The shearing of fractures can be a significant source of permeability change by altering the distribution of void space within the fracture itself. Common methods to estimate the effects of shearing on properties, such as aperture, roughness, and connectivity, are incapable of providing these observations in situ. Laboratory protocols are needed that enable measurements of the spatial structure of the fracture aperture field in the medium, noninvasively. Here, we investigate changes in rough‐walled Brazilian‐induced tensile fracture aperture distribution with progressive shear displacement in Westerly granite and Carrara marble using a novel X‐ray transparent core holder. The so‐called calibration‐free missing attenuation method is applied to reconstruct highly resolved (submillimeter) fracture aperture maps as a function of displacement (0 to 5.75 mm) in induced fractures. We observe that shearing increases the core‐averaged fracture aperture and significantly broadens the distribution of local values, mostly toward higher apertures. These effects are particularly strong in Westerly granite and may be the result of the higher initial roughness of its fracture surfaces. Also, while the correlation length of the aperture field increases in both parallel and perpendicular directions, significant anisotropy is developed in both samples with the progression of shearing. The results on Westerly granite provide a direct indication that fracture aperture remains largely unaffected until 1 mm of displacement is achieved, which is important when estimating permeability enhancement due to natural and induced shear displacement in faults.
1 February 2025 in Computer Methods in Applied Mechanics and Engineering
Shales are low‐permeability caprocks that confine fluid, such as CO 2 , nuclear waste, and hydrogen, in storage formations. Stress‐induced fractures in shale caprocks provide pathways for fluid to leak and potentially contaminate fresh water aquifers. Fractured shales are also increasingly considered as resources for CO 2 sequestration, enhanced geothermal, and unconventional energy recovery. Injecting reactive fluids into shales introduces chemical disequilibrium, causing an onset of a series of dissolution, precipitation, and fines mobilization mechanisms. The reactions have rapid kinetics and significant impact on porosity and permeability; consequently, flow and storage properties of caprocks. While previous research has explored the separate effects of these reactions, this study aims to uncover their simultaneous occurrence and collective influence. This study unveils these highly coupled transport and reactivity mechanisms by tracking and visualizing the reaction‐induced alterations in the matrix, microcracks, and fractures of shales over time. We conducted brine injection experiments sequentially at pH 4 and 2 in a naturally fractured Wolfcamp shale sample while simultaneously imaging the dynamic processes using X‐ray computed tomography (CT). CT images are validated by finer resolution images obtained using micro‐CT and scanning electron microscopy. We also tracked the sample permeability and fluid chemistry using brine permeability and inductively coupled plasma mass spectrometry, respectively. Findings show that fluid primarily flowed through fractures, dissolving reactive minerals and mobilizing fines on fracture surfaces. Dissolution of fracture asperities under confining stress resulted in the closing of fractures. Clogging in narrow fracture pathways, caused by fines accumulation, diverted fluid flow into matrix pores.