The spreading of the water droplets falling on surfaces with a contact angle from 0 to 160° was investigated in this work. Superhydrophilicity of the surface is achieved by laser treatment, and hydrophobization is then achieved by applying a fluoropolymer coating of different thicknesses. The chosen approach makes it possible to obtain surfaces with different wettability, but with the same morphology. The parameter t* corresponding to the time when the capillary wave reaches the droplet apex is established. It is shown that for earlier time moments, the droplet height change does not depend on the type of used substrate. A comparison with the data of other authors is made and it is shown that the motion of the contact line on the surface weakly depends on the type of the used structure if its characteristic size is less than 10 μm.

Research in the field of the evaporation of liquid droplets placed on surfaces with special wetting properties such as biphilic surfaces is of great importance. This paper presents the results of an experimental study of the heat and mass transfer of a water droplet during its evaporation depending on the direction of the gravitational force. A special technique was developed to create unique substrates, which were used to physically simulate the interaction of liquid droplets with the surface at any angle of inclination to the horizontal. It was found that the suspended and sessile droplets exhibited fundamentally different evaporation dynamics. It was shown that the suspended droplets had a higher temperature and, at the same time, evaporated almost 30% faster.