The world’s energy demand is steadily increasing where it has now become difficult for conventional hydrocarbon reservoir to meet levels of demand. Therefore, oil and gas companies are seeking novel ways to exploit and unlock the potential of unconventional resources. These resources include tight gas reservoirs, tight sandstone oil, oil and gas shales reservoirs, and high pressure high temperature (HPHT) wells. Drilling of HPHT wells and shale reservoirs has become more widespread in the global petroleum and natural gas industry. There is a current need to extend robust techniques beyond costly drilling and completion jobs, with the potential for exponential expansion. Drilling fluids and their additives are being customized in order to cater for HPHT well drilling issues. Certain conventional additives, e.g., filtrate loss additives, viscosifier additives, shale inhibitor, and shale stabilizer additives are not suitable in the HPHT environment, where they are consequently inappropriate for shale drilling. A better understanding of the selection of drilling fluids and additives for hydrocarbon water-sensitive reservoirs within HPHT environments can be achieved by identifying the challenges in conventional drilling fluids technology and their replacement with eco-friendly, cheaper, and multi-functional valuable products. In this regard, several laboratory-scale literatures have reported that nanomaterial has improved the properties of drilling fluids in the HPHT environment. This review critically evaluates nanomaterial utilization for improvement of rheological properties, filtrate loss, viscosity, and clay- and shale-inhibition at increasing temperature and pressures during the exploitation of hydrocarbons. The performance and potential of nanomaterials, which influence the nature of drilling fluid and its multi-benefits, is rarely reviewed in technical literature of water-based drilling fluid systems. Moreover, this review presented case studies of two HPHT fields and one HPHT basin, and compared their drilling fluid program for optimum selection of drilling fluid in HPHT environment.
1 June 2018 in IOP Conference Series: Materials Science and Engineering
Nanotechnology have vast potentials for applications in oil & gas industry. Nanoparticles are ultra-fine in nature, usually larger than an atom cluster but smaller than ordinary micro particles and thus have very high specific surface area with enormous potential interactions with its surroundings. In fact, some nanoparticles exhibit high thermal conductivity ability and affinity to acid gases. These traits and features possessed by nanomaterials intrigues the industry players and makes them zoomed on its potential application in the industry. In this study, the potentials of nanomaterials application in formulating "smart" drilling fluids for deep well drilling operations are discussed. Major deep well drilling fluid related challenges such as narrow drilling tolerance window, HPHT environment, excessive fluid loss and extensive formation damage, wellbore stability issues, differential sticking and low rate of penetration could be addressed through the addition of specific functionally tailored nanoparticles in the fluid formulation. It has been proven at least experimentally in laboratories and some minor field applications that addition of nanomaterials to the formulation would bring positive impacts on the plastic viscosity, yield strength, gel strength, filtrate loss volume and the lubricating effects of drilling fluids, making them feasible to be used in addressing the challenges in deep well drilling operations as discussed in this project paper. Due to the rheological enhancements, nano-fluids application is deemed technically feasible, cost effective and more environmental friendly due to the low concentrations requirement, in formulating smart fluids that could help to combat and address the major and prominent challenges in deep well drilling operations.
Particles and fluids invasion into the pore spaces causes serious damage to the formation, resulting reduction in petroleum production. In order to prevent permeability damage for a well effectively, the damage mechanisms should be identified. In this study, water-based drilling fluid was compared to oil-based drilling fluids based on microscopic observation. The cores were damaged by several drilling fluid systems. Scanning electron microscope (SEM) was used to observe the damage mechanism caused by the drilling fluids. Results showed that the ester based drilling fluid system caused the most serious damage followed by synthetic oil based system and KCI-polymer system. Fine solids and filtrate migration and emulsion blockage are believed to be the major mechanisms controlling the changes in flow properties for the sandstone samples.
Formulating a good drilling fluid is the key factor to the success of any drilling operation. There are many problems that occur during drilling operations that reduce the efficiency of the mud such as low lubricity problems. Oil based mud (OBM) can be used to reduce the effects of the mentioned problem compared to water-based mud (WBM). However, due to the environmental and economic factors, the usage of OBM is limited. Hence, this study was conducted to improve the lubricity of WBM using nanomaterials. Two nanomaterials have been used which are graphene nanoparticles (GNP) and titanium dioxide (TiO2) with varying the concentration from 0 – 1.0 g. The rheological properties, API filtration and mud cake thickness at room temperature and after aging at 250⁰F for 16 hours were tested. It was found that the addition of nanomaterials reduced the coefficient of friction (CoF) of the WBM up to 35%, where the reduction increased with raising the concentration. GNP showed more prospective reduction of CoF of WBM compared to titanium dioxide.