The development of an excellent, bioabsorbable hemostatic material for deep wound remains a challenge. In this work, a biodegradable cotton-like biomimetic fibrous mat of poly (l-lactic acid) (PLLA) was made by melt spinning. Subsequently, SD composite was prepared by cross-linking sodium alginate (SA) with dopamine (DA). It was immobilized on the fibre surface, which inspired by mussel byssus. Finally, Fe3+ was loaded onto the 0.5SD/PLLA composite by chelation with the carboxyl of alginate and phenolic hydroxy of dopamine. The haemostasis experiment found that the hemostatic time 47 s in vitro. However, the bleeding volume was 0.097 g and hemostatic time was 23 s when 20Fe3+-0.5SD/PLLA was applied in the haemostasis of the rat liver. As a result of its robust hydrophilicity and bouffant cotton-like structure, it could absorb a large water from blood, which could concentrate the component of blood and reduce the clotting time. Furthermore, the addition of Fe3+ in the 0.5SD/PLLA had a significant effect on improve hemostatic property. It also displayed excellent antibacterial property for Escherichia coli and Staphylococcus aureus. Notably, it possesses superior hemocompatibility, cytocompatibility and histocompatibility. Hence, 20Fe3+-0.5SD/PLLA has high potential application in haemostasis for clinical settings due to its outstanding properties.
27 February 2020 in Journal of Materials Chemistry B
An effective treatment for spinal cord injury (SCI) remains a severe clinical challenge due to the intrinsically limited regenerative capacity and complex anatomical structure of the spinal cord. The combination of biomaterials, which serve as scaffolds for axonal growth, cells and neurotrophic factors, is an excellent candidate for spinal cord regeneration. Herein, a new micropatterned conductive electrospun nanofiber mesh was constructed with poly{[aniline tetramer methacrylamide]-co-[dopamine methacrylamide]-co-[poly(ethylene glycol) methyl ether methacrylate]}/PCL (PCAT) using a rotation electrospinning technology. The aim was to study the synergistic effects of electrical stimulation (ES) and a micropatterned conductive electrospun nanofiber mesh incorporated with nerve growth factor (NGF) on the differentiation of rat nerve stem cells (NSCs). The hydrophilicity of the conductive nanofiber mesh could be tailored by changing the dopamine (DA) and aniline tetramer (AT) content from 19° to 79°. A favorable electroactivity and conductivity was achieved by the AT segment of PCAT. The as-fabricated micropatterned electrospun nanofiber mesh possessed a regularly aligned valley and ridge structure, and the diameter of the nanofiber was 312 ± 58 nm, while the width of the valley and ridge was measured to be 210 ± 17 μm and 200 ± 16 μm, respectively. The growth and neurite outgrowth of differentiated NSCs were observed along the valley of the micropatterned nanofiber mesh. In addition, the NGF loaded micropatterned conductive electrospun nanofiber mesh combined with ES exhibited the highest cell viability, and effectively facilitated the differentiation of NSCs into neurons and suppressed the formation of astrocytes, thus exhibiting a great application potential for nerve tissue engineering.