Combined lengthening of the cavity of a passive mode-locked fibre master oscillator and implementation of a new concept of intra-cavity power management led to achievement of a record-high pulse energy directly at the output of the mode-locked fibre master oscillator (without any subsequent amplification) exceeding 12 µJ. Output powers at the level of > 12 µJ obtainable from a long-cavity mode-locked fibre master oscillator open new possibilities of application of all pulse types that can be generated in such oscillators.
This work presents implementation of a new approach to single-cascade Raman conversion of laser pulses from the spectral range around 1.1 µm into the 1.3-µm wavelength region. The proposed conversion technique relies on double-scale pico-femtosecond pulses for synchronous pumping of an external cavity made of phosphosilicate fiber with high-precision adjustment of pulse repetition rate to the inter-mode frequency of the external cavity. This enabled generation of double-scale pulses centered at 1270 nm featuring a record energy of 63 nJ and the pulse envelope duration of 88–180 ps with the sub-pulse duration of 200 fs. The fraction of the radiation that was converted into the 1270 nm range amounted to 47 percent of the total Raman-converted radiation power. The generated results offer promising possibilities for new spectral ranges to be developed in the field of high-energy pulsed sources with unique double-scale temporal structure.
A novel practical method for electronic triggering of essentially different pulsed regimes in fiber cavity lasers is introduced. The method relies on electronic control of complementary transmission characteristics of a fiber-coupled LiNbO3 waveguide electro-optic switch (WEOS) which plays the role of the variable output coupler in a fiber cavity. The method was studied using a testbed laser configuration comprised of a semiconductor optical amplifier (SOA) and an all-fiber cavity. Modulation of the WEOS-based output coupling in the fast gain recovery configuration allowed not only high-quality mode locking and harmonic mode-locking at certain pulse repetition rates determined by the cavity round trip time, but it also allowed nanosecond pulsed output of the same quality to be yielded by cavity dumping at widely and continuously tunable repetition rate (ranging from kHz to MHz). Thus, WEOS-based electronically variable output coupling allows uniquely high flexibility for lasing regimes and characteristics within a single all-fiber cavity configuration.
Primary methods for generating short pulses in lasers require intracavity elements or physical mechanisms for modulation or the saturable absorption of radiation. This often complicates laser design and limits capabilities, particularly beyond single-wavelength operation. We propose and explore a method for the synchronous generation of bicolor, high-repetition-rate pulses that combines stimulated emission from Yb rare-earth ions and Raman scattering in a shared all-fiber laser cavity, without employing saturable absorbers or modulators. The proposed mechanism for pulsed lasing is analogous to an optical shift register, with two pulse trains shifting relative to each other by one period after every round trip. This naturally solves the critical problem of compensating for the dispersion-induced differential delay of bi-chromatic pulses during an intracavity round trip. The shift register inherently enables stationary generation of bi-chromatic pulses with a common relatively high repetition rate that is inversely proportional to the differential delay. We have demonstrated the feasibility of the proposed technique through the stable generation of sub-nanosecond bi-chromatic (1066 and 1241 nm) pulses with a repetition rate exceeding 166 MHz. The proposed approach is rather general, and we anticipate that it can facilitate more affordable bi-chromatic pulse generation in a variety of laser systems.
23 September 2020 in Journal of the Optical Society of America B
In this work, we discovered the possibility of greatly relaxing requirements to the speed and dynamic range of pump power variation and, thus, of reducing synchronous pumping of ytterbium (Yb)-based fiber lasers to a very simple pump modulation yielding a mode-locked pulsed output. We show that even slow (microsecond-scale) low-index ( ) sine-wave synchronous modulation of the pump power can result in shaping of a regular train of nanosecond laser pulses. It is revealed that the energy-conservative process of laser pulse shortening against the pump modulation period can take place in the quasi–two-level laser active medium owing to mistiming-induced gain discrimination of the temporal laser pulse profile. Thus, nanosecond pulses with energy up to 50 nJ were obtained in our experimental all-fiber Yb-based laser configuration. Our theoretical modeling reveals routes to much stronger pulse shortening through tunable pump modulation parameters. This discovery allows the establishment of more reliable and easy-to-implement high-efficiency alternatives to other types of high-energy ultralong mode-locked fiber lasers.
We present a simple and efficient method for generating regular pulse trains with GHz pulse repetition rates in lasers based on semiconductor optical amplifiers (SOAs). This method enables pulse formation without active modulation or saturable absorption of the generated radiation. The method relies upon the self-sustaining cross-gain modulation which is achieved by adding the negative optical feedback (NOF) to a ring laser configuration. The resulting modulation of laser gain is shown to be restricted to the frequencies which match both the spacing of longitudinal laser modes and the highest peaks in the NOF-induced instability gain spectrum. This enables the reproducible stationary pulse generation at the strictly defined repetition rates. The feasibility of the method was confirmed by the stable generation of sub-nanosecond pulses at repetition rates up to 1.79 GHz in a SOA-based laser with a simple fiber cavity.