Magnetic-field-induced strand formation of ferromagnetic Fe-Ni nanoparticles in a PMMA-matrix is correlated with the intrinsic material parameters, such as magnetization, particle size, composition, and extrinsic parameters, including magnetic field strength and viscosity. Since various factors can influence strand formation, understanding the composite fabrication process that maintains the strand lengths of Fe-Ni in the generated structures is a fundamental step in predicting the resulting structures. Hence, the critical dimensions of the strands (length, width, spacing, and aspect ratio) are investigated in the experiments and simulated via different intrinsic and extrinsic parameters. Optimal parameters were found by optical microscopy measurements and finite-element simulations using COMSOL for strand formation of Fe50Ni50 nanoparticles. The anisotropic behavior of the aligned strands was successfully characterized through magnetometry measurements. Compared to the unaligned samples, the magnetically aligned strands exhibit enhanced conductivity, increasing the current by a factor of 1000.
In this paper, we investigate the fundamental linkage between underwater electric potential (UEP) signatures and their related electric fields above the waterline, which are introduced as above water electric potential (AEP) signatures. As a first step, the field distribution for an underwater point source excitation (fundamental solution) is derived analytically, using an adjusted method of images. Subsequently a numerical approach is introduced, whereby the calculation of the stationary current density distribution and electrostatic fields are coupled within an FEM simulation. Simulation results are presented for the aforementioned point source, as well as for a submarine model, where the latter includes considering non-linear polarization curves to model the electrochemical behavior at the metal–seawater interface. Finally, the relevance of AEP signatures in the context of anti-submarine warfare (ASW) is discussed. Our results show that AEP signatures inevitably occur along with UEP signatures, and could therefore in principal be used to detect submerged submarines via airborne sensors. However, an estimation of the expectable signal-to-noise-ratio (SNR) suggests that AEP signatures are difficult to exploit and therefore entail a much lower risk compared to other signatures.
The underwater electric potential (UEP) signature is an electric signal, which can be exploited by naval mines to be utilized as a possible trigger indicator and may cause severe damage to the vessel and the onboard crew. Hence, knowing the UEP signature as exactly as possible can help to evaluate a possible risk of the vessel being detected by naval mines or if the UEP signature is within a noncritical region. As the UEP signature differs for changes of the corrosion protection system, the UEP signature is usually unknown for new conditions. In this work, we present a simple mathematical formulation to predict the UEP signature based on the mere use of a single reference UEP signature, and the corresponding currents, which are excited by the impressed current cathodic protection (ICCP) system. With this methodology, deviations below 10% between the maximum of the simulated UEP signature and the predicted UEP signature can be achieved, even in the presence of the nonlinear corrosion process. Furthermore, a corrosion protective coating of the propellers can significantly reduce the influence of the nonlinear corrosion process on the total UEP signature to improve the prediction accuracy of the superposition formulation as presented in this work.
The evaluation of the hull condition of naval vessels is a crucial part for corrosion protection systems due to the direct linkage between the electrochemical process at the hull/water interface leading to corrosion and the overall coating of the hull to prevent the corrosion process. In the case of the latter, the condition is unknown while the vessel is on a mission and either has to be evaluated by divers (in open water) or on dry docks which is a time consuming process, respectively. In our work, we present a methodology to localize coating damages without the need of divers or dry docks using an artificial neural network (ANN) combined with the information provided by the onboard impressed current cathodic protection (ICCP) system to predict said damages in a specific sector of a generic ship model. Using only the ICCP currents as highly aggregated input variables for the ANN, approximately 86 % of randomly sized and positioned coating damages are correctly predicted.
Underwater electric potential (UEP) ship signatures are evaluated at a test site that provides only incoherent data from electric field sensors placed on the seabed. This paper shows how these data sets can be used to extract significant seabed parameters, which are evaluated by a numerical model combined with an optimization process in the frequency range from 1 Hz up to 100 kHz. This is in contrast to the controlled electromagnetic source technology used by geophysicists, which has to track both phase and amplitude, and, therefore, cannot simply be applied to data from per se stationary systems. Using the aforementioned frequency range within COMSOL Multiphysics (v6.0), the finite-element-based simulation software, a sensitivity analysis of seabed parameter behavior within a seabed depth range from 1 m to 20 m is evaluated for the highest sensitivity for each of the measurable field amplitudes of the locally available sensors. From this, the electrical conductivities of two seabed layers and the depth of the first layer can be extracted using a combination of a genetic algorithm and the Nelder–Mead method. In summary, phase information is not required to characterize the stratified seabed, providing a cost-effective approach to obtaining effective environmental conditions for free-water signature calculations.