Gas fermentation processes (using CO2, CO, H2, CH4) have gained significant research and commercial interest in the last years due to their potential for carbon capture and sequestration. The small economic margins of these processes necessitate the use of large-volume bioreactors. For cost-effective gas delivery, we advise using pneumatically agitated bioreactors, like bubble column reactors, compared to traditional stirred-tank reactors. Although scale-up is conventionally done on an empirical and rule-of-thumb basis, rational methods are currently available. The most important one is the knowledge-driven scaling-up approach, wherein (CFD-based) hydrodynamic and kinetic models of large-scale bioreactors guide the design of representative lab-scale experiments. We suggest several future research directions to enhance the predictive capacity of these models and thereby accelerate scaling-up gas fermentation processes.
In large-scale syngas fermentation, strong gradients in dissolved gas (CO, H2) concentrations are very likely to occur due to locally varying mass transfer and convection rates. Using Euler-Lagrangian CFD simulations, we analyzed these gradients in an industrial-scale external-loop gas-lift reactor (EL-GLR) for a wide range of biomass concentrations, considering CO inhibition for both CO and H2 uptake. Lifeline analyses showed that micro-organisms are likely to experience frequent (5 to 30 s) oscillations in dissolved gas concentrations with one order of magnitude. From the lifeline analyses, we developed a conceptual scale-down simulator (stirred-tank reactor with varying stirrer speed) to replicate industrial-scale environmental fluctuations at bench scale. The configuration of the scale-down simulator can be adjusted to match a broad range of environmental fluctuations. Our results suggest a preference for industrial operation at high biomass concentrations, as this would strongly reduce inhibitory effects, provide operational flexibility and enhance the product yield. The peaks in dissolved gas concentration were hypothesized to increase the syngas-to-ethanol yield due to the fast uptake mechanisms in C. autoethanogenum. The proposed scale-down simulator can be used to validate such results and to obtain data for parametrizing lumped kinetic metabolic models that describe such short-term responses.
Syngas fermentation to ethanol has reached industrial production. Further improvement of this process would be aided by quantitative understanding of the i
A Bayesian optimization approach for maximizing the gas conversion rate in an industrial-scale bioreactor for syngas fermentation is presented. We have access to a high-fidelity, computational fluid dynamic (CFD) reactor model and a low-fidelity ideal-mixing-based reactor model. The goal is to maximize the gas conversion rate, with respect to the input variables (e.g., pressure, biomass concentration, gas flow rate). Due to the high cost of the CFD reactor model, a multi-fidelity Bayesian optimization algorithm is adopted to solve the optimization problem using both high and low fidelities. We first describe the problem in the context of syngas fermentation followed by our approach to solving simulator optimization using multiple fidelities. We discuss concerns regarding significant differences in fidelity cost and their impact on fidelity sampling and conclude with a discussion on the integration of real-world fermentation data.
1 September 2026 in Biotechnology and Bioengineering
Autotrophic CO 2 conversion to Single Cell Protein (SCP) using H 2 and O 2 is gaining commercial traction for food and feed production. Cupriavidus necator H16 is a key chassis organism for this “knallgas” fermentation, but industrial operation is typically constrained to ~30°C due to poor autotrophic growth at higher temperatures. Autotrophic growth at 37°C would enable the use of low‐cost cooling water instead of chilled water, offering substantial reduction in cooling expenses. Here, we characterised a spontaneous C. necator mutant that conferred 37°C‐thermotolerance when grown autotrophically, and compared its performance to the wild type. In batch cultures at 30°C, both strains showed comparable growth. At 37°C, only the spontaneous mutant grew autotrophically, albeit with a lower maximum growth rate than at 30°C. In chemostat cultivations no clear phycological differences could be resolved within the experimental uncertainty relative to the wild type at 30°C, in terms of PHB production, CO 2 uptake at 37°C, and proteinogenic amino acid composition. Techno‐economic modelling of a 160 kt a −1 SCP process indicated that operation at 37°C can reduce cooling utility costs up to 75%, saving ~US$ 0.98 per kg SCP (20%–50% of the production costs). Operating at 37°C with thermotolerant strains could subsequently decrease production costs substantially, making CO 2 ‐derived SCP production more economically viable at scale.