The critical modes of the instabilities of viscoelastic Taylor–Couette flow are investigated using both experiments and linear stability analysis when only one cylinder rotates and the other is fixed. A viscoelastic Rayleigh circulation criterion highlights that the elasticity of the polymer solution can induce a flow instability even if the Newtonian counterpart is stable. When the inner cylinder solely rotates, experimental results show three critical modes: stationary axisymmetric vortices or Taylor vortices for small elasticity, standing waves, also called ribbons for intermediate values of elasticity, and disordered vortices (DV) for large elasticity values. When the outer cylinder rotates and the inner cylinder is fixed and for large values of elasticity, the critical modes appear in the form of DV. There is a good agreement between experimental and theoretical results provided that the elasticity of the polymer solution is accurately determined. This article is part of the theme issue ‘Taylor–Couette and related flows on the centennial of Taylor’s seminal Philosophical Transactions paper (part 2)’.
A solar air heater (SAH) is a simple device that collects solar radiation and transfers it to the processed air generally used in several thermal engineering applications such as space and industrial process heating and food drying, but its utilization is only during sunny hours. Among the methods of ameliorating its employing to heat air during the off-sunshine period is through the addition of heat storage medium inside the SAH for storing the sun's radiation as thermal energy. The main objective of this experimental study is to predict the effect of the heat storage medium on the thermal performance of SAH. To achieve this goal, three different configurations of SAHs were designed and constructed in the Laboratory of Electro–Mechanic Systems, namely, traditional SAH with natural circulation (T-SAH), SAH with a centrifugal air blower (F-SAH), and SAH with a centrifugal air blower and coupled with an internal heat storage medium (FS-SAH). They were tested and compared under the same ambient conditions of Sfax, central-eastern Tunisia. Experimental results showed that the T-SAH gives higher temperatures than the F-SAH and FS-SAH during the period from 8 a.m. to 3 p.m. From 3 p.m. to 7 p.m., the temperatures of FS-SAH are the highest when compared with the other two SAHs. Through this period, the thermal energy per unit time obtained by FS-SAH, F-SAH, and T-SAH is 2.15 kW, 0.23 kW, and 0.22 kW, respectively. Due to the use of salt water as a heat storage medium, the thermal energy per unit time of FS-SAH is enhanced by 1.92 kW (corresponding to 89.3%) and 1.93 kW (corresponding to 89.77%) higher than the F-SAH and T-SAH, respectively. The FS-SAH offers higher thermal and exergy efficiency as compared to the T-SAH and F-SAH during the same period. The economic evaluation showed that the money saved by FS-SAH is 96% and 89.51% higher than the T-SAH and F-SAH, respectively. Therefore, the employ of salt water as a heat storage medium is a positive attempt to enhance the thermal performance of SAHs during the off-sunshine period of this experimental testing.
This paper investigates mixing of a saline water jet into ambient freshwater at rest in a large basin. Reynolds-averaged Navier–Stokes (RANS) and diffusion-convection equations of the saline water volume fraction are used to model the mixing and the propagation of the saline gravity current jet. The comparison of the numerical and experimental front positions shows good agreement for Reynolds and Richardson numbers varying in the ranges and , respectively. The numerical simulations of the hydrodynamic fields show that the velocity maximum is located at 0.18 , where is the height at which the mean velocity is equal to half the maximum velocity . The local gradient Richardson number shows that maximum turbulent mixing occurs at in the first stage of the gravity current close to the inlet, whereas far from the inlet, the turbulent mixing collapses. The entrainment depends both on the front position and on the values of the isodensity threshold, whereas it is independent of bulk Reynolds and Froude numbers in the narrow ranges ( ; ).
1 January 2017 in International Journal of Engineering and Technology