In the present work, two large eddy simulations (LESs) of single isothermal jets discharging into large enclosure facilities are proposed. The geometries and tested flow conditions correspond to scaled experiments of the upper plenum of high-temperature gas-cooled reactors. More specifically, two reference experiments were conducted at Texas A&M University and Michigan University. The objective of the present work is to validate these simulations with their corresponding reference experiments. The proposed LES models are performed with NekRS, a spectral element code with graphics processing unit capabilities developed at Argonne National Laboratory. These simulations were performed on the Summit supercomputer at Oak Ridge National Laboratory. For validation purposes, first- and second-order statistics from the computational fluid dynamics (CFD) calculation are compared with measurements obtained from the experiments. The models proved to be accurate, as these results are in good agreement. Additionally, flow visualization is provided showing that these models are able to retrieve similar effects to what are described in the literature for this type of flow configuration. Finally, the proposed models are part of a broader effort under the current Integrated Research Project of Nuclear Energy Advanced Modeling and Simulation 1.1, whose main objective is to deliver fast-running models to accurately predict complex physical phenomena, including for instance, turbulent mixing and thermal stratification. In this regard, the CFD models proposed here will be used to generate a high-fidelity data set to be applied in conjunction with data-driven methods to improve turbulence modeling closures.
Measuring the flow rate in High-Temperature Gas-cooled Reactors is a challenge for traditional flowmeters due to the high flow rate (10 to 15 m/s at nominal operating conditions), high operating temperatures (>700°C), and high neutron flux and gamma fields in the reactor core. This paper discusses developing a novel flowmeter that can work under these extreme conditions. Oak Ridge National Laboratory first proposed using acoustics to measure the flow in the reactor, more specifically, using a Kelvin-Helmholtz resonator to correlate the gas flow rate with vibration frequency. With the primary goal of developing an acoustic measurement technique, we propose an acoustic corrugated pipe as a candidate for the development of a novel gas flowmeter. Experimental investigations on corrugated pipes have confirmed the dependence of the whistling frequency on the gas flow rate. Also, a tube-in-tube configuration is proposed for the flowmeter prototype, which can help mitigate resonance between the system and the flowmeter. Experimental investigation using the prototype has shown good independence from the piping system. Furthermore, Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations have been performed and validated with a satisfactory agreement, providing confidence that URANS models can adequately predict the characteristic curve (flow rate versus frequency) of the corrugated pipe and can therefore be used to optimize the flowmeter designs cost-effectively.