Computing a source-target map that yields integrable surface normal field is quite challenging for freeform illumination design. Here, we propose a least-squares ray mapping method to calculate a superior ray mapping by iteratively correcting an integrable map to approach the energy conservation and boundary condition. The process is implemented via solving three minimization problems. The first two problems can be figured out pointwise and the third can be converted to two decoupled Poisson equations with Robin boundary conditions. We demonstrate the robustness and high efficiency of the proposed method with several design examples.
We propose a method to design double smooth freeform surfaces applied in beam shaping with a ray mapping method in the paper. We couple the calculation of ray mapping and the construction of freeform surfaces to approach the surface normal field integrability condition based on the symplectic flow mapping scheme. In this paper, the incident beam wavefront is not limited to be planar or spherical. Several challenging design examples are presented that include transforming a circular Gaussian beam to an unconventional beam with variously shaped contour, and transforming an elliptic beam to a convergent beam with complex irradiance distribution in non-paraxial regime. The results show the high efficiency and feasibility of the proposed method in designing freeform optics for beam shaping applications.
The increasing demand for smart agriculture has led to the development of agricultural sensor technology. Wearable sensors show great potential for monitoring the physiological and surrounding environmental information for plants due to their high flexibility, biocompatibility, and scalability. However, wearable sensors for plants face several challenges that hinder their large-scale practical application. In this review, we summarize the current research status of wearable plant sensors by analyzing the classification, working principles, sensor materials, and structural design and discussing the multifunctional applications. More importantly, we comment on the challenges the wearable plant sensors face and provide our perspectives on further improving the sensitivity, reliability, and stability of wearable plant sensors for future smart agriculture.
China is planning to construct a new space-borne gravitational-wave (GW) observatory, the TianQin project, in which the spaceborne telescope is an important component in laser interferometry. The telescope is aimed to transmit laser beams between the spacecrafts for the measurement of the displacements between proof-masses in long arms. The telescope should have ultra-small wavefront deviation to minimize noise caused by pointing error, ultra-stable structure to minimize optical path noise caused by temperature jitter, ultra-high stray light suppression ability to eliminate background noise. In this paper, we realize a telescope system design with ultra-stable structure as well as ultra-low wavefront distortion for the space-based GW detection mission. The design requirements demand extreme control of high image quality and extraordinary stray light suppression ability. Based on the primary aberration theory, the initial structure design of the mentioned four-mirror optical system is explored. After optimization, the maximum RMS wavefront error is less than λ/300 over the full field of view, which meets the noise budget on the telescope design. The stray light noise caused by the back reflection of the telescope is also analyzed. The noise at the position of optical bench is less than 10−10 of the transmitted power, satisfying the requirements of space GW detection. We believe that our design can be a good candidate for TianQin project, and can also be a good guide for the space telescope design in any other similar science project.
Freeform illumination optics design with extended light sources to realize an accurate light control is very important, but still remains a challenging issue. Here, we propose a new method to design compact and efficient freeform lenses for extended sources. We employ a localized surface control strategy to directly modify the freeform surface to redistribute the light rays emitted from the extended LED source in a desired manner. By the combination of basic radiometry calculation and backward ray tracing, we obtain the irradiance distribution on the target plane and estimate the localized freeform surface to be modified. The optimization function with a Gaussian form is adopted to modify the localized surface. The smoothness of the freeform surface is taken into account in the optimization process to guarantee the processability of the freeform optics. We demonstrate the effectiveness of the proposed method with three design examples.
In this paper, we propose an efficient and robust approach to retrieve an optimal first-order design of a double-sided telecentric zoom lens based on the particle swarm optimization (PSO) algorithm. In this method, the design problem is transformed to realize a zoom system with fixed positions of both the front focal point and the rear focal point during zooming. Equations are derived for the paraxial design of the basic parameters of a three-component zoom lens in the framework of geometrical optics. We implement the PSO algorithm in MATLAB to design some test cases to verify the feasibility. As the computational work is completed by the optimization algorithm, instead of the traditional trial-and-error method, our proposed method is efficient and low-threshold. By a simulation result, it is verified that the described method is stable and necessary in finding a proper initial configuration of a zoom lens with two fixed foci as well as a required zoom ratio. Furthermore, a compact initial design of a three-component 2X zoom system with two fixed foci is proposed. Based on the initial design data, a double-sided telecentric zoom system is developed. The result shows the great potential of our proposed method in retrieving proper initial designs of complex optical systems.