Runhu Zhang

Dr. Runhu Zhang


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 January 2017 in Water Science & Technology
Verified
Journal Article
Closed access
PDF file
PZPeng Zhao
Peng Zhao
RZRunhu Zhang
Runhu Zhang
JWJianglin Wang
Jianglin Wang
A novel chitosan/diatomite composite was prepared by a simple mixture in the mass ratio to remove methyl orange (MO) from aqueous media in this study. The composite adsorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy analysis. The parameters to influence the adsorption of MO were studied under such conditions as kinetics, adsorption isotherm, pH effect, and thermodynamics. The results revealed that adsorption of MO was initially rapid and the equilibrium time was reached after 40 min. The optimal value of the pH was 5.0 for better adsorption. The equilibrium data were well fitted to the Langmuir isotherm compared to the Freundlich isotherm, and exhibited the highest capacity and a removal rate of 88.37% under an initial dye concentration of 50 mg/L. The kinetic data were well described by the pseudo-second order model. The thermodynamic calculations revealed that the sorption was viable, spontaneous, and exothermic under the conditions studied. In addition, the chitosan/diatomite composite had good adsorption and desorption performance with respect to reusability after six cycles. These results showed that the chitosan/diatomite could be considered as a potential adsorbent for the removal of MO in aqueous solution.

1 February 2017 in Chinese Journal of Chemical Engineering
Verified
Journal Article
Closed access
CHChao Hua
Chao Hua
RZRunhu Zhang
Runhu Zhang
FBFang Bai
Fang Bai
PLPing Lu
Ping Lu
XLXiangfeng Liang
Xiangfeng Liang

12 December 2016 in Catalysts
Verified
Journal Article
Open access
PDF file
RZRunhu Zhang
Runhu Zhang
CHChao Hua
Chao Hua
BWBingshuai Wang
Bingshuai Wang
YJYan Jiang
Yan Jiang
Cu–Zn/γ–Al2O3 catalysts were prepared by the impregnation method. Catalytic activity was evaluated for N2O decomposition in a fixed bed reactor. The fresh and used catalysts were characterized by several techniques such as BET surface area, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Cu–Zn/γ–Al2O3 catalysts exhibit high activity and stability for N2O decomposition in mixtures simulating real gas from adipic acid production, containing N2O, O2, NO, CO2, and CO. Over the Cu–Zn/γ–Al2O3 catalysts, 100% of N2O conversion was obtained at about 601 °C at a gas hourly space velocity (GHSV) of 7200 h−1. Cu–Zn/γ–Al2O3 catalysts also exhibited considerably good durability, and no obvious activity loss was observed in the 100 h stability test. The Cu–Zn/γ–Al2O3 catalysts are promising for the abatement of this powerful greenhouse gas in the chemical industry, particularly in adipic acid production.

22 May 2017 in Catalysts
Verified
Journal Article
Open access
PDF file
XZXiaoying Zheng
Xiaoying Zheng
RZRunhu Zhang
Runhu Zhang
FBFang Bai
Fang Bai
CHChao Hua
Chao Hua
The catalytic decomposition of N2O was investigated over Cu-Zn/ZnAl2O4 catalysts in the temperature range of 400–650 °C Catalytic samples have been prepared by wet impregnation method. Prepared catalysts were characterized using several techniques like BET surface area, X-ray diffraction (XRD), and Scanning electron microscopy (SEM). The Cu-Zn/ZnAl2O4 showed higher catalytic performance along with long term stability during N2O decomposition. The Cu-Zn/ZnAl2O4 catalysts yielded 100% N2O conversion at 650 °C. The Cu-Zn/ZnAl2O4 catalysts are promising for decrease this strong greenhouse gas in the chemical industry.

1 February 2013 in Desalination and Water Treatment
Verified
Journal Article
Open access
PWPing Wang
Ping Wang
RZRunhu Zhang
Runhu Zhang
CHChao Hua
Chao Hua
Activated carbon from crofton weed (ACCW) was evaluated for its ability to remove Cr(VI) from aqueous solutions. Batch experiments were used to examine kinetics, adsorption isotherm, pH effect, and thermodynamic parameters. Adsorption data for Cr(VI) uptake by ACCW were analyzed according to Langmuir and Freundlich adsorption models. Thermodynamic parameters for the adsorption system were determinated at 293, 303, and 313 K (ΔH° = 15.02 kJ mol−1; ΔG° = −0.76 to −2.91 kJ mol−1, and ΔS° = 53.85 J K−1 mol−1). The ΔG° values obtained were negative, indicating that the adsorption of Cr(VI) on the surface of ACCW was a spontaneous adsorption process. The kinetics of this process was described very well by a pseudo-second-order rate equation. These results show that the ACCW could be considered as a potential adsorbent for Cr(VI) in aqueous solutions.