The aim of this study was to compare the repeatability of optical coherence tomography angiography (OCT-A) measurements of macular vessel density using four OCT-A systems, including Heidelberg Spectralis HRA, Optovue RTVue XR, Zeiss Cirrus HD-OCT 5000, and Topcon DRI OCT Triton. A cross-sectional design was used for this study. The vascular density and vascular length density of the superficial and deep retinal capillary plexuses were imaged with OCT-A using 3 mm and 6 mm scan patterns and were calculated using ImageJ. Comparisons of intraclass correlation coefficients (ICC) were conducted. We found that the OCT-A systems had various levels of repeatability. Zeiss had better repeatability for vessel density than the other systems (overall ICC = 0.936). Optovue had better repeatability for vessel length density when the 6 mm scan pattern was used (ICC = 0.680 and 0.700 for retinal superficial and deep capillary plexus, respectively). We concluded that repeatability varied when different scan patterns of various OCT-A systems were used for imaging the superficial retinal and deep capillary plexuses. Results should be seen as valid only for a given method. The repeatability of various OCT-A systems should be considered in clinical practice and in clinical trials that use OCT-A metrics as outcome measures.
21 April 2023 in IEEE Transactions on Intelligent Transportation Systems
Suspension systems are significant for safe and comfort operation of high-speed trains. Health assessment is a useful tool to schedule maintenance plans of suspension systems, and furthermore ensure safety operation of high-speed railway transportation. In real operating condition, two problems, i.e. data imbalance and shortage of labelled data, result in difficult for health assessment of the suspension system using deep learning. In this work, a multi-sensor information fusion method, called as multi-sensor graph transfer network (MSGTN), is proposed in basis of deep transfer learning and graph neural network. In the proposed method, a domain-share multi-sensor graph neural network (MSGNN) is firstly proposed to extract features from vibration signals collected from three different positions in train vehicles. A graph-based fusion layer in MSGNN is proposed to fuse multi-sensor information by combining frequency response curves of the suspension system. The MSGTN mainly includes two parts in source and target domains respectively. In the source domain, a simple physical dynamic model of high-speed rail suspension system is built to generate labelled simulation datasets to pre-train MSGNN. In the target domain, the initial hyper-parameters of MSGNN are that of the pre-train model in the source domain. The labelled data in the target domain is fed to fine-tune MSGNN and then the final model for health assessment can be obtained by minimizing the loss function. The effectiveness of the proposed method was verified using real-work operation data.
Bearing faults are one kind of primary failure in rotatory machines. To avoid economic loss and casualties, it is important to diagnose bearing faults accurately. Vibration-based monitoring technology is widely used to detect bearing faults. Graph signal processing methods promising for the extraction of the fault features of bearings. In this work, graph multi-scale permutation entropy (MPEG) is proposed for bearing fault diagnosis. In the proposed method, the vibration signal is first transformed into a visibility graph. Secondly, a graph coarsening method is used to generate coarse graphs with different reduced sizes. Thirdly, the graph’s permutation entropy is calculated to obtain bearing fault features. Finally, a support vector machine (SVM) is applied for fault feature classification. To verify the effectiveness of the proposed method, open-source and laboratory data are used to compare conventional entropies and other graph entropies. Experimental results show that the proposed method has higher accuracy and better robustness and de-noising ability.
13 August 2024 in Transportation Research Part D: Transport and Environment
Defective droppers pose a significant threat to the performance of the contact between the train pantograph and railway catenary. In this paper, the impact of damaged droppers on the performance of pantograph–catenary interaction behaviour is analysed, and the impact of varying degrees of damage to each dropper is labelled. To improve the classification accuracy when both the damage degree and position are considered, a model integrating multiple 1D CNNs is proposed. Approaches including randomly searching the optimal hyper-parameters and K-fold cross-validation are used to prevent overfitting and to ensure model performance regardless of the training data subset selected. Compared with a conventional 1D CNN, the classification performance of the integrated method is demonstrated using the metrics accuracy, F1-score, precision and recall. It is concluded that, through the use of the integrated 1D CNN, damaged droppers can be detected and localised based on the pantograph–catenary contact force. Hence, intelligent catenary inspection can be enhanced.
Variational Mode Decomposition (VMD) is widely used for inspection purposes. The initial parameters are usually set manually, which is a limitation of this technique. In this paper, a method to automatically select these parameters through a combination of Singular Value Decomposition (SVD) and Improved-VMD (IVMD) is proposed. VMD is applied multiple times with a varying K-value parameter. The original signal and its sub-signals arising from VMD decomposition are all subjected to SVD. An index representing the relevance between sub-signals and the original signal is obtained by comparing eigenvalues, which are calculated by SVD. The result shows the effectiveness of VMD with different initial K-value parameters. SVD is then further applied to the VMD result for the selected K-value parameter to obtain Shannon entropy, which can be used in the detection and classification of corrosion on the underside of the rail. Comparing with current energy-based methods, the Shannon entropy obtained by IVMD–SVD has the advantage of reducing environmental interference to obtain more uniform energy results. The proposed method can improve the effectiveness of VMD for the impact response signal. The classification of underside corrosion of rails can be realised according to the results obtained from the proposed method.