The effect of reaction temperature and weight hourly space velocity (WHSV) on the reaction of 1-decene cracking to ethylene and propylene over H-ZSM-5 zeolite was investigated. Also, the thermal cracking reaction of 1-decene was studied by cracking over quartz sand as blank. It was observed that 1-decene undergoes a significant thermal cracking reaction above 600 degrees C over quartz sand. In the range of 500-750 degrees C, the conversion remained above 99% for 1-decene cracking over H-ZSM-5, and the catalytic cracking dominated even at 750 degrees C. With the increase in temperature, the yields of ethylene and propylene gradually increased, and the yields of alkanes and aromatics also increased. The low WHSV was favorable for the yield of light olefins. With the increase of the WHSV, the yields of ethylene and propylene decrease. However, at low WHSV, secondary reactions were accelerated, and the yields of alkanes and aromatics increased significantly. In addition, the possible main and side reaction routes of the 1-decene cracking reaction were proposed based on product distribution.
The effects of reaction conditions on the yield of ethylene and propylene from pentene cracking were investigated in a fixed-bed reactor at 500–750 °C and for a weight hourly space velocity (WHSV) of 15–83 h−1. The total yield of ethylene and propylene reached a maximum (67.8 wt%) at 700 °C and 57 h−1. In order to explore the reaction mechanism at high temperatures, a thermal/catalytic cracking proportion model was established. It was found that the proportion of pentene feed chemically adsorbed with the acid sites and cracked through catalytic cracking was above 88.4%, even at 750 °C. Ethylene and propylene in the products were mainly derived from catalytic cracking rather than thermal cracking at 650–750 °C. In addition, the suitable reaction network for pentene catalytic cracking was deduced and estimated. The results showed that the monomolecular cracking proportion increased from 1% at 500 °C to 95% at 750 °C. The high selectivity of ethylene and propylene at high temperatures was mainly due to the intensification of the monomolecular cracking reaction. After 20 times of regeneration, the acidity and pore structure of the zeolite had hardly changed, and the conversion of pentene remained above 80% at 650 °C.
Since the first Chinese fluid catalytic cracking (FCC) unit was commercialized in 1965, these milestone innovations and developments have been achieved in the historical sequence events of zeolite catalyst-riser FCC process, residue FCC process, DCC (deep catalytic cracking) process, multi-cascade riser FCC process and the ongoing high-selective FCC process in China. In the course of the development of Chinese FCC technology, many breakthroughs have been made, such as the quantities of FCCU increased dramatically from the blank beginning, the technical level of FCCU enhanced higher and higher, the capacity of FCCU grew larger and larger, and the R&D on FCC technology was from the tracking mode to the independent innovation mode. Up to now, the total capacity of FCCU in China has been reached 150 Mt/a, in which the residue ratio of FCCU feedstock is around 40%. The outputs of FCCU are roughly taking up the components of 70%, 30% and 40% to gasoline pool, diesel pool and propylene pool respectively, as well as raw materials of alkylation units and etherificationunits. Now FCC is playing a decisive role in the aspects of heavy oil processing, higher light oil recovery, products qualification improving, and better economic benefits in the oil industry of China.