We describe the novel, multiply gaited, vectored water-jet, hybrid locomotion-capable, amphibious spherical robot III (termed ASR-III) featuring a wheel-legged, water-jet composite driving system incorporating a lifting and supporting wheel mechanism (LSWM) and mechanical legs with a water-jet thruster. The LSWM allows the ASR-III to support the body and slide flexibly on smooth (flat) terrain. The composite driving system facilitates two on-land locomotion modes (sliding and walking) and underwater locomotion mode with vectored thrusters, improving adaptability to the amphibious environment. Sliding locomotion improves the stability and maneuverability of ASR-III on smooth flat terrain, whereas walking locomotion allows ASR-III to conquer rough terrain. We used both forward and reverse kinematic models to evaluate the walking and sliding gait efficiency. The robot can also realize underwater locomotion with four vectored water-jet thrusters, and is capable of forward motion, heading angle control and depth control. We evaluated LSWM efficiency and the sliding velocities associated with varying extensions of the LSWM. To explore gait stability and mobility, we performed on-land experiments on smooth flat terrain to define the optimal stride length and frequency. We also evaluated the efficacy of waypoint tracking when the sliding gait was employed, using a closed-loop proportional-integral-derivative (PID) control mechanism. Moreover, experiments of forward locomotion, heading angle control and depth control were conducted to verify the underwater performance of ASR-III. Comparison of the previous robot and ASR-III demonstrated the ASR-III had better amphibious motion performance.

With the goal of supporting close-range observation tasks of a spherical amphibious robot, such as ecological observations and intelligent surveillance, a moving target detection and tracking system was designed and implemented in this study. Given the restrictions presented by the amphibious environment and the small-sized spherical amphibious robot, an industrial camera and vision algorithms using adaptive appearance models were adopted to construct the proposed system. To handle the problem of light scattering and absorption in the underwater environment, the multi-scale retinex with color restoration algorithm was used for image enhancement. Given the environmental disturbances in practical amphibious scenarios, the Gaussian mixture model was used to detect moving targets entering the field of view of the robot. A fast compressive tracker with a Kalman prediction mechanism was used to track the specified target. Considering the limited load space and the unique mechanical structure of the robot, the proposed vision system was fabricated with a low power system-on-chip using an asymmetric and heterogeneous computing architecture. Experimental results confirmed the validity and high efficiency of the proposed system. The design presented in this paper is able to meet future demands of spherical amphibious robots in biological monitoring and multi-robot cooperation.

Soft actuators are the components responsible for organs and tissues adsorptive fixation in some surgical operations, but the lack of shape sensing and monitoring of a soft actuator greatly limits their application potential. Consequently, this paper proposes a real-time 3D shape reconstruction method of soft surgical actuator which has an embedded optical fiber with two Fiber Bragg Grating (FBG) sensors. First, the design principle and the sensing of the soft actuator based on FBG sensors are analyzed, and the fabrication process of soft actuator which has an embedded optical fiber with two FBG sensors is described. Next, the calibration of the FBG sensors is conducted. Based on curvatures and curve fitting functions, the strategy of 3D shapes reconstruction of the soft actuator is presented. Finally, some bending experiments of the soft actuator are carried out, and the 3D shapes of the soft actuator at different bending states are reconstructed. This well reconstructed 3D shape of a soft actuator demonstrates the effectiveness of the shape reconstruction method that is proposed in this paper, as well as the potential and increased applications of these structures for real soft surgical actuators.

To meet the application requirements of curvature measurement for soft biomedical robotics and flexible morphing wings of aircraft, the optical fiber Bragg grating (FBG) shape sensor for soft robots and flexible morphing wing was implemented. This optical FBG is embedded in polyimide film and then fixed in the body of a soft robot and morphing wing. However, a lack of analysis on the embedded depth of FBG sensors in polyimide film and its sensitivity greatly limits their application potential. Herein, the relationship between the embedded depth of the FBG sensor in polyimide film and its sensitivity and stability are investigated. The sensing principle and structural design of the FBG sensor embedded in polyimide film are introduced; the bending curvatures of the FBG sensor and its wavelength shift in polyimide film are studied; and the relationship between the sensitivity, stability, and embedded depth of these sensors are verified experimentally. The results showed that wavelength shift and curvature have a linear relationship. With the sensor’s curvature ranging from 0 m⁻¹ to 30 m⁻¹, their maximum sensitivity is 50.65 pm/m⁻¹, and their minimum sensitivity is 1.96 pm/m⁻¹. The designed FBG sensor embedded in polyimide films shows good consistency in repeated experiments for soft actuator and morphing wing measurement; the FBG sensing method therefore has potential for real applications in shape monitoring in the fields of soft robotics and the flexible morphing wings of aircraft.

Purpose: Soft robotics is a burgeoning field owing to its high adaptability and safety in human–machine interaction and unstructured environments. However, the feedback control of soft actuators with flexible sensors is still a challenge. Design/methodology/approach: To address this issue, this study proposes an optical fibre-based sensing membrane for the posture measurement of soft pneumatic bending actuators. The major contribution is the development of a flexible sensing membrane with a high sensitivity and repeatability for the feedback control of soft actuators. The characteristics of sensing membrane were analysed. The relationship between wavelength shift and bending curvature was derived. The curvatures of soft actuator were measured at four bending status, and the postures were reconstructed. Findings: The results indicate that the measurement error is less than 2.1% of the actual bending curvature. The sensitivity is up to 212.8 pm/m⁻¹, and the signal fluctuation in repeated measurements is negligible. This approach has broad application prospects in soft robotics, because it makes the optical fibre achieve more strength and compatible with soft actuators, thus improving the sensing accuracy, sensitivity and reliability of fibre sensors. Originality/value: Different from previous approaches, an optical fibre with FBGs is embedded into a multilayered polyimide film to form a flexible sensing membrane, and the membrane is embedded into a soft pneumatic bending actuator as the smart strain limited layer which is able to measure the posture in real time. This approach makes the optical fibre stronger and compatible with the soft pneumatic bending actuator, and the sensing accuracy, sensitivity and reliability are improved. The proposed sensing configuration is effective for the feedback control of the soft pneumatic bending actuators.

This paper used three on-land locomotion gaits and underwater swim for an amphibious spherical robot, controlled using a closed-loop method.