Biodiesel as a fuel has been shown to positively impact the environment; replacing or reducing the dependence on fossil fuels while providing a viable alternative. The use of waste oils, such as non-edible or used oils, can reduce competition with food, loss of resources, and the resulting higher prices. In this study, biodiesel was obtained by a transesterification reaction using used cooking oil from fast-food restaurants as the feedstock and catalysts from waste glass and animal bones as the silica and calcium oxide sources, respectively. Utilizing waste or non-edible oils for the production of biodiesel can lessen the competition with food sources while achieving environmental and ethical biofuel standards. Additionally, employing readily available waste oils and catalysts prepared from waste material is an economical and low-cost process compared to the use of conventional expensive feedstock and catalyst. The catalyst characterization for the prepared CaO–SiO₂ catalyst was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR). The reaction was optimized using the response surface methodology (RSM) with central composite design (CCD) by varying three parameters: methanol-to-oil ratio, catalyst weight fraction (wt%), and reaction time. The highest biodiesel yield obtained using Design Expert software was 92.3419% at the optimum conditions of a 14.83:1 methanol-to-oil molar ratio, 3.11 wt% catalyst, and 143 min reaction time. This proved that waste cooking oil with CaO–SiO₂ catalyst could be used in the transesterification process to produce a high yield of biodiesel, which was shown in the results obtained from the experimental runs.

The worldwide population growth and the technological advancements reported in the past few years have led to an increase in the production and consumption of energy. This has increased greenhouse gas (GHG) emissions, the primary driver of climate change. As a result, great attention has been paid to sustainable and green energy sources that can replace or reduce reliance on non-sustainable energy sources. Among the different types of renewable energy sources currently available, bioenergy has been reported as an attractive resource mainly due to its low cost and great availability. Bioenergy can be produced from different biomass sources and converted into biofuels or value-added products through thermochemical, biochemical, and chemical processes. Gasification is a thermochemical process commonly used for bioenergy production, and it is particularly attractive mainly due to its high efficiency. However, its performance is influenced by parameters such as type of feedstock, size of biomass particle, feed rate, type of reactor, temperature, pressure, equivalence ratio, steam to biomass ratio, gasification agent, catalyst, and residence time. In this paper, the influence of different performance parameters in the gasification process is analyzed, and optimization and modelling techniques are proposed as a strategy for product yield enhancement.

This study explores the use of a novel heterogeneous CoZnFe₄O₈ nanocatalyst for biodiesel production from a sustainable and innovative blend of waste cooking oil and neem oil feedstock. Utilizing waste cooking oil and inedible neem oil feedstock to produce biodiesel provides a green and economical way to produce renewable and environmentally friendly fuel while simultaneously reducing waste and valorizing inedible oils. Additionally, this feedstock blend does not threaten food or land resources as opposed to feedstocks obtained from edible resources. To fulfill the rising demand for biodiesel and address issues related to lower ester yields, particularly when utilizing waste cooking oils with high free fatty acid concentration, there is an urgent need for more effective processes, including two-stage transesterification. The novel CoZnFe₄O₈ nanocatalyst employed in this study demonstrated high efficiency in biodiesel production thanks to its high surface area, mesoporous structure, and catalytic properties. The effect of key process parameters, including catalyst concentration, reaction time, alcohol-to-oil molar ratio, and oil blend ratio, was investigated to evaluate the performance of the nanocatalyst and optimize the biodiesel yield with the help of Response Surface Methodology (RSM). The optimized process achieved a yield of 94.23% under optimum parameters of 2.13 wt% catalyst, 6.80:1 methanol-to-oil ratio, 4 h, and a ratio of waste cooking oil to neem oil of 98.32:1.68. The predicted and experimental values were in close agreement, indicating that the model was adequate. Additionally, detailed catalyst characterization, including analysis of the surface area, structure, and thermal stability, was carried out. Similarly, the biodiesel was characterized to assess its quality through heating value, density, Fourier Transform Infrared (FTIR) spectroscopy, and ultimate analysis. The recovery and reusability of the nanocatalyst were also investigated, highlighting its potential for multiple reaction cycles. The novel CoZnFe₄O₈ nanocatalyst and innovative feedstock blend demonstrated high efficiency in biodiesel production comparable to other nanocatalysts and feedstocks reported in the literature, highlighting their potential as an efficient and sustainable method to produce biofuels.