Air Traffic Flow Management (ATFM) delay can quantitatively reflect the congestion caused by the imbalance between capacity and demand in an airspace network. Furthermore, it is an important parameter for the ex-post analysis of airspace congestion and the effectiveness of ATFM strategy implementation. If ATFM delays can be predicted in advance, the predictability and effectiveness of ATFM strategies can be improved. In this paper, a short-term ATFM delay regression prediction method is proposed for the characteristics of the multiple sources, high dimension, and complexity of ATFM delay prediction data. The method firstly constructs an ATFM delay prediction network model, specifies the prediction object, and proposes an ATFM delay prediction index system by integrating common flow control information. Secondly, an ATFM delay prediction method based on feature extraction modules (including CNN, TCN, and attention modules), a heuristic optimization algorithm (sparrow search algorithm (SSA)), and a prediction model (LSTM) are proposed. The method constructs a CNN-LSTM-ATT model based on SSA optimization and a TCN-LSTM-ATT model based on SSA optimization. Finally, four busy airports and their major waypoints in East China are selected as the ATFM delay prediction network nodes for example validation. The experimental results show that the MAEs of the two models proposed in this paper for ATFM delay regression prediction are 4.25 min and 4.38 min, respectively. Compared with the CNN-LSTM model, the errors are reduced by 2.71 min and 2.59 min, respectively. Compared with the TCN-LSTM model, the times are 3.68 min and 3.55 min, respectively. In this paper, two improved LSTM models are constructed to improve the prediction accuracy of ATFM delay duration so as to provide support for the establishment of an ATFM delay early warning mechanism, further improve ATFM delay management, and enhance resource allocation efficiency.

Standardized Taxiing Routes (STRs) are defined as published taxiing-in and taxiing-out routes for aircraft between gates and runways, aiming at improving ground movement safety at busy or complex airports. Most of the STRs specify only one path between each O–D (Origin–Destination) pair, which compromises the flexibility of route choice in time-varying traffic scenarios. In this paper, we present a holistic approach of planning and validating Multi-Path Standardized Taxiing Routes (MPSTRs) based on System-Optimal Traffic Assignment (SOTA), by firstly defining the flow-based congestion cost of runway, taxiway, and sectorized apron operation at a macroscopic level. A human-in-the-loop experiment comprised of six operation scenarios follows to investigate the impact of the pre-planned MPSTRs on human controllers’ performance. Results confirm the positive effect of the MPSTRs on taxiing performance without increasing the controllers’ workload, which also implies that the MPSTRs would be a promising approach for balancing safety and efficiency for the STRs-based taxiing operation and dynamic routing optimization without substantial investment.

Continuous Descent Operations (CDO) has been recognized as an effective way to significantly reduce fuel burn and noise impact. Designing efficient and flexible arrival routes for generating conflict-free and economical trajectories is a cornerstone for fully achieving CDO by high-level automation in high-density traffic scenarios. In this research, inspired by the Point Merge (PM), we design the Inverted Crown-Shaped Arrival Airspace (ICSAA) and its operational procedures to support Omni-directional CDO. In order to generate optimal conflict-free trajectories for upcoming aircraft in an efficient manner, we established a multi-objective trajectory optimization model solved by Non-dominated Sorting Genetic Algorithm with Elitist Strategy (NSGA-II). The Pareto solutions of minimal fuel consumption and trip time were achieved in single aircraft and highly complex multi-aircraft scenarios. Among all the elements of Pareto front, we obtained an unique solution with Entropy-Weights Method and TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) to strike a better trade-off among collision probability, fuel consumption, and trip time, which incorporates both air traffic controller’s and pilot’s interests. The effectiveness of CDO performance improvement and computational efficiency in different scenarios were verified. The ICSAA would be a promising structure that promotes the application of automated and flexible CDO.

Aviation networks exhibit multi-layer characteristics and heterogeneity of nodes and edges. Identifying key nodes in a multi-layer heterogeneous aviation network (MHAN) and elucidating its cascading failure process are of great practical significance for enhancing the ability to resist failure and strengthening network resilience. Therefore, this paper first establishes the basic model of MHAN and then designs an intra-layer node importance evaluation method based on the improved TOPSIS-grey correlation analysis (ITG) method and an inter-layer influence weight quantification method based on the gravity model. By integrating the information transmission characteristics between network nodes, a key node identification method in MHAN through aggregating multi-source information is proposed. Finally, based on the actual overload operation of aviation networks, the initial load adjustment coefficient, capacity limit, and overload coefficient are introduced based on the traditional capacity–load model, a cascading failure model of MHAN considering overload condition and failure probability is constructed, and a node influence index based on this model is defined to verify the accuracy of the key node identification results. The instance analysis conducted on the aviation network in western China demonstrates that the intra-layer node importance evaluation method based on ITG yields results with better distinguishability and higher accuracy. The key nodes are predominantly hub en-route nodes and sector nodes. In the cascading failure model, increasing the overload coefficient and capacity limit within a specific range while reducing the initial load adjustment coefficient helps reduce the network failure scale. The key nodes identified by the node influence index are consistent with those identified by the method proposed in this paper, validating the accuracy and effectiveness of the key node identification method in MHAN through aggregating multi-source information herein.

In order to strengthen the construction of smart airports and improve the ability of airport managers to identify, intervene and rescue delayed flights, this paper proposes a delay prediction method for the whole process of transit flights through the basic steps of node time and link time prediction and delayed flight identification. By designing the key node time prediction model (ML-DM), the method predicts the important guaranteed node time involved in the process of flight departure from the outstation to the departure from the current station. By constructing the imbalance data classification model, the delayed flight is identified at each predicted guarantee node. The experimental results for a busy airport show that this prediction method can achieve a maximum recognition rate of 96.5% for delayed flights.

With the rapid expansion of the aviation industry, an increasing number of Close Spaced Parallel Runway (CSPR) airports are either planning or constructing End Around Taxiways (EAT) to alleviate field operation pressures and enhance safety. Taking Shanghai Hongqiao Airport’s typical CSPR EAT configuration as a case study, this research integrates the airport’s current operational status with the anticipated requirements for future structural renovations and increased flight volumes. Various operational scenarios are established, and simulation research on optimising EAT operations is conducted in advance. The simulation study proceeds as follows: first, an AirTOP simulation model is constructed based on Hongqiao Airport’s actual operational construction. Subsequently, leveraging existing operational scenarios, five simulation scenarios are devised by activating EATs at the departure and approach ends of the eastern zone. The merits and drawbacks of these scenarios are thoroughly analysed. The findings indicate that, with escalating flight volumes, the utilisation of EAT for larger aircraft can curtail their holding duration by nearly 8 min, consequently reducing overall arrival holding duration by 6 min. Departures from gates proximate to T1 experience a 3-min reduction in holding duration through the adoption of EAT at the approach end. Despite an increase in taxi distance due to a higher proportion of aircraft taxiing around, the overall taxi time is diminished. Activating EATs at the departure and approach ends of the eastern zone effectively mitigates the adverse effects of heightened flight volumes on field operational efficiency.