All types of concrete contain residual unhydrated cement. For example, unhydrated cement is present in high-strength concrete due to low water/cement ratios, as well as in old concrete due to coarser cement used in the past, and in fresh concrete waste due to the lack of curing. These residues of unhydrated cement are a waste of resources with potential for recovery and reuse. In this work, X-ray diffraction, thermogravimetric analysis, and analytical modeling were used to quantify the residual cement and the hydration degree of various cement pastes to explore their recovery potential. The study included cement pastes with water/cement ratios of 0.2–0.6 and residual unhydrated cement was found to be in the range 6–36%, indicating great potential for recovery and further use in the manufacture of new concrete.
There is no consensus on which hydration stoppage method is optimal to preserve the microstructure and mineral composition of samples, especially considering the specific aspects of different testing methods, such as TGA, MIP, or XRD. This paper presents a quantitative comparison between the most popular hydration stoppage strategies and parameters such as the sample piece size, the soaking time in a solvent, and the type, as examined on cement paste hydrated for 7 days. It was found that the carbonation appears either for samples smaller than 2.36 mm and bigger than 4.75 mm or samples soaked in a solvent for longer than 1 h. Fast solvent replacement leads to ettringite diminution and total pore volume increase. Among others, solvent replacement with subsequent gentle heating under a vacuum was found to be the most efficient, whereas it was experimentally demonstrated that isopropyl alcohol stops hydration faster than ethanol and acetone.