The current paper investigates two particular features of a novel rotary split engine. This internal combustion engine incorporates a number of positive advantages in comparison to conventional reciprocating piston engines. As a split engine, it is characterized by a significant difference between the expansion and compression ratios, the former being higher. The processes are decoupled and take place simultaneously, in different chambers and on the different sides of the rotating pistons. Initially, a brief description of the engine’s structure and operating principle is provided. Next, the configuration of the compression chamber and the sealing system are examined. The numerical study is conducted using CFD simulation models, with the relevant assumptions and boundary conditions. Two parameters of the compression chamber were studied, the intake port design (initial and optimized) and the sealing system size (short and long). The best option was found to be the combination of the optimized intake port design with the short seal, in order to keep the compression chamber as close as possible to the engine shaft. A more detailed study of the sealing system included different labyrinth geometries. It was found that the stepped labyrinth achieves the highest sealing efficiency.
The current work investigates the relationship between the shape of an isolator of a concentric rotary piston compressor and the secondary peak pressure developed during each operating cycle. This peak pressure is developed when the piston passes through the isolator cavity, and it is negative for compressor efficiency. The aim of this paper is to identify the isolator cavity shape that minimizes this secondary peak to improve compressor efficiency. This study covers five different cavities that may be used in such compressors. Contrary to our expectations, the conclusion is that the best geometry is the one that can be manufactured with CNC machining. The geometry that can be manufactured with 3D printing also produces a significantly lower secondary peak pressure, but it is not cost-efficient. Another limitation of the 3D printing design is the thin walls that this cavity creates. Very thin walls may cause significant deformation during the compression cycle. The conclusion is that there is a CNC machining design that is cost-efficient and allows for higher compressor performance.
22 August 2023 in Green Energy and Environmental Technology