The removal of water from archaeological wooden objects for display or storage is of great importance to their long-term conservation. Any mechanical instability caused during drying can induce warping or cracking of the wood cells, leading to irreparable damage of the object. Drying of an object is commonly carried out in one of three ways: (i) air-drying with controlled temperature and relative humidity, (ii) drying-out of a non-aqueous solvent or (iii) freeze-drying. Recently, there has been great interest in the replacement of the standard, but limited, polyethylene glycol with biopolymers for wood conservation; however, their behaviour and action within the wood is not completely understood. Three polysaccharides—low-molar-mass (Mw) chitosan (Mw ca. 60,000 g/mol), medium-molar-mass alginate (Mw ca. 100,000 g/mol) and cellulose nanocrystals (CNCs)-are investigated in relation to their drying behaviour. The method of drying reveals a significant difference in the morphology of these biopolymers both ex situ and within the wood cells. Here, the effect these differences in structuration have on the coating of the wood cells and the biological and thermal stability of the wood are examined, as well as the role of the environment in the formation of specific structures. The role these factors play in the selection of appropriate consolidants and drying methods for the conservation of waterlogged archaeological wooden objects is also investigated. The results show that both alginate and chitosan are promising wood consolidants from a structural perspective and both improve the thermal stability of the lignin component of archaeological wood. However, further modification would be necessary to improve the biocidal activity of alginate before it could be introduced into wooden objects. CNCs did not prove to be sufficiently suitable for wood conservation as a result of the analyses performed here.
Archaeological wood can be preserved in waterlogged conditions. Due to their degradation in the ground, these archaeological remains are endangered after their discovery, since they decay irretrievably during drying. Conservation measures are used to preserve waterlogged archaeological objects, maintaining their shape and character as much as possible. However, different methods have been developed leading to varying results. This study compares their effectiveness in order to clarify their mode of action. The methods including alcohol-ether resin, lactitol/trehalose, melamine formaldehyde, polyethylene glycol impregnation prior to freeze–drying, saccharose and silicone oil were assessed by analysing mass changes and volume stability using structured-light 3D scanning. The state of the conserved wood samples including the spatial distribution of the conservation agent was examined using synchrotron micro-computed tomography. Raman spectroscopy was used to observe the agent´s spatial distribution within the cells. The findings demonstrated that melamine formaldehyde stabilises the degraded cell walls. The lumens are void, as in the case with alcohol-ether resin, while polyethylene glycol, silicone oil, saccharose and lactitol/trehalose also occupy the lumens. It is assumed that the drying method has an effect on the distribution of the solidifying agent. The knowledge gained affords insights into the mechanism of conservation methods, which in turn accounts for the varied outcomes. It also allows conclusions to be drawn about the condition and stability of conserved museum objects and serves as a starting point for the further development of conservation methods.
Impressive wooden objects from past cultures can last for centuries or millennia in waterlogged soil. The aim of conservation is to bring the more or less degraded waterlogged archaeological wooden (WAW) finds to a stable state without altering the wood structure through shrinkage, collapse, and deformation. In this study, the most used methods in the conservation practice, such as the alcohol-ether resin method, conservation with the melamine formaldehyde resin Kauramin 800, a mixture of lactitol and trehalose, saccharose, silicone oil, and three different conservation methods with polyethylene glycol followed by freeze-drying were tested. The effects of the conservation agents on the structure of archaeological pine were investigated using optical light microscopy (reflected light microscopy, RLM), scanning electron microscopy (SEM), and X-ray computed tomography (XCT). Through the examinations, most conservation agents could be identified in the structure and their impact on conservation could be analyzed. In particular, it was possible to trace the incorporation of the conservation agents in the lumen, which was influenced by factors, such as wood anatomy, degree of degradation, and drying process. Differences in the mode of action of the conservation processes could also be identified in the composition of the cell wall tracheids.
2 June 2023 in Journal of the American Institute for Conservation
A scientific re-examination of the horned helmets from Viksø enabled the age of the organic material inside the horn openings to be determined using radiocarbon dating, establishing a terminus ante quem for the active use of the helmets before 906–850 cal BCE. Microscopic and organic analyses of the organic substance revealed two distinct layers. The black substance that filled the horn opening was determined to be birch tar obtained by the per descensum process. It was also found to be present at the joints inside the helmet. We believe the brown fibrous structure to be raffia, an organic material that may have been used to secure any decorative elements that were glued into the openings. A source-critical comparison of Late Bronze Age birch tar products highlights the originality of its use for the construction and decoration of high-status ritual artefacts. The various uses of birch bark tar in the manufacture of the Viksø helmets illustrate the link between the production technology of tar and its areas of application in the Late Bronze Age, and attest to the specialised knowledge required in the production of adhesives. Since awareness of the relationship between material quality and technology is a driving force in the establishment of trade networks, this study includes a state-of-the-art catalogue of Scandinavian tar finds from the Bronze Age as well as an in-depth analysis of the use of adhesives in southern Scandinavia to identify potential future research directions.
During conservation treatment, the greatest threat to waterlogged archaeological wooden (WAW) objects is collapse and/or shrinkage, which can occur during the drying process. Recent work undertaken by the CuTAWAY project revealed, using Micro-computed tomography (micro-CT), that the extent of adverse structural changes found internally in conserved WAW was far greater than generally anticipated. Suggesting a need for conservators to be able to monitor and assess the internal condition of WAW, prior to, during and after treatment. In this study, it was found that X-ray imaging offers a faster and more widely available alternative to micro-CT scanning. While the images are lower resolution than their micro-CT counterparts, they were able to make out the vast majority of internal damages present in a range of samples during various stages of treatment. However, the correct interpretation of internal damage in the X-ray images requires an underlying knowledge of the wood material.