Pentamode metamaterial (PM) has enormous application potential in the design of lightweight bodies with superior vibration and noise-reduction performance. To offer systematic insights into the investigation of PMs, this paper studies the various effects (i.e., unit cell arrangement, material, and geometry) on bandgap properties through the finite element method (FEM). With regards to the influences of unit cell arrangements on bandgap properties, the results show that the PM with triangular cell arrangement (PMT) possesses better bandgap properties than the others. The effects of material and geometry on bandgap properties are then explored thoroughly. In light of the spring-mass system theory, the regulation mechanism of bandgap properties is discussed. Multi-objective optimization is conducted to further enhance the bandgap properties of PMT. Based on the Latin hypercube design and double-points infilling, a high-accuracy Kriging model, which represents the relationship between the phononic bandgap (PBG), single mode phononic bandgap (SPBG), double-cone width, and node radius, is established to seek the Pareto optimal solution sets, using the non-dominated sorting genetic algorithm (NSGA-II). A fitness function is then employed to obtain the final compromise solution. The PBG and total bandgap of PMT are widened approximately 2.2 and 0.27 times, respectively, while the SPBG is narrowed by about 0.51 times. The research offers important understanding for the investigation of PM with superior acoustic regulation capacity.
In traffic accidents, elderly individuals face a significantly higher risk of mortality compared with other age groups. To investigate the factors contributing to elderly pedestrian accidents and their impact on injury severity, 1420 motor vehicle/elderly pedestrian collisions from the 2019–2023 Chinese Traffic Accident Deep Investigation Database were analyzed using the FP-growth algorithm. This analysis identified 5594 association rules across 28 types of variables within 4 categories of influencing factors. Logistic regression results indicate that pedestrian age, collision speed, time of occurrence, and accident location are significant factors affecting the mortality rate of elderly pedestrians in traffic accidents. Specifically, pedestrian age and collision speed significantly influence mortality rates. As collision speed increases, the mortality rate rises markedly. For elderly pedestrians aged 60 and above, the mortality rate increases by 3.7% with each additional year of age. Moreover, accidents occurring at night, in suburban areas, or in villages are associated with a higher mortality rate. This study offers scientific support for the formulation of safety measures aimed at improving the traffic safety of elderly pedestrians.
Pentamode metamaterials (PM) have a promising application in noise reduction fields. In this paper, in order to improve the acoustic modulation capability of PMs, several novel curve PMs are proposed by replacing the straight sides of conventional PMs with curves. At first, the elliptic PMs (EPMs) with various unit cell arrangements (i.e., triangular, square, and hexagonal) are designed, respectively, and their bandgap properties are studied numerically in detail. The EPM with hexagonal unit cell arrangement (EPMH) presents better comprehensive bandgap properties in the EPMs. Subsequently, sinusoidal and power curves are introduced into the EPMH respectively to explore the influences of curve types on bandgap properties. The results show that the bandgap properties improvement of EPMH is higher in comparison with introducing other curves, and the reasons behind these improvements are carefully disclosed in combination with the spring-mass system. Finally, to further improve the bandgap properties of EPMH, a high accuracy Kriging model is constructed according to both the Latin hypercube design and double-point infilling. The Pareto optimal solution sets are determined using a non-dominated sorting genetic algorithm (NSGA-II), and the final compromise solution is gained by employing a fitness function. The bandwidths of phononic bandgap and single mode bandgap, and the total bandwidth of optimized EPMH are increased respectively by about 114.5, 4.3, and 7.7 times than those of the conventional straight side PMs. This investigation provides a fresh strategy for designing PMs with excellent bandgap properties.
18 August 2024 in Mechanics of Advanced Materials and Structures
Lightweight design is universally recognized as a critical criterion for many engineering problems. In addition to the well-developed topology optimization (TO) method, structural bionics is also considered an effective approach to developing innovative structure designs with lightweight. In the process of natural evolution, bamboo has developed a unique hollow structure with ingenious mechanical properties. Inspired by these characteristics, this paper selected bamboo as a bionic prototype to carry out bionic structure optimization of guide arm. First, the initial guide arm was modeled and simulated for its mechanical behavior. Secondly, similarity analysis between bamboo and guide arm was performed from three aspects, and the parametric bionic guide arm model was established step by step. Then, the key parameters affecting the performance of the bionic guide arm were verified by the parameter sensitivity analysis method. The multi-objective optimization was carried out with the minimum of the total mass and the maximum deformation of guide arm as the optimization objectives. The optimal solution of Pareto solution set was determined by multi-objective decision methods of the Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) and Gray Relational Analysis (GRA). Finally, finite element (FE) method was used to make a comparison between the initial model and the optimal bionic model in terms of mechanical performance. According to the results, under the premise of the mass of the optimized bionic model decreased by 17.44%, the maximum deformation was decreased by 9.24%, the equivalent stress was decreased by 17.33%, and the first-order frequency was increased by 22.92%. Comparison results showed that the proposed bionic model provided the best lightweight solution for guide arm. This study reveals that structural bionics provides a new solution for the lightweight design of guide arm and similar beam structural components.