JBJana Balabánová
Jana Balabánová
PTPavel Topka
Pavel Topka
FKFrantišek Kovanda
František Kovanda
Catalytic total oxidation is an effective procedure to minimize emissions of volatile organic compounds (VOC) emissions in industrial gases. Catalysts in the form of meshes are remarkable as they minimize the internal diffusion of reactants during the reaction as well as the need of expensive active components. In this paper, various conditions of radio frequency magnetron sputtering of cobalt on stainless-steel meshes was applied during catalyst preparation. Properties of the supported Co3O4 catalysts were characterized by SEM, XRD, temperature programmed reduction (H2-TPR), FTIR, XPS, and Raman spectroscopy. Catalytic activity was examined in deep oxidation of ethanol chosen as a model VOC. Performance of the catalysts depended on the amount of Co3O4 deposited on the supporting meshes. According to specific activities (the amounts of ethanol converted per unit weight of Co3O4), smaller Co3O4 particle size led to increased catalytic activity. The catalyst prepared by sputtering in an Ar+O2 atmosphere without calcination showed the highest catalytic activity, which decreased after calcination due to enlargement of Co3O4 particles. However, specific activity of this catalyst was more than 20 times higher than that of pelletized commercial Co3O4 catalyst used for comparison.

3 January 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
KKKvěta Kupková
Květa Kupková
PTPavel Topka
Pavel Topka
JBJana Balabánová
Jana Balabánová
MKMartin Kostejn
Martin Kostejn
KJKvěta Jirátová Jirátová
Květa Jirátová Jirátová
FKFrantišek Kovanda
František Kovanda
The effect of the Co-Cu oxide catalysts composition on their physicochemical properties and performance in the deep oxidation of ethanol was studied. The catalysts with Co:Cu molar ratios of 4:1, 1:1, and 1:4 were obtained by calcination (4 h at 500 °C in air) of the coprecipitated precursors and characterized in detail using powder XRD, Raman spectroscopy, N2 physisorption, H2-TPR, and XPS. The powder XRD and Raman spectroscopy indicated the formation of Co3O4 and CuO mixtures rather than Co-Cu mixed oxides. The CuO promoted the Co3O4 reduction; the Co-Cu catalysts were reduced more easily than the single-component Co and Cu oxides and the main reduction maxima were shifted to lower temperatures with increasing cobalt content in the catalysts. The Co-Cu oxide catalyst with a Co:Cu molar ratio of 4:1 exhibited the best performance in ethanol gas-phase oxidation, showing the lowest T50 (91 °C) and T90(CO2) (159 °C) temperatures needed for 50% ethanol conversion and 90% conversion to CO2, respectively. The excellent catalytic properties of this Co-Cu oxide catalyst were ascribed to the synergistic effect of Co and Cu components. The high activity and selectivity of the Co-Cu catalyst was attributed to the presence of finely dispersed CuO particles on the surface of Co3O4.

31 August 2010 in Applied Clay Science
Verified
Journal Article
Closed access
APAnna Píšková
Anna Píšková
PBPetr Bezdička
Petr Bezdička
DHDavid Hradil
David Hradil
EKEva Káfuňková
Eva Káfuňková
KLKamil Lang
Kamil Lang
TGTomáš Matys Grygar
Tomáš Matys Grygar

5 February 2011 in Catalysis Today
Verified
Journal Article
Closed access
KKKateřina Karásková
Kateřina Karásková
Lucie ObalovaLucie Obalova
Lucie Obalova
FKFrantišek Kovanda
František Kovanda

1 January 2007 in Chemical Papers
Verified
Journal Article
Closed access
PDF file
ZMZ. Mikulová
Z. Mikulová
PČP. Čuba
P. Čuba
JBJ. Balabánová
J. Balabánová
TRT. Rojka
T. Rojka
FKFrantišek Kovanda
František Kovanda
KJKvěta Jirátová Jirátová
Květa Jirátová Jirátová

29 November 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
KJKvěta Jirátová Jirátová
Květa Jirátová Jirátová
RPRoman Perekrestov
Roman Perekrestov
MDMichaela Dvořáková
Michaela Dvořáková
JBJana Balabánová
Jana Balabánová
MKMartin Kostejn
Martin Kostejn
FKFrantišek Kovanda
František Kovanda
Magnetron sputtering is an advantageous method for preparing catalysts supported on stainless steel meshes. Such catalysts are particularly suitable for processes carried out at high space velocities. One of these is the catalytic total oxidation of volatile organic compounds (VOC), economically feasible and environmentally friendly method of VOC abatement. The reactive radio frequency (RF) magnetron sputtering of Mn and Co + Mn mixtures in an oxidation Ar + O2 atmosphere was applied to form additional thin oxide coatings on cobalt oxide layers prepared by electrochemical deposition and heating on stainless steel meshes. Time of the RF magnetron sputtering was changed to obtain MnOx and CoMnOx coatings of various thickness (0.1–0.3 µm). The properties of the supported CoOx-MnOx and CoOx-CoMnOx catalysts were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), temperature programmed reduction (H2-TPR), Fourier-transform infrared (FTIR) and Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The catalytic activity was investigated in the deep oxidation of ethanol, which was employed as a model VOC. According to the specific activities (amount of ethanol converted per unit mass of metal oxides per hour), the performance of CoOx-MnOx catalysts was higher than that of CoOx-CoMnOx ones. The catalysts with the smallest layer thickness (0.1 µm) showed the highest catalytic activity. Compared to the commercial pelletized Co-Mn-Al mixed oxide catalyst, the sputtered catalysts exhibited considerably higher (23–87 times) catalytic activity despite the more than 360–570 times lower content of the Co and Mn active components in the catalytic bed.