Convective drying of porous media is central to many engineering applications, ranging from spray drying over water management in fuel cells to food drying. To improve these processes, a deep understanding of drying phenomena in porous media is crucial. Therefore, detailed simulation of multiphase flows with phase change is of great importance to investigate the complex processes involved in drying porous media. While many studies aim to access the phenomena solely by simulations, here we succeed to compare comprehensively simulations with an experimental methodology based on microfluidic multiphase flow studies in engineered porous media. In this contribution, we propose a Navier–Stokes Cahn–Hilliard model coupled with balance equations for heat and moisture to simulate the two-phase flow with phase change. The phase distribution of the two fluids air and water is modeled by the Phase-Field equation. Comparisons with experiments are rare in the literature and usually involve very simple cases. We compare our simulation with convective drying experiments of porous media. Experimentally, the interface propagation of the water–air interface was visualized in detail during drying in a structured microfluidic cell made from PDMS. The drying pattern and the drying time in the experiment are very well reproduced by our simulation. This validation will enable the application for the presented Navier–Stokes Cahn–Hilliard model in more complex cases focused more on applications, e.g., in the field of fibrous materials.
1 August 2021 in International Journal of Heat and Mass Transfer
Mass transport in textiles is crucial. Knowledge of effective mass transport properties of textiles can be used to improve processes and applications where textiles are used. Mass transfer in knitted and woven fabrics strongly depends on the yarn used. In particular, the permeability and effective diffusion coefficient of yarns are of interest. Correlations are often used to estimate the mass transfer properties of yarns. These correlations commonly assume an ordered distribution, but here we demonstrate that an ordered distribution leads to an overestimation of mass transfer properties. We therefore address the impact of random ordering on the effective diffusivity and permeability of yarns and show that it is important to account for the random arrangement of fibers in order to predict mass transfer. To do this, Representative Volume Elements are randomly generated to represent the structure of yarns made from continuous filaments of synthetic materials. Furthermore, parallel, randomly arranged fibers with a circular cross-section are assumed. By solving the so-called cell problems on the Representative Volume Elements, transport coefficients can be calculated for given porosities. These transport coefficients, which are based on a digital reconstruction of the yarn and asymptotic homogenization, are then used to derive an improved correlation for the effective diffusivity and permeability as a function of porosity and fiber diameter. At porosities below 0.7, the predicted transport is significantly lower under the assumption of random ordering. The approach is not limited to circular fibers and may be extended to arbitrary fiber geometries.
In this study, we investigate the temporal and spatial evolution of wetting saturation during spontaneous imbibition in anisotropic fibrous porous media using both experimental and numerical methods. We present a novel experimental approach to systematically study spontaneous imbibition in these media, allowing for a comprehensive assessment of how microstructure influences wicking performance. The experimental method, which exhibits high reproducibility, was used to validate the numerical model. The numerical model was parameterized using only the porosity and filament diameter of the porous media in conjunction with the material properties of the imbibing fluid. The essential capillary saturation curve for the numerical model was derived using the pore morphology method. The numerical results effectively replicated the experimental results. Our experimental and numerical observations revealed a diffusive wetting front within the porous media, which progressively expanded and decelerated during the imbibition process. The results highlight the significant influence of filament size on the wetting saturation dynamics and the height of the wetting front during spontaneous imbibition.
The kinetics of liquid transport in textiles are determined by the thermodynamic boundary conditions and the substrate’s structure. The knitting process offers a wide range of possibilities for modifying the fabric structure, making it ideal for high-performance garments and technical applications. Given the highly complex nature of textiles’ interaction with liquids, this paper investigates how fabric structure affects combined wicking and drying behaviour. This facilitates comprehension of the underlying transport processes on the yarn and fabric scale, which is important for understanding the behaviour of the material as a whole. The presented experiment combines analysis of wicking through radial liquid spread using imaging techniques and analysis of the drying process through gravimetric measurement of evaporation. Eight samples of single jersey knitted fabrics were produced using polyester yarns of different texturization and fibre diameters on flat and circular knitting machines. The fabrics demonstrate significantly different wicking behaviours depending on their structure. The fabric’s drying time and rate are directly linked to the macroscopic spread of the liquid. Large inter-yarn pores hinder liquid spread. For the lowest liquid saturations, the yarn structure plays a critical role. Using fine, dense yarns can hinder convective drying within the yarn. Textured yarns tend to exhibit higher specific drying rates. The results offer a comprehensive insight into the interplay between the fabric’s structure and its wicking and drying behaviour, which is crucial for the development of functional fabrics in the knitting process.
Pore sizes on the micrometre scale are a critical factor influencing the fluid transport properties of textiles. Consequently, the pore size distribution function is a desirable parameter in the design of textiles for technical applications. However, the experimental determination of pore size and its distribution can be challenging, costly, or impractical. Knitted fabrics offer a wide range of porosity and pore size distribution properties. While statistical models have shown reasonable accuracy in predicting pore size distributions in nonwovens and filter media, no equivalent model exists for twist-texturized yarns and single-jersey knitted fabrics. This study presents a hierarchical pore model for single-jersey fabrics. The model uses a log-normal distribution for the intra-yarn pores in the yarn and cylindrical pores for inter-yarn pores between the yarns in the fabric. With these two pore sizes, the model quantitatively characterises the porous structure of the fabric. Initial validation of the model for intra-yarn pores on four yarns of different fibre finenesses shows that the model can cover the influence of different fibre counts. For the validation on the fabric scale, two tomography datasets of single-jersey knitted fabrics show that the presented model can capture the effect of different fabric structures. A parameter study visualises the effects of both yarn and knitting parameters on the pore size distribution function of single-jersey knitted fabrics. The mean pore sizes of the fabrics are given. The results deepen the understanding of the porous properties of knitted fabrics and provide a valuable direction for structural fabric development on knitting machines.