Diego Macedo Veneu

Dr. Diego Macedo Veneu


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 June 2017 in Environmental Technology
Verified
Journal Article
Closed access
DVDiego Macedo Veneu
Diego Macedo Veneu
CSClaudio Luiz Schneider
Claudio Luiz Schneider
MMMarisa Bezerra de Mello Monte
Marisa Bezerra de Mello Monte
OCOsvaldo Galvão Caldas Cunha
Osvaldo Galvão Caldas Cunha
LYLídia Yokoyama
Lídia Yokoyama
The potential of Bioclastic Granules – BG (calcium-carbonate-based material) using the algae Lithothamnium calcareum as sorbent for the removal of Cd(II) from aqueous solutions by sorption was evaluated through batch and continuous systems tests using a fixed-bed column. Sorption process variables, in particular pH (2–7), particle size (<38–300 μm), initial BG concentration (0.1–1.0 g L−1), initial Cd(II) concentrations (5–400 mg L−1) and contact time (5–240 min), were evaluated. Adsorption isotherm profiles of Cd(II) per BG were similar to an L-type, or Langmuir type, with the adsorption forming a monolayer of approximately 0.61 μm, with a qmax of 188.74 mg g−1 and kL of 0.710 L mg−1. Thomas’s model considers that sorption is not limited to a chemical reaction but is controlled by mass transfer at the interface. In the present study, the obtained value of kTh was 0.895 mL h−1 mg−1, reaching a sorption capacity qo of 124.4 mg g−1. For the Yoon–Nelson model, it was possible to obtain two important parameters to describe the behavior of the column, the rate constant (kYN), obtaining a value of 0.09 h−1 and an τ of 82.12 h corresponding to the time required for sorption to occur of 50% of the solute in the rupture curve. X-ray diffraction and scanning electron microscopy analyses coupled to the X-ray dispersive energy system (SEM/EDS) of the BG after the Cd(II) ion sorption tests evidenced the formation of crystals with the prevalence of a new mineral phase (otavite).

3 October 2016 in Revista Eletrônica TECCEN
Verified
Journal Article
Open access
PDF file
JSJuliana Francisco Souza
Juliana Francisco Souza
MNMiguel Rascado Fraguas Neto
Miguel Rascado Fraguas Neto
MSMarco Antonio Soares Souza
Marco Antonio Soares Souza
DVDiego Macedo Veneu
Diego Macedo Veneu
Este trabalho analisa a viabilidade de um sistema de captação e reuso de água de chuva no campus da Universidade Severino Sombra. O índice pluviométrico anual médio foi de 1329,9 mm. O consumo de água potável médio mensal foi de 468,9 m³, correspondendo a um custo médio de R$ 4.478,00. Para o dimensionamento do reservatório foram utilizados três métodos: Azevedo Neto, Rippl e Interação. Foram obtidos volumes de reservatório de 71, 142, 215, 285 e 355 m3 pelo Método Interativo e custos totais de implantação de R$ 63.694,71; R$ 86.997,90; R$ 110.027,79; R$ 131.218,97 e R$ 131.218,97, com tempos de retorno de aproximadamente 7,8; 5,3; 4,5; 4,0 e 3,8 anos levando em consideração os percentuais de aproveitamento de 10, 20, 30, 40 e 50%, respectivamente.

10 May 2023 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
DVDiego Macedo Veneu
Diego Macedo Veneu
GSGabriel Gonçalves Amaral Silva
Gabriel Gonçalves Amaral Silva
ANAlexandre Lioi Nascentes
Alexandre Lioi Nascentes
CMCristiane Ribeiro Mauad
Cristiane Ribeiro Mauad
LYLídia Yokoyama
Lídia Yokoyama
DCDavid Villas Boas de Campos
David Villas Boas de Campos

