Plasma wakefield acceleration revolutionized the field of particle accelerators by generating gigavolt-per-centimeter fields. To compete with conventional radio-frequency (RF) accelerators, plasma technology must demonstrate operation at high repetition rates, with a recent research showing feasibility at megahertz levels using an Argon source that recovered after about 60 ns. Here we report about a proof-of-principle experiment that demonstrates the recovery of a Hydrogen plasma at the sub-nanosecond timescale. The result is obtained with a pump-and-probe setup and has been characterized for a wide range of plasma densities. We observed that large plasma densities reestablish their initial state soon after the injection of the pump beam ( < 0.7 ns). Conversely, at lower densities we observe the formation of a local dense plasma channel affecting the probe beam dynamics even at long delay times ( > 13 ns). The results are supported with numerical simulations and represent a step forward for the next-generation of compact high-repetition rate accelerators.

We present an analysis of the performance of a broadband secondary radiation source based on a high-gradient laser-plasma wakefield electron accelerator. In more detail, we report studies of compact and ultra-short X-ray generation via betatron oscillations in plasma channels. For the specific working point examined in this paper, determined by the needs of other experiments ongoing at the facility, at ∼0.02 Hz operation rate, we have found ≲${10}^6$ photons emitted per shot (with a fluctuation of $50\%$) in the soft X-rays, corresponding to a critical energy of ∼0.8 keV (with a fluctuation of 40%). The source will be implemented for experiments in time-domain spectroscopy, e.g., biological specimens, and for other applications oriented to medical physics.

Plasma wakefield acceleration is nowadays very attractive in terms of accelerating gradient, able to overcome conventional accelerators by orders of magnitude. However, this poses very demanding requirements on the accelerator stability to avoid large instabilities on the final beam energy. In this study we analyze the correlation between the driver-witness distance jitter (due to the radio-frequency timing jitter) and the witness energy gain in a plasma wakefied accelerator stage. Experimental measurements are reported by using an electro-optical sampling diagnostics with which we correlate the distance between the driver and witness beams before the plasma accelerator stage. The results show a clear correlation due to such a distance jitter, highlighting the contribution coming from the radio-frequency (RF) compression.

EuPRAXIA@SPARC_LAB is an FEL (Free-Electron Laser) user facility currently under construction at INFN-LNF in the framework of the EuPRAXIA collaboration. The electron beam will be accelerated to 1 GeV by an X-band RF linac followed by a plasma wakefield acceleration stage. This high-brightness linac requires diagnostic devices able to measure the beam parameters with high accuracy and resolution. To monitor the beam energy and its spread, magnetic dipoles and quadrupoles will be installed along the linac, in combination with viewing screens and CMOS cameras. Macroparticle beam dynamics simulations have been performed to determine the optimal energy measurement setup in terms of accuracy and resolution. Similar diagnostics evaluations have been carried out for the spectrometer installed at the 100 MeV RF linac of the radioactive beam facility SSRIP (IFIN-HH, Romania), whose commissioning, foreseen for 2026, will be performed by INFN-LNF in collaboration with IFIN-HH. Optics measurements have been performed to characterize the resolution and magnification of the optical system that will be used at SSRIP, and probably also at EuPRAXIA@SPARC_LAB, for beam energy monitoring.