The experimental study on thermocapillary convection in liquid bridges of large Prandtl number has been carried out on Tiangong-2 in space. The purpose of these experiments is to study the oscillation instability of thermocapillary convection, and to discover and recognize the mechanism of destabilization of thermocapillary convection in the microgravity environment in space. In this paper, the geometry of a half-floating-zone liquid bridge is featured by the aspect ratioArand volume ratioVr, and its influence on critical conditions of oscillatory thermocapillary convection is studied. More than 700 sets of space experiments have been finished. The critical conditions and oscillation characteristics of thermocapillary convection instability in theAr–Vrparameter space have been fully obtained under microgravity conditions for the first time. It is found that theAr–Vrparameter space can be divided into two regions of different critical conditions and oscillation characteristics: the region of low frequency oscillation, and the region of high frequency oscillation. More importantly, we obtain the complete configuration of these two stability neutral curves, and find that the low frequency mode is a ‘’ type curve. Based on this, we discuss the influence of heating rate on the oscillation mode. It is found that the heating rate affects the selection of critical mode, which results in a jump change of critical temperature difference. The findings of this study are helpful to better understand the critical modes and transition processes of thermocapillary convection in liquid bridges with different configurations.

Thermocapillary convection has always been one of the most important research topics in microgravity fluid physics. A space experimental study on the thermocapillary convection in an open annular liquid pool – a typical thermocapillary flow system – has been conducted on the SJ-10 satellite of China. This space experiment has observed the spatial temperature distribution of the liquid free surface using an infrared thermal imager, obtained the flow pattern transition process, analysed the oscillation characteristics and revealed the instability mechanism of themocapillary convection. The shape effects on the flow instability are researched by changing the volume ratio, Vr, which denotes the ratio of the liquid volume to the volume of the cylindrical gap between the walls. The volume ratio effect has been focused on for the first time. For a certain volume ratio, the flow pattern would transform from the steady state to the oscillation state accompanied by directional propagating hydrothermal waves with increasing temperature difference. In addition, the significant influences of the volume ratio on the critical conditions and wavenumber selection have been analysed in detail.

We carried out space experiments on thermocapillary convection in liquid bridges with large Prandtl number in the Tiangong-2 space laboratory, studying the influence of geometrical parameters, including aspect ratio (Ar, height to diameter) and volume ratio (Vr). It is found that there are two modes of temperature oscillation in thermocapillary convection in liquid bridges: low- and high-frequency oscillation, corresponding to different critical temperature difference and geometrical parameters, respectively. In this paper, the geometrical effect on the wave pattern and its transformation in the oscillating thermocapillary flow is studied in detail. Temperature signals from thermocouples on five measuring spots are analyzed to distinguish different oscillation modes corresponding to characteristics of azimuthal waves, such as wave number, traveling wave, and standing wave. Under a small volume ratio, the low-frequency traveling wave mode transits to the high-frequency standing wave mode; under a large volume ratio, the high-frequency standing wave has abundant mode transformations, such as standing wave → traveling wave, standing wave → traveling wave → standing wave, and so on, and the transformation process of the wave mode is sensitive to the aspect ratio.

Spray cooling is an effective solution for high heat flux dissipation challenges. Accurate prediction of heat transfer efficiency by numerical simulation can reduce the cost of spray cooling in engineering applications. To improve the accuracy of numerical simulation, this study develops a mathematical model for droplet collision and heat transfer response based on experimental data. In spray cooling experiments, droplets are sprayed onto a 200 °C aluminum alloy thermal wall using an atomizing nozzle, temperature is monitored, and the curve of heat flux variation during cooling is estimated from temperature data. Analysis of high-speed photography results provides the droplet diameter, velocity, and spatial distribution. We discover that the average Weber number of droplets, We, has a power-law relationship with the volumetric flow rate, Q, as We ∼ Q1.55. The velocity and position of spray droplets approximately follow a normal distribution, while the diameter follows a Log-normal distribution. By analyzing the relation between heat flux and spray distribution, an experimental-data-based model, named Droplet Collision-Associated Heat Transfer Model, is designed. Integrating this experimental-data-based model with the discrete phase model (DPM), the heat transfer evolution process in spray cooling is simulated with high reliability. Particles sources are generated based on the experimentally obtained droplet parameter probability distributions, DPM is used to capture the trajectories of droplets, and the droplet impact heat transfer correlation model calculates the thermal response of the wall. Compared with experimental results, the simulation error is only 7.49%. Simulation results indicate that spray cooling at high flow rates has better temperature uniformity.

In this paper, the coupling effect of multiphysical fields of droplet migration is deeply studied by constructing a physical model of droplet migration with multiphysical fields. Digital holographic interferometry and particle image velocimetry are used to simultaneously measure the temperature and velocity fields of the mother liquor in the process of droplet migration for the first time. Due to the advancements of measuring, the zero-velocity region is also in the region where the thermal wake appears, four vortexes appear in the droplet migration and the off-axis behavior of double-droplet migration is found. The aim of this work is to analyze the coupling relationship of multiphysical fields, so as to reveal the physical laws of thermocapillary migration of single droplet and multiple droplets with the same phase and heterophase and to study the driving mechanism of the thermocapillary force and the flow of the mother liquor.

Cross-zero expansion coefficient Rayleigh–Bénard–Marangoni (CRBM) convection refers to the convective phenomenon where thermal convection with stratified positive and negative expansion coefficients in a liquid layer is coupled with the Marangoni convection. In the Bénard convection, fluids with a cross-zero expansion coefficient contain a neutral expansion layer where the expansion coefficient (α) is zero, and the local buoyancy-driven convection is coupled with the Marangoni convection, leading to unique flow instability phenomena. This paper uses linear stability theory to analyze the CRBM convection in a horizontal liquid layer under a vertical temperature gradient and performs numerical calculations for fluids under different Bond numbers (Bd) in both bottom-heated and bottom-cooled models, obtaining the critical destabilization conditions and modes. In the bottom-heated model, different combinations of buoyancy instability mechanism (BIM), tension instability mechanism, and coupled instability mechanism (CIM) appear depending on the dimensionless temperature for the neutral expansion layer (Tα0) and the Bd. In the bottom-cooled model, two mechanisms occur according to the variation of Tα0: BIM and CIM.