8 April 2014 in Engevista
Verified
Journal Article
Closed access
PDF file
FSFelipe Sombra Santos
Felipe Sombra Santos
SOSuzana Morais de Oliveira
Suzana Morais de Oliveira
DVDiego Macedo Veneu
Diego Macedo Veneu
MCMagali Cammarota
Magali Cammarota
LYLídia Yokoyama
Lídia Yokoyama
Um determinado tipo de efluente de uma indústria petroquímica foi avaliado neste estudo para aplicação em um processo de coagulação, utilizando os coagulantes FeCl3, Al2(SO4)3 e policloreto de alumínio (PAC) no processo de coagulação. Além desses, um polímero aniônico (Magnafloc), também foi utilizado. Durante os ensaios de coagulação/floculação, conduzidos em Jar test, os melhores resultados obtidos com adição de FeCl3 foram alcançados em uma concentração de 300 mg/L no valor de pH igual a 9,0, na presença ou não de Magnafloc na concentração de 1,5 mg/L. Sob estas condições obteve-se uma remoção de turbidez de 90% e 92,8%, e de óleo e graxas de 91,6% e 86,8%. Já ao utilizar o Al2(SO4)3, os melhores resultados foram alcançados a uma concentração de 300 mg/L em valor de pH igual a 9,0, também na presença ou não do polímero Magnafloc a uma concentração de 1,0 mg/L. Nestes ensaios a remoção de turbidez foi de 93,5% e 97,3%, enquanto que a de óleo e graxas foi de 91,5% e 93,3%. Ao adicionar o PAC, em uma concentração de 150 mg/L e no valor de pH igual a 8,0, sem e com adição de Magnafloc na concentração de 1,0 mg/L, os resultados apresentados foram 96,5% e 98,2% na remoção de turbidez, e 91,2% e 95% na remoção de óleos e graxas. Após a realização de todos os ensaios, concluiu-se que para este determinado tipo de efluente, o PAC (150 mg/L), em pH 8,0 e na presença do polímero aniônico Magnafloc (1,0 mg/L) se apresentou como a melhor escolha para o tratamento, por promover a melhor remoção de turbidez e óleos e graxas.

13 January 2023 in Research Square
Verified
Preprint
Open access
PDF file
DVDiego Macedo Veneu
Diego Macedo Veneu
GSGabriel Gonçalves Amaral Silva
Gabriel Gonçalves Amaral Silva
ANAlexandre Lioi Nascentes
Alexandre Lioi Nascentes
CMCristiane Ribeiro Mauad
Cristiane Ribeiro Mauad
LYLídia Yokoyama
Lídia Yokoyama
DCDavid Villas Boas de Campos
David Villas Boas de Campos
Against of the growing world demand for food and the possibility of recovering some nutrients, this work focused on the evaluation of the use of Bioclastic Granules (BG) from the algae Lithothamnium calcareum as sorbent material for the removal/recovery of phosphorus from aqueous solutions. The main variables that affect the sorption process, such as pH, initial concentration of phosphate and GB, as well as the contact time were evaluated. The effect of pH was very significant, obtaining the best results of PO4 removal at pH 5. In the coarser granulometric fractions (+106 -150 and +210 -300 µm) the best removals were observed (around 75%). Regarding the initial PO4 concentration in the solutions, the highest removal (in the range of 74 to 78%) was observed in the lowest concentrations (5 to 70 mg L-1) and the best uptake (10 to 14 mg g-1) at higher concentrations (200 to 420 mg L-1). The PO4 sorption data fitted the Freundlich model well, with kF of 1.35 L mg-1 and n of 2.43. Using the Langmuir model, a qmax of 14.35 mg g-1 was obtained. Regarding the sorption data over time, a better fit to the pseudo-first order kinetic model was observed, obtaining a calculated qeq of 6.56 mg g-1 and a k1 of 0.0073 min-1. The incorporation of PO4 ions in the GB structure was confirmed through the characterization results before and after the sorption experiments using X-ray fluorescence (FRX) and scanning electron microscopy (SEM) techniques.

1 February 2015
Verified
Conference Paper
Open access
PDF file
DVDiego Macedo Veneu
Diego Macedo Veneu
BBB. B. Barbosa
B. B. Barbosa
DOD. Oliveira
D. Oliveira
CMC. R. Mauad
C. R. Mauad
DCD. V. B. Campos
D. V. B. Campos
AIA. O. Izolani
A. O. Izolani
Neste trabalho, foi avaliado o potencial do lodo proveniente de um decantador primário de um sistema de tratamento de efluentes de lodos ativados em uma indús...