Bhiksha Gugulothu

Prof. Bhiksha Gugulothu

Mechanical Engineering, Bule Hora University, Hagere Maryam, Ethiopia
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SJS. Jayaprakash
S. Jayaprakash
SCS. Siva Chandran
S. Siva Chandran
SATHISH THANIKODISATHISH THANIKODI
SATHISH THANIKODI
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
RRR. Ramesh
R. Ramesh
RSRam Subbiah
Ram Subbiah
Friction stir welding is an innovative welding process for similar and dissimilar joining of the materials effectively. FSW simply modified the grain structure and also improved the strength of the joints for any type of alloying elements. This experimental study planned to carry out the joining process for dissimilar materials such as aluminium alloys 5083 and 7068. Three different types of tools are involved to find the ultimate tensile strength and Vickers hardness. The tool types are straight cylindrical tool, taper cylindrical tool, and triangular tool. The process factors for this investigation are a rotational speed of 800, 1000, 1200, and 1400 rpm, welding speed of 30, 40, 50, and 60 mm/min, axial force of 3, 4, 5, and 6 kN, and plate thickness of 5, 6, 7, and 8 mm. The hardness value and the ultimate tensile strength were increased in the welding zone, which proves the effects of tool profiles are efficiently utilized.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
MKM. Kavitha
M. Kavitha
VMV. M. Manickavasagam
V. M. Manickavasagam
SATHISH THANIKODISATHISH THANIKODI
SATHISH THANIKODI
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
AKA. Sathish Kumar
A. Sathish Kumar
RSRam Subbiah
Ram Subbiah
Aluminium alloy is widely used in engineering application, and it can be classified based on the constituent elements or alloying elements. Aluminium alloy is preferred for the nature of its tensile strength, ductility, and corrosion resistance in this research to make a dissimilar friction stir welding joint of aluminium alloys 7079 and 8050 materials. The tensile strength of the weld joint is estimated by the influence of the response surface methodology approach. The welding is carried out by preferred process parameters with a tool speed of 1000–2500 rpm, tool pin diameter of 2–6 mm, welding speed of 50–300 mm/min, and tool shoulder diameter of 10–20 mm. The ANOVA analysis and the prediction of tensile strength were conducted efficiently. From the RSM analysis, the tool pin diameter mostly modified the output of the result.

1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
NNN. Nagarajan
N. Nagarajan
APA. Pradeep
A. Pradeep
GSG. Saravanan
G. Saravanan
VSvijayakumar Sivasundar
vijayakumar Sivasundar
JRJanardhana Rao
Janardhana Rao
This work concentrated on preparation of Al‐based composites through stir casting process. Al6082 was chosen as base material that is reinforced with zirconium silicate and titanium carbide. As per Taguchi design L16 orthogonal array, specimens are produced with variation of casting parameters for performing tensile and hardness test. In this process, ZrSiO₄ is kept constant to 10 wt%, whereas TiC concentration varied from 2.5 to 10wt%. For analyzing the properties of optimized stir cast samples for AA6082/ZrSiO4/TiC, three input variables with four levels are taken such as Stir speed (SS) 300‐750 rpm, Stir time (ST) 5‐20 min, and Reinforcement (RI) 2.5‐10 wt%. The Taguchi technique was used as an analyzer to determine optimal parameter on Tensile Strength (TS) and Hardness (HN). The Minitab‐17 software is assisting to find analysis of variance (ANOVA), regression equation, and contour plots of the selected parameters. Finally, it is witnessed that SS (65.9%) is the maximum influenced factor that increases TS, followed by RI (23.1%) and ST (11%). The best combinations of parameters on TS and HN were found at SS2‐ST1‐RI2 (450 rpm, 5 min, and 5wt%) and SS3‐ST2‐RI4 (600 rpm, 10 min, and 10wt percent), respectively. From the contour plots, the casting variables SS (600‐650 Rpm), ST (15‐17.5 min), and RI (5‐8 wt%) were proposed for achieving excellent mechanical properties.

2 May 2023 in International Journal on Interactive Design and Manufacturing (IJIDeM)
Verified
Journal Article
Closed access
PDF file
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
KBK. Bharadwaja
K. Bharadwaja
SVS. Vijayakumar
S. Vijayakumar
TRT. V. Janardhana Rao
T. V. Janardhana Rao
MSM. Naga Swapna Sri
M. Naga Swapna Sri
MAManoj Kumar Agrawal
Manoj Kumar Agrawal

3 March 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
SSS. Lakshmi Sankar
S. Lakshmi Sankar
VSvijayakumar Sivasundar
vijayakumar Sivasundar
APAdina Srinivasa Vara Prasad
Adina Srinivasa Vara Prasad
MTM. Thangaraj
M. Thangaraj
TRT.V.JAnardhana Rao
T.V.JAnardhana Rao
The present study deals with preparation of Al hybrid metal matrix composites by the stir casting technique. In this work, Al5052 alloy was selected as the main metal which reinforces with zirconium dioxide and aluminium oxide. The wear test has been conducted on the POD apparatus. 9 specimens are produced by varying reinforcements percentage for conduction of tests. The amount of ZrO2 reinforcement is fixed to 8wt, while the concentration of Al2O3 varied from 5wt to 10wt. The parametric optimization of wear behaviour is done through the Taguchi method with L9 orthogonal array. Minitab statistical software helped to find SN ratio and ANOVA reading for each parameter: load (N), sliding speed (rpm), and wt of reinforcements. From the ANOVA outcome, the load parameter is the highest influencing element that improves wear resistance of made samples around 46, followed by weight of reinforcement 29 and sliding speed 26 as second and third influenced parameters, respectively.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Bhiksha GugulothuBhiksha Gugulothu
Bhiksha Gugulothu
P S Satheesh KumarP S Satheesh Kumar
P S Satheesh Kumar
BSBathula Srinivas
Bathula Srinivas
ARAlapati Ramakrishna
Alapati Ramakrishna
SVS. Vijayakumar
S. Vijayakumar
This study explained about machining parameters of Al5086/Flyash/Sic hybrid metal matrix composites by the Taguchi technique. Al5086 reinforced in SiC (5–10 wt %) and 8% weight of flyash are retained as constants. The specimens are prepared with the help of the stir casting method. The material removal rate was examined by electrochemical machining under various parameters such as feed rate (0.15–0.30 mm/min), voltage (10–20 V), and electrolyte concentration (20–35 g/litre). Taguchi’s L16 orthogonal array was selected for design of experiments (DOEs), and 16 experimental tests were conducted to examine the effect of the selected machining parameters employed to identify the best optimal levels and also to investigate the effect of electrochemical machining parameters on MRR determined by Minitab‐18.