Water contaminated with arsenic is a worldwide problem. This review presents the arsenic contamination in groundwater, its sources, and possible health risk to humans. Groundwater pollution is the most common route of inorganic arsenic exposure in humans. Arsenic concentrations in different countries were analyzed and projected on a map. Because arsenic is widely spread throughout the Earth’s crust, it is present in trace amounts in practically all waterways. Harmful levels of this toxin have been identified in drinking water in some regions. For drinking purposes, the majority of people use groundwater; excess arsenic levels in groundwater have been linked to a variety of negative health impacts on people. Arsenic exposure is the world’s leading environmental cause of cancer. The main aim of this review is to summarize the effective technologies to remove arsenic from drinking water, such as ion exchange, coagulation/flocculation, and membrane technologies like ultra-filtration and electrodialysis, helping to deal with the adverse effects caused by arsenic exposure. All these technologies present different advantages and disadvantages. Electrocoagulation, adsorption, and phytoremediation are the most efficient and cost-effective technologies. The removal efficiencies of arsenic using these technologies and prospects were also included.

Membrane technology has been embraced as a feasible and suitable substitute for conventional time- and energy-intensive biodiesel synthesis processes. It is ecofriendly, easier to run and regulate, and requires less energy than conventional approaches, with excellent stability. Therefore, the present study involved the synthesis and application of a highly reactive and recyclable Titania-based heterogeneous nanocatalyst (TiO₂) for biodiesel production from nonedible Azadhiracta indica seed oil via a membrane reactor, since Azadhiracta indica is easily and widely accessible and has a rich oil content (39% w/w). The high free fatty acids content (6.52 mg/g KOH) of the nonedible oil was decreased to less than 1% via two-step esterification. Following the esterification, transesterification was performed using a heterogeneous TiO₂ nanocatalyst under optimum conditions, such as a 9:1 methanol–oil molar ratio, 90 °C reaction temperature, 2 wt.% catalyst loading, and an agitation rate of 600 rpm, and the biodiesel yield was optimized through response surface methodology (RSM). Azadhiracta indica seed oil contains 68.98% unsaturated (61.01% oleic acid, 8.97% linoleic acid) and 31.02% saturated fatty acids (15.91% palmitic acid, 15.11% stearic acid). These fatty acids transformed into respective methyl esters, with a total yield up to 95% achieved. The biodiesel was analyzed via advanced characterization techniques like gas chromatography–mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance (NMR), whereas the catalyst was characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and Fourier transform infrared spectroscopy (FT-IR). Due to its physicochemical properties, Azadirachta indica seed oil is a highly recommended feedstock for biodiesel production. Moreover, it is concluded that the Titania-based heterogeneous nanocatalyst (TiO₂) is effective for high-quality liquid fuel synthesis from nonedible Azadirachta indica seed oil in a membrane reactor, which could be an optional green route to cleaner production of bioenergy, eventually leading to sustenance, robustness, and resilience that will aid in developing a holistic framework for integrated waste management.

Six Amaranthus species (A. cruentus, A. hybridus, A. hypochondriacus, A. muricatus, A. tuberculatus, and A. viridis) were collected in Italy (wild habitats) from crops and roadsides. Amaranth seed oil was extracted to obtain fractions rich in squalene. Squalene, free fatty acid, tocopherol, and sterol composition and content were investigated in detail. An analysis of variance and principal components was performed. The oil content in the seed ranged from 5.17% (A. muricatus) to 12.20% (A. tuberculatus). The quantity of squalene in the oil varied from 3.43% (A. muricatus) to 6.09% (A. hypochondriacus). The primary sterols were beta-sitosterol, brassicasterol, campesterol, and stigmasterol. The main tocopherols in all the samples were alfa-tocopherol, beta-tocopherol, and delta-tocopherol. Our results exhibited that the smallest seeds (A. tuberculatus) have the highest percentages of oil and squalene, whereas the largest seeds size (A. muricatus) show the lowest percentages. There is also evidence that the samples growing at lower altitudes show the highest concentration of fatty acids. According to our results, the six wild Amaranthus species exhibited similar characteristics to commercial species. This study confirms that the site of the collection has an impact on the oil and squalene content of the Amaranthus species.