The safety of lithium-ion batteries is critical to the safety of battery electric vehicles (BEVs). The purpose of this work is to develop a method to predict battery thermal runaway in full electric vehicle crash simulation. The thermal–electrical–mechanical-coupled finite element analysis is used to model an individual lithium-ion battery cell, a battery module, a battery pack, and a battery electric vehicle with 24 battery modules in a live circuit connection. The lithium-ion battery is modeled using a representative approach, with each internal battery component individually modeled to represent its geometric shape and realistic thermal, mechanical, and electrical properties. A resistance heating solver and Randles circuit model built with a generalized voltage source are used to simulate the electrical behavior of the battery. The thermal simulation of the battery considers the heat capacity and thermal conductivity of different cell components, as well as heat conduction, radiation, and convection at their interfaces. The mechanical property of battery cell and battery module models is validated using spherical punch tests. The electrical property of the battery cell and battery module models is verified against CircuitLab simulation in an external short-circuit test. The simulation results for the battery module’s internal resistance are consistent with both experimental data and literature values. The multi-physics coupling phenomenon is demonstrated with a cylindrical compression simulation on the battery module. The multi-physics BEV model with 24 live battery modules is used to simulate the external short-circuit test and the side pole impact test. The simulation run time is less than 24 h. The results demonstrated the feasibility of using a representative battery model and multi-physics analysis to predict battery thermal runaway in full electric vehicle crash analysis.
11 August 2022 in Journal of Engineering Materials and Technology
This paper investigates the influence of stress state on the equivalent plastic fracture strain in 2024-T351 aluminum alloy. Eighteen unique stress states at failure—with triaxialities ranging from 0.388 (compressive) to −0.891 (tensile) and Lode parameters ranging from −0.978 to 1.000—are explored through mechanical experiments on 2024-T351 aluminum specimens with various geometries under multiple loading conditions. These include tension tests of plane stress (thin), plane strain (thick), and axisymmetric specimens, as well as pure shear and combined axial–torsional loading on thin-walled tubes. Using a hybrid numerical–experimental approach, the dependence of fracture strain on stress triaxiality and Lode parameter is quantified for each experiment. Fracture strains are measured using three-dimensional digital image correlation. Equivalent plastic fracture strain for 2024-T351 generally increases with stress triaxiality (moving toward a more compressive state). Fracture strain decreases modestly as the Lode parameter decreases from 1 to 0, although there is a significant increase in ductility as the Lode parameter decreases below −0.8. Compression–torsion tests extend the data’s stress-space coverage well into the compressive triaxiality region (up to 0.388) and to Lode parameters approaching −1. This experimental program provides the most extensive set of ductile fracture data from a single 12.7-mm-thick 2024-T351 aluminum plate in the literature. These data can be used to calibrate ductile fracture models used in finite element simulations of dynamic events such as bird strikes, automotive collisions, and debris containment.
This work investigates temperature’s effect on the critical energy release rate using damage mechanics material models and the element deletion method. The energy release rate describes the decrease in total potential energy per increase in crack surface area. The critical energy release rate is widely used as the failure criterion for various elastic and plastic materials. In real-life scenarios, fractures may occur at different temperatures. The temperature dependency of the critical energy release rate for aluminum 2024-T351 and titanium Ti-6Al-4V is studied in this work. We utilized test-data-based advanced material models of these two alloys, considering the strain rate, temperature, and state of stress for plasticity and failure. These material models are used to simulate a three-dimensional fracture specimen to find the critical energy release rate at different temperatures. A new method to calculate the critical energy release rate with the element deletion method is introduced and verified with the virtual crack opening method. This method enables the calculation of the energy release rate in a classical damage mechanics simulation for dynamic cack propagation. The simulation result indicates that the critical energy release rate increases with rising temperatures for these alloys.
The safety of lithium-ion batteries is critical to the safety of battery electric vehicles (BEVs). The purpose of this work is to develop a method to predict battery thermal runaway in full electric vehicle crash simulation. The thermal-electrical-mechanical coupled finite element analysis is used to model an individual lithium-ion battery cell, a battery module, a battery pack, and a battery electric vehicle with 24 battery modules in a live circuit connection. The lithium-ion battery is modeled using a representative approach, with each battery internal component individually modeled to represent its geometric shape and realistic thermal, mechanical, and electrical properties. A resistance heating solver and Randles circuit model built with generalized voltage source are used to simulate the battery electrical behavior. The thermal simulation of the battery accounts for the heat capacity and thermal conductivity of various cell component materials, as well as heat conduction, radiation, and convection at their interfaces. The mechanical property of battery cell and battery module models is validated using spherical punch tests. The electrical property of the battery cell and battery module models is verified against CircuitLab simulation in an external short circuit test. The simulation result of battery module’s internal resistance agrees with the experimental data and the literature value. The multi-physics coupling phenomenon is demonstrated with a cylindrical compression simulation on the battery module. The multi-physics BEV model with 24 live battery modules is used to simulate the external short-circuit test and the side pole impact test. The simulations run time is less than 24 hours. The results demonstrated the feasibility of using representative battery model and multi-physics analysis to predict battery thermal runaway in full electric vehicle crash analysis.
Constitutive modeling in plasticity is a critical topic in solid mechanics. However, modeling nonlinear plasticity remains a challenge due to the theoretical complexity in representing realistic material behavior. This work aims to develop a general material model based on a rational polynomial function for plasticity and to use Bayesian optimization to identify its parameters. As a data-driven approach, Bayesian optimization effectively estimates model parameters for a high-computational-cost model. In this work, automotive structural steel is selected as a representative example to benchmark the proposed approach. Our results demonstrate that the rational polynomial function effectively models the plasticity behavior for metallic alloy before the failure point, and Bayesian optimization successfully estimates the parameters. This novel framework also has the potential to be applied to other materials, whose constitutive models can be defined by stress–strain curves.
1 January 2012 in Transportation Research Record: Journal of the Transportation Research Board
The National Crash Analysis Center (NCAC) at the George Washington University simulated the crash of a 2,270-kg Chevrolet Silverado pickup truck into a standard 32-in. New Jersey shape concrete barrier under the requirements of Test 3–11 of the Manual for Assessing Safety Hardware (MASH). The new, detailed finite element (FE) model for the Chevrolet Silverado was used as the surrogate for the MASH 2270P test vehicle. An FE model of the New Jersey barrier was drawn from the array of NCAC hardware models. The primary objective of this analysis was to simulate the crash test conducted to evaluate how this commonly used, NCHRP 350–approved device would perform under the more rigorous MASH crashworthiness criteria. A secondary objective was to use newly developed verification and validation (V&V) procedures to compare the results of the detailed simulation with the results of crash tests undertaken as part of another project. The crash simulation was successfully executed with the detailed Silverado FE model and NCAC models of the New Jersey concrete barrier. Traditional comparisons of the simulation results and the data derived from the crash test suggested that the modeling provided viable results. Further comparisons employing the V&V procedures provided a structured assessment across multiple factors reflected in the phenomena importance ranking table. Statistical measures of the accuracy of the test in comparison with simulation results provided a more robust validation than previous approaches. These comparisons further confirmed that the model was able to replicate impacts with a 2270P vehicle, as required by MASH.