In order to overcome the drawbacks of expensive function evaluation in the practical reliability-based design optimization (RBDO) problem, researchers have proposed the black box-based RBDO method. The algorithm flow of the commonly employed RBDO method for the black box problem consists of the outer construction loop of the surrogate model of the constraint function and the inner surrogate model-based solving loop. To improve the solving ability of the black box RBDO problem, this paper proposes a transformation-based improved kriging method to increase the effectiveness of the two loops identified above. For the outer loop, a sample distribution-based learning function is suggested to improve the construction efficiency of the surrogate model of the constraint function. For the inner loop, a paired incremental sample-based limit reliability boundary construction approach is suggested to transform the RBDO problem into an equivalent deterministic design optimization problem that can be efficiently solved by classical optimization algorithms. The test results of five cases demonstrate that the proposed method can accurately construct the surrogate model of the constraint function and efficiently solve the black box RBDO problem.
When encountering the black-box dynamic co-design and optimization (BDCDO) problem in the multidisciplinary dynamic system, the finite difference technique is inefficient or even infeasible to provide approximate numerical gradient information for the optimization algorithm since it requires numerous original expensive evaluations. Therefore, a solving framework based on the surrogate model of the state equation is introduced to optimize BDCDO. To efficiently construct the surrogate model, a sequential sampling method is presented on the basis of the successive relative improvement ratio. Meanwhile, a termination criterion is suggested to quantify the convergence of the solution. Ultimately, the newly proposed sampling strategy and termination criterion are incorporated into the BDCDO solving framework to optimize two numerical examples and two engineering examples. The results demonstrate that the framework integrating the proposed sampling strategy and termination criterion has the best performance in terms of the accuracy, efficiency, and computational budget compared to the existing methods.
When solving the control co-design (CCD) problem using the simultaneous strategy in a deterministic manner, the uncertainty stemming from the stochastic design variables is ignored, and might have a negative influence on the performance of the dynamic system. In attempting to overcome the undesirable effect of the uncertainty, this research investigates the reliability-based control co-design (RB-CCD) problem and presents a single-loop framework for RB-CCD based on the modified RB-CCD model and single-loop approach (SLA). Specifically, the modified model is deduced by introducing additional design variables and equality constraints (state equations and algebraic equality constraints) so as to transform the probabilistic constraints into inequality constraints. Meanwhile, to enhance the solution efficiency, SLA transforms the modified RB-CCD model into an equivalent single-loop deterministic CCD model by incorporating the approximate reliability information of the stochastic design variables into the deterministic optimization. Finally, a numerical example and an engineering example are implemented to verify the feasibility and effectiveness of the single-loop RB-CCD optimization framework. The results demonstrate that the suggested single-loop framework dramatically improves the reliability of the dynamic system, and significantly increases the solving efficiency without compromising accuracy.
In sampling-based reliability analysis, a constraint with multiple failure points may lead to an inefficient iteration process and inaccurate results. To examine this problem, a novel analysis method is proposed in this article, which achieves multiple failure point-based constraint model construction. In the proposed method, a radial sampling-based subregion partition method is presented to locate the potential failure subregions that may have a failure point and to construct a subregion partition model to find the model refinement points in parallel. In addition, a new machine learning algorithm, the dendrite network, is adopted to construct the constraint model and the subregion partition model, and a network-matched learning function is designed to assist dendrite network-based model refinement. Test results demonstrate that the number of training samples is decreased compared with other citation methods.
In practical applications, the multidisciplinary dynamic system design optimization (MDSDO)-based solution is limited by uncertainty, which causes random variation in the physical design variable in the static discipline and the equation of state in the dynamic discipline. To address the lack of reliability of the MDSDO solution, a crossrate-based MDSDO approach (C-MDSDO), consisting of the MDSDO stage and a reliability assessment stage, is proposed in this paper. In the reliability assessment stage, a sub-optimization problem based on the crossrate of the objective reliability index sample trajectory is designed to obtain the shifting vector, which is employed to obtain a sufficiently reliable solution. In addition, the proposed approach adopts a sequential problem-solving framework that avoids nested optimization and a reliability assessment. One numerical case and two engineering cases were employed to validate the effectiveness of the proposed method. The results show that the reliability of the proposed solutions significantly improved.