A 263 GHz continuous-wave (CW) gyrotron was developed at the IAP RAS for future applications as a microwave power source in Dynamic Nuclear Polarization / Nuclear magnetic resonance (DNP/NMR) spectrometers. A new experimental facility with a computerized control was built to test this and subsequent gyrotrons. We obtained the maximum CW power up to 1 kW in the 15 kV/0.4 A operation regime. The power about 10 W, which is sufficient for many spectroscopic applications, was realized in the low current 14 kV/0.02 A regime. The possibility of frequency tuning by variation of the coolant temperature about 4 MHz/1 °C was demonstrated. The spectral width of the gyrotron radiation was about 10⁻⁶.

A 250 GHz continuous-wave (CW) gyrotron has been developed at the IAP RAS jointly with GYCOM Ltd., as a prototype of the microwave source for the envisaged prospective nuclear fusion power plants (DEMO). The main applications of such a tube are electron cyclotron resonance heating and electron cyclotron resonance current drive of magnetically confined plasma as well as its diagnostics based on collective Thomson scattering in various reactors for controlled thermonuclear fusion (e.g., tokamaks and stellarators). The results of the preliminary experimental tests in a pulsed mode of operation are presented. The microwave power of up to 330 kW with an efficiency of 30% without collector depression was obtained. At an accelerating voltage of 55 kV and an electron beam current of 12.5 A (which corresponds to the design parameters for CW operation), the measured output power was about 200 kW. The TEM₀₀ mode content evaluated at the tube output is not less than 98.6%.

To cover the so-called terahertz gap in powerful sources of coherent electromagnetic waves, a second-harmonic gyrotron operating in a 10 T liquid helium-free superconducting magnet has been designed, manufactured, and tested. With an operating voltage of 15 kV and a beam current of 0.6 A, the gyrotron generated coherent continuous-wave radiation at a frequency of 0.526 Terahertz with an output power of 250 Watts and an efficiency of 2.7%.

Novel additive technology of the Chemical Metallization of Photopolymer-based Structures (CMPS) is under active elaboration currently at the IAP RAS (Nizhny Novgorod). The use of this technology has made it possible to implement components of electron–optical and electrodynamic systems for high-power microwave vacuum tubes, such as a gyrotron and a relativistic Cherenkov maser, the design and experimental studies of which are described in this paper. Within the framework of the gyrotron developments, we carried out a simulation of the distribution of the heat load on the collector of high-power technological gyrotron taking into account secondary emission. The prospect of a significant reduction in the maximum power density of the deposited electron beam was shown. The experimental study of the gyrotron collector module manufactured using CMPS technology demonstrated high potential for its further implementation. Recent results of theoretical and experimental studies of a spatially extended Ka-band Cherenkov maser are presented. In this oscillator, the 2D-periodical slow-wave structure made by the proposed technology was applied and a narrow-band generation regime was observed with a sub-GW power level. The design and simulations of a novel selective electrodynamic system for a high-harmonic gyrotron with the planned application of the CMPS technology are discussed.

A pulse magnetic-field generator producing pulse amplitudes up to 50 T with base durations of unities of milliseconds is described. The pulse magnetic field is obtained during discharging a...