Cu–Ni–Sn alloys have been widely used in the aerospace industry, the electronics industry, and other fields due to their excellent electrical and thermal conductivity, high strength, corrosion and wear resistance, etc., which make Cu–15Ni–8Sn alloys the perfect alternative to Cu–Be alloys. This paper begins with how Cu–Ni–Sn alloys are prepared. Then, the microstructural features, especially the precipitation order of each phase, are described. In addition, the influence of alloying elements, such as Si, Ti, and Nb, on its microstructure and properties is discussed. Finally, the effects of plastic deformation and heat treatment on Cu–Ni–Sn alloys are discussed. This review is able to provide insight into the development of novel Cu–Ni–Sn alloys with a high performance.

In this work, the crevice corrosion behavior and biofouling coverage of 316L stainless steel (316L SS), 2205 duplex stainless steel (2205 DSS), and 2507 super duplex stainless steel (2507 SDSS) in natural seawater were investigated through long-term field exposure tests. The results revealed that both artificial crevice corrosion and biofouling-induced crevice corrosion occurred on the surface of three stainless steels. The corrosion rate was ranked as 316L SS » 2205 DSS＞2507 SDSS. The deepest area of the artificial corrosion pit was at the edge of the crevice, which was related to the IR drop and acidification of the localized solution. The highest biofouling coverage and the most severe biofouling-induced corrosion occurred on the surface of 316L SS. The attachment of large organisms to the metal surface formed a fouling barrier layer, further blocking the flow of material over the crevices, and the artificial crevice corrosion was accelerated. The initiation of barnacle-induced corrosion was due to the formation of a crevice between the barnacle and the substrate, resulting in the entry of seawater. The acidification of the solution caused by catalytic-occluded cells was responsible for the continuous development of barnacle-induced corrosion, which was similar to the propagation of the artificial crevice corrosion.

In this paper, the effects of dispersed 3~10 nm NbC precipitates on hydrogen diffusion in X80 pipeline steel were investigated by means of high resolution transmission electron microscopy (HRTEM), electrochemical hydrogen permeation, and thermal desorption spectroscopy (TDS). The relationship between hydrogen diffusion and temperature was determined for Nb-free X80 and 0.055 wt% Nb X80 steel. The temperature dividing reversible and irreversible traps was measured, and the quantity of hydrogen captured by different traps was calculated. Three types of hydrogen trap were designed and applied in the test, and the results revealed that irreversible hydrogen traps formed by nanosized and coherent NbC precipitates markedly hindered hydrogen diffusion, and prolonged breakthrough time in Nb-bearing X80 steel